Effect of electrolytes on the cloud point of chlorpromazine hydrochloride solutions

Cloud point (CP) phenomenon occurring in amphiphilic drug chlorpromazine hydrochloride (CPZ) solutions with and without salts is reported herein. The CP of a 50mM CPZ solution (prepared in 10mM sodium phosphate, SP, buffer) was found to decrease with increasing pH, both in the absence as well as presence (50mM) of added salts (NaCl, NaBr, LiBr, KBr, tetra-n-butylammonium bromide). Whereas, at a fixed concentration of NaCl, the CP increased with increasing CPZ concentration, addition of increasing amounts of salts (NaF, NaCl, NaBr, LiCl, KCl) to 50mM CPZ solution (at pH 6.7) caused continuous increase in CP. On the basis of these studies the binding-effect orders of counterions and co-ions have been deduced, respectively, as: Br(-)>Cl(-)>F(-) and Li(+)>Na(+)>K(+). The similar trend of increasing CP with addition of increasing amounts of quaternary bromides (tetramethylammonium bromide, TMeAB; tetraethylammonium bromide, TEtAB; tetra-n-propylammonium bromide, TPrAB; tetra-n-butylammonium bromide, TBuAB; tetra-n-pentylammonium bromide, TPeAB) to 50mM CPZ solutions (at pH 6.7) was found to be dependent upon the alkyl chain length of the particular salt. The overall behaviour has been discussed in terms of electrostatic interactions, micellar growth, and mixed micelle formation.     

Performance investigation of 110-Gbps optical MSK system using a Quad Mach-Zehnder IQ modulator

In this paper, numerical simulation is conducted to investigate the generation, transmission and detection of a 110 Gbps optical Minimum Shift Keying (MSK) signal. The transmitter has been designed using a Quad Mach-Zehnder IQ Modulator. At the transmitter, a 110 Gbps optical MSK signal with constant envelope and a continuous phase is generated by combining signals of I-arm and \(90^\circ\) phase shifted of Q-arm. Error-free transmission of 110 Gbps optical MSK signal is achieved after traversing a distance of 240 km, also a comparison is made with respect to Differential Phase Shift Keying (DPSK) to show its effectiveness. At the receiver side, the original signal is recovered through a balanced detection method, with a power penalty of around 3.34 dB. Also, BER curves of different bit rates for MSK are studied ranging from 40 to 120 Gbps and found that maximum 110 Gbps can be achieved error-free. The optical spectrum of both MSK and DPSK signals are observed and found that MSK is having narrower main lobes with smaller side lobes compared with that of DPSK, which in turn results in an increase in spectral efficiency and reduction in intersymbol interference.     

Dispersion characteristics of complex refractive-index planar slab optical waveguide by using finite element method

In this paper, finite element method (FEM) mode analyses of planar slab optical waveguide having complicated refractive index profile are presented. We try to estimate the dispersion graph, mode cut-off condition, group delay and waveguide dispersion for the case of α-power and chirped-type refractive index profile. In order to obtain the more accurate result, we have derived the higher-order polynomial, which establishes the suitable relationship between b and V for different profile of optical waveguide. On the basis of the derived polynomials, the waveguide dispersion is analyzed for different type of refractive index profile waveguide. Our study shows that the waveguide dispersion can be substantially reduced when we deployed the optical waveguide having linearly chirped-type refractive index profile. Earlier too, the arbitrary refractive index profile has been analyzed but to the best of our knowledge chirped-type refractive index profile has not been analyzed till date for the case of planar slab optical waveguide.     

Possibility of room-temperature multiferroism in Mg-doped ZnO

Room-temperature multiferroic properties in Mg-doped ZnO samples are reported wherein Mg replaces Zn in the ZnO matrix and retains hexagonal wurtzite structure. The saturation magnetisation is increased from ～2×10^?4 emu/g to 3×10^?4 emu/g for the dilute doping of 2 % Mg in pure ZnO and the ferroelectricity is also increased. Higher concentration of Mg does not lead to a significant enhancement in the magnetisation but improves the ferroelectric properties. An X-ray absorption spectroscopic study shows an enhancement in O vacancies with dilute doping of Mg. The origin of the multiferroic behaviour is understood based on their crystal and electronic structures.     

Nitric oxide reactivity of copper(II) complexes of bidentate amine ligands: effect of chelate ring size on the stability of a [Cu(II)-NO] intermediate

Three copper(II) complexes, 1, 2, and 3 with L(1), L(2) and L(3) [L(1) = 2-(2-aminoethyl)-pyridine; L(2) = 2-(N-ethyl-2-aminoethyl)-pyridine; L(3) = 3,3'-iminobis(N,N-dimethylpropylamine)], respectively, were synthesized and characterized. Addition of nitric oxide gas to the degassed acetonitrile solution of the complexes were found to result in the reduction of the copper(II) center to copper(I). In cases of complexes 1 and 2, the formation of the [Cu(II)-NO] intermediate prior to the reduction of Cu(II) was evidenced by UV-visible, solution FT-IR and X-band EPR spectroscopic studies. However, for complex 3, the formation of [Cu(II)-NO] has not been observed. DFT calculations on the [Cu(II)-NO] intermediate generated from complex 1 suggest a distorted square pyramidal geometry with the NO ligand coordinated to the Cu(II) center at an equatorial site in a bent geometry. In the case of complex 1, the reduction of the copper(II) center by nitric oxide afforded ligand transformation through diazotization at the primary amine site in acetonitrile solution; whereas, in an acetonitrile-water mixture, it resulted in 2-(pyridine-2-yl)ethanol. On the other hand, in cases of complexes 2 and 3, it was found to yield N-nitrosation at the secondary amine site in the ligand frameworks. The final organic products, in each case, were isolated and characterized by various spectroscopic studies.     

Copper(ii) complexes as turn on fluorescent sensors for nitric oxide

Two copper(ii) complexes, 1 and 2, of two tridentate N-donor ligands, L(1) and L(2) [L(1) = dansyl derivative of bis-[3-(dimethylamino)-propyl]amine; L(2) = dansyl derivative of dipropylenetriamine] were synthesized and characterized. The quenched fluorescence intensity of complexes 1 and 2, in degassed methanol or aqueous (buffered at pH 7.2) solution, was found to reappear on exposure to nitric oxide. This is attributed to the reduction of paramagnetic Cu(ii) center by nitric oxide to diamagnetic Cu(i).     

Identification and structural elucidation of two process impurities and stress degradants in darifenacin hydrobromide active pharmaceutical ingredient by LC-ESI/MS(n)

The present study describes the identification and characterization of two process impurities and major stress degradants in darifenacin hydrobromide using high performance liquid chromatography (HPLC) analysis. Forced degradation studies confirmed that the drug substance was stable under acidic, alkaline, aqueous hydrolysis, thermal and photolytic conditions and susceptible only to oxidative degradation. Impurities were identified using liquid chromatography coupled with ion trap mass spectrometry (LC-MS/MS(n)). Proposed structures were unambiguously confirmed by synthesis followed by characterization using nuclear magnetic resonance spectroscopy (NMR), infrared spectroscopy (IR) and elemental analysis (EA). Based on the spectroscopic, spectrometric and elemental analysis data, the unknown impurities were characterized as 2-{1-[2-(2,3-dihydrobenzofuran-5-yl)-2-oxo-ethyl]-pyrrolidin-3-yl}-2,2-diphenylacetamide (Imp-A), 2-[1-(2-benzofuran-5-yl-ethyl)-pyrrolidin-3-yl]-2,2-diphenylacetamide (Imp-B), 2-{1-[2-(2,3-dihydrobenzofuran-5-yl)-ethyl]-1-oxy-pyrrolidin-3-yl}-2,2-diphenylacetamide (Imp-C) and 2-{1-[2-(7-bromo-2,3-dihydrobenzofuran-5-yl)-ethyl]-pyrrolidin-3-yl}-2,2-diphenylacetamide (Imp-D). Plausible mechanisms for the formation and control of these impurities have also been proposed. The method was validated as per regulatory guidelines to demonstrate specificity, sensitivity, linearity, precision, accuracy and the stability-indicating nature. Regression analysis showed a correlation coefficient value greater than 0.99 for darifenacin hydrobromide and its impurities. The accuracy of the method was established based on the recovery obtained between 86.6 and 106.7% for all impurities.     

Monodisperse Co,Zn-Ferrite nanocrystals: Controlled synthesis,characterization and magnetic properties

Co_xZn_yFe_3−x−yO₄ ferrite (x=1 to 0; y=0 to1) nanocrystals have been synthesized by reverse microemulsion method. The nanocrystals are then comprehensively characterized by X-ray diffraction, Fourier transform infrared spectroscopy, Field emission transmission electron microscopy (FETEM), and magnetic properties were measured by using Vibrating sample magnetometer. X-ray analysis showed that all the crystals were cubic spinel. The lattice constant increased with the increase in Zn substitution. FETEM reveals that particle size varies in the range from 3 to 6 nm. As the concentration of Zn increases the magnetic behavior varies from ferromagnetic at y=0 and 0.2 to superparamagnetic to paramagnetic at y=1. The Curie temperature decreases with increasing concentration of Zn.     

Highly sensitive LC-MS/MS-ESI method for simultaneous quantitation of albendazole and ricobendazole in rat plasma and its application to a rat pharmacokinetic study

A highly sensitive and specific LC-MS/MS-ESI method was developed for simultaneous quantification of albenadazole (ABZ) and ricobendazole (RBZ) in rat plasma (50 μL) using phenacetin as an internal standard (IS). Simple protein precipitation was used to extract ABZ and RBZ from rat plasma. The chromatographic resolution of ABZ, RBZ and IS was achieved with a mobile phase consisting of 5 m m ammonium acetate (pH 6) and acetonitrile (20:80, v/v) at a flow rate of 1 mL/min on a Chromolith RP-18e column. The total chromatographic run time was 3.5 min and the elution of ABZ, RBZ and IS occurred at 1.66, 1.50 and 1.59 min, respectively. A linear response function was established for the ranges of concentrations 2.01-2007 and 6.02-6020 ng/mL for ABZ and RBZ, respectively. The intra- and inter-day precision values for ABZ and RBZ met the acceptance as per FDA guidelines. ABZ and RBZ were stable in battery of stability studies, viz. bench-top, auto-sampler and freeze-thaw cycles. The developed assay was applied to a pharmacokinetic study in rats.