DLTS and in situ C–V analysis of trap parameters in swift 50 MeV Li3+ ion-irradiated Ni/SiO2/Si MOS capacitors

Ni/SiO₂/Si MOS structures were fabricated on n-type Si wafers and were irradiated with 50 MeV Li³⁺ ions with fluences ranging from 1×10¹⁰ to 1×10¹² ions/cm². High frequency C–V characteristics are studied in situ to estimate the build-up of fixed and oxide charges. The nature of the charge build-up with ion fluence is analyzed. Defect levels in bulk Si and its properties such as activation energy, capture cross-section, trap concentration and carrier lifetimes are studied using deep-level transient spectroscopy. Electron traps with energies ranging from 0.069 to 0.523 eV are observed in Li ion-irradiated devices. The dependence of series resistance, substrate doping and accumulation capacitance on Li ion fluence are clearly explained. The study of dielectric properties (tan δ and quality factor) confirms the degradation of the oxide layer to a greater extent due to ion irradiation.     

Montmorillonite-based ceramic membranes as novel lithium-ion battery separators

Novel montmorillonite-based ceramic membrane (CM) has been prepared with poly(vinylidene fluoride-co-hexafluoropropene) (PVdF-HFP) copolymer as binder. Physical properties such as surface morphology, porosity, liquid electrolyte uptake and thermal stability were analysed. The ceramic membrane was activated by soaking it in a non-aqueous liquid electrolyte (1.0 M LiPF₆ solution in 1/1 v/v ethylene carbonate/diethyl carbonate mixture) for 10 min. The compatibility of the membrane with lithium metal anode as a function of storage time was analysed by assembling a Li/CM/Li symmetric cell. Finally, a lab-scale cell composed of Li/CM/LiFePO₄ is assembled and its cycling performance analysed at different C-rates. Although the ceramic membrane is not flexible, it shows high thermal stability and stable interfacial properties when in contact with the lithium metal anode. A stable cycling behaviour is demonstrated even at 1C-rate with limited fade in capacity.     

Role of Cu-doping in CdTe thin films: Experiments and simulations

Due to its outstanding physical properties, CdTe is used to fabricate high efficiency solar cells. However, its high work function poses a challenge, and hence, to fabricate an efficient CdTe-based solar cell, Cu-doping may be useful. Here, we present the role of temperature-dependent Cu-doping in radio frequency sputter-deposited CdTe films and the related changes occurring in their optical, electrical, structural and microstructural properties. For instance, Cu-doping at different temperatures leads to an increase in the grain size and a reduction in the optical reflectance with increasing temperature. In addition, Kelvin probe force microscopy measurements reveal that the work function is found to be smaller corresponding to the annealing temperature of 473 K, whereas resistivity measurements show that it decreases with increasing temperature (the lowest value of resistivity is found to be 1.8 × 10⁻² Ω-cm). To understand the electronic structure of CdTe before and after Cu-doping, we have carried out first-principles density functional theory (DFT) simulation, which reveals a strong hybridization among Cu, Cd and Te atoms. This study paves the way to fabricate efficient Cu-doped CdTe-based solar cells.     

Fragmentation patterns of newly isolated cassane butenolide diterpenes and differentiation of stereoisomer by tandem mass spectrometry

Different stereoisomers of active molecules often cause different physiological responses and hence pose a challenge for their identification. This study involves perceptive fragmentation behavior of newly isolated cassane butenolides, caesalpinolide A [1] and caesalpinolide B [2] (epimeric at the hemiketal position) by tandem MS. The electrospray ionization-mass spectrometry (ESI-MS)/collision-induced dissociation (CID; ESI-MS(2) and ESI-IT-MS(n)) were investigated. The effect of orientations of hemiketal hydroxyl at C-12 was clearly observed in the mass spectrum. Tandem mass spectra of 1, 1(A) or 2, 2(A) show stereospecific fragmentation resulting in significant abundance dissimilarity of [MH - H(2)O](+) as well as differences in fragmentation pathway. Both of these pathways seem to be influenced by the stereochemistry of the molecule. The differentiation can be clearly visualized from the [M + H - H(2)O](+)/[M + H](+) ratio of the two isomers where beta-isomer 2 was found to be five times higher than that of alpha-isomer 1 in full scan liquid chromatography-electrospray ionization mass spectrometry(LC-ESI-MS). In high-energy CID, the mass fingerprint of 1, 2, 1(A), and 2(A) was found to be different from one another.     

Steady State and Time Resolved Spectroscopic Study of CdSe and CdSe/ZnS QDs:FRET Approach

This article highlights some physical studies on the relaxation dynamics and Förster resonance energy transfer (FRET) of semiconductor quantum dots (QDs) to proximal dye molecule and the way these phenomena change with core to core-shell QD is discussed. Efforts to understand the optical and carrier relaxation dynamics of CdSe and CdSe/ZnS QDs are made by using absorption, steady-state fluorescence and time-resolved fluorescence (TCSPC) techniques. Steady-state as well as time-resolved fluorescence measurements were employed to evaluate the QD PL quenching induced by the proximal Rhodamine 101 dye molecule and to examine the influence of deep trap states on energy transfer efficiency. The FRET parameters such as spectral overlap, Förster distance, intermolecular distance for each donor-acceptor pair are determined and variation of these parameters from core to core-shell QD is discussed.     

A photodimerization approach to crosslink and functionalize microgels

Microgels were prepared within reverse micelles via photocrosslinking. Gelation resulted from the [2 + 2] photodimerization reaction of nitrocinnamoyl (NC) groups on multi-arm polyethylene glycol (PEG) or gelatin. Because of the potential for biomedical and chemical applications, immobilization capacity within the microgels was investigated. Quantum dots (QDs), for example, share a similar size scale with proteins and can be physically trapped within the microgels. In addition, the optoelectronic properties of QDs could be utilized for analytical, imaging, and therapeutic purposes. Small molecules and recognition sequences (e.g. biotin) can also be covalently immobilized within the microgel networks through the photodimerization reaction. In the presence of biotin-PEG-NC, the resulting microgels added to streptavidin-coated plates. The microgel properties such as biodegradability and degree of swelling may be engineered for particular applications including targeted monitoring and controlled drug delivery systems.     

Lie-optics, geometrical phase and nonlinear dynamics of self-focusing and soliton evolution in a plasma

It is useful to state propagation laws for a self-focusing laser beam or a soliton in group-theoretical form to be called Lie-optical form for being able to predict self-focusing dynamics conveniently and amongst other things, the geometrical phase. It is shown that the propagation of the gaussian laser beam is governed by a rotation group in a non-absorbing medium and by the Lorentz group in an absorbing medium if the additional symmetry of paraxial propagation is imposed on the laser beam. This latter symmetry, however, needs care in its implementation because the electromagnetic wave of the laser sees a different refractive index profile than the laboratory observer in this approximation. It is explained how to estimate this non-Taylor paraxial power series approximation. The group theoretical laws so-stated are used to predict the geometrical or Berry phase of the laser beam by a technique developed by one of us elsewhere. The group-theoretical Lie-optic (or ABCD) laws are also useful in predicting the laser behavior in a more complex optical arrangement like in a laser cavity etc. The nonlinear dynamical consequences of these laws for long distance (or time) predictions are also dealt with. Ergodic dynamics of an ensemble of laser beams on the torus during absorptionless self-focusing is discussed in this context. From the point of view of new physics concepts, we introduce a stroboscopic invariant torus and a stroboscopic generating function in classical mechanics that is useful for long-distance predictions of absorptionless self-focusing.     

Generation of an arbitrary chirped microwave waveform with high time-bandwidth product for increasing range resolution of RADAR by using photonic technique

An approach for photonic generation of an arbitrary chirped microwave waveform with an increased time-bandwidth product (TBWP) is proposed and experimentally demonstrated. In the proposed model, light from the mode locked laser is splitted into two parts by using 1 × 2 power splitter: one is sent to linearly chirped fiber Bragg grating (LCFBG) through circulator and the other is time delayed by fiber delay line. The optical pulse in upper arm is time stretched by the LCFBG. Meanwhile, the optical pulse in lower arm experiences a time delay and then stretched by the dispersive single mode fiber. Temporal interference pattern is generated with an increasing or decreasing free spectral range by combination of two time-stretched optical pulses. Finally, the temporal interference pattern which is obtained at the output of optical coupler is transformed into an arbitrary chirped microwave waveform by using a photo-detector. The main advantage of this proposed model is high TBWP in the range of 750–1000 which ultimately results in an increased range resolution of radio detection and ranging.