MnO2/TiN heterogeneous nanostructure design for electrochemical energy storage

MnO(2)/TiN nanotubes are fabricated using facile deposition techniques to maximize the surface area of the electroactive material for use in electrochemical capacitors. Atomic layer deposition is used to deposit conformal nanotubes within an anodic aluminium oxide template. After template removal, the inner and outer surfaces of the TiN nanotubes are exposed for electrochemical deposition of manganese oxide. Electron microscopy shows that the MnO(2) is deposited on both the inside and outside of TiN nanotubes, forming the MnO(2)/TiN nanotubes. Cyclic voltammetry and galvanostatic charge-discharge curves are used to characterize the electrochemical properties of the MnO(2)/TiN nanotubes. Due to the close proximity of MnO(2) with the highly conductive TiN as well as the overall high surface area, the nanotubes show very high specific capacitance (662 F g(-1) reported at 45 A g(-1)) as a supercapacitor electrode material. The highly conductive and mechanically stable TiN greatly enhances the flow of electrons to the MnO(2) material, while the high aspect ratio nanostructure of TiN creates a large surface area for short diffusion paths for cations thus improving high power. Combining the favourable structural, electrical and energy properties of MnO(2) and TiN into one system allows for a promising electrode material for supercapacitors.     

Metal ion coordination with an asymmetric fan-shaped dendrimer at the air-water interface

Metal coordination to monolayers of 4-{10-[4-(3,5-bis-benzyloxy)-phenyl]-anthracen-9-yl}-benzoic acid ([G1-An]-CO(2)H, G1) and 4-(10-{4-[3,5-bis-(3,5-bis-benzyloxy)-benzyloxy]-phenyl}-anthracen-9-yl)-benzoic acid ([G2-An]-CO(2)H, G2) at the air-water interface and to Langmuir-Blodgett (LB) films was investigated using surface pressure-area isotherms, ultraviolet-visible (UV-vis) spectroscopy, atomic force microscopy (AFM), and X-ray reflectivity (XRR). Surface pressure-area isotherms show that G1 and G2 have different limiting areas according to the type of subphase. The limiting area of G1 and G2 increased more with Al(3+) than with Eu(3+) in the subphase. This result indicates that the hydrophilic core group is anchored to ions in the water via bidentate chelates with the carboxylate oxygen atoms of G1 and G2. Circular domains and aggregates were observed for the LB film. The different behavior of Eu(3+) and Al(3+) complexes is originated from the intrinsic nature of the ion, i.e., coordination number.     

Parthenolide-induced apoptosis of hepatic stellate cells and anti-fibrotic effects in an in vivo rat model

Parthenolide (PT), a sesquiterpene lactone derived from the plant feverfew, has pro-apoptotic activity in a number of cancer cell types. We assessed whether PT induces the apoptosis of hepatic stellate cells (HCSs) and examined its effects on hepatic fibrosis in an in vivo model. The effects of PT on rat HSCs were investigated in relation to cell growth inhibition, apoptosis, NF-κB binding activity, intracellular reactive oxygen species (ROS) generation, and glutathione (GSH) levels. In addition, the anti-fibrotic effects of PT were investigated in a thioacetamide-treated rat model. PT induced growth inhibition and apoptosis in HSCs, as evidenced by cell growth inhibition and apoptosis assays. PT increased the expression of Bax proteins during apoptosis, but decreased the expression of Bcl-2 and Bcl-X(L) proteins. PT also induced a reduction in mitochondrial membrane potential, poly(ADP-ribose) polymerase cleavage, and caspase-3 activation. PT inhibited TNF-α-stimulated NF-κB binding activity in HSCs. The pro-apoptotic activity of PT in HSCs was associated with increased intracellular oxidative stress as evidenced by increased intracellular ROS levels and depleted intracellular GSH levels. Furthermore, PT ameliorated hepatic fibrosis significantly in a thioacetamide- treated rat model. In conclusion, PT exhibited pro-apoptotic effects in rat HSCs and ameliorated hepatic fibrosis in a thioacetamide-induced rat model.     

Spectroscopic observation of jet-cooled 2-fluoro-m-xylyl radical

The jet-cooled 2-fluoro-m-xylyl radical was generated and vibronically excited in a corona excited supersonic expansion from precursor 2-fluoro-m-xylene seeded in a large amount of carrier gas helium. The well-resolved visible vibronic emission spectrum of the jet-cooled 2-fluoro-m-xylyl radical was recorded using a long-path monochromator. From the analysis of the spectrum, we determine an accurate electronic energy of the D(1) → D(0) transition and the frequencies of vibrational modes in the ground electronic state by comparison with those of ab initio calculations and the known spectroscopic data of 2-fluoro-m-xylene for the first time.     

High-mobility field-effect transistors from large-area solution-grown aligned C60 single crystals

Field-effect transistors based on single crystals of organic semiconductors have the highest reported charge carrier mobility among organic materials, demonstrating great potential of organic semiconductors for electronic applications. However, single-crystal devices are difficult to fabricate. One of the biggest challenges is to prepare dense arrays of single crystals over large-area substrates with controlled alignment. Here, we describe a solution processing method to grow large arrays of aligned C(60) single crystals. Our well-aligned C(60) single-crystal needles and ribbons show electron mobility as high as 11 cm(2)V(-1)s(-1) (average mobility: 5.2 ± 2.1 cm(2)V(-1)s(-1) from needles; 3.0 ± 0.87 cm(2)V(-1)s(-1) from ribbons). This observed mobility is ~8-fold higher than the maximum reported mobility for solution-grown n-channel organic materials (1.5 cm(2)V(-1)s(-1)) and is ~2-fold higher than the highest mobility of any n-channel organic material (~6 cm(2)V(-1)s(-1)). Furthermore, our deposition method is scalable to a 100 mm wafer substrate, with around 50% of the wafer surface covered by aligned crystals. Hence, our method facilitates the fabrication of large amounts of high-quality semiconductor crystals for fundamental studies, and with substantial improvement on the surface coverage of crystals, this method might be suitable for large-area applications based on single crystals of organic semiconductors.     

Angiopoietin-1 variant, COMP-Ang1 attenuates hydrogen peroxide-induced acute lung injury

Reactive oxygen species (ROS) play a crucial role in acute lung injury. Tissue inflammation, the increased vascular permeability, and plasma exudation are cardinal features of acute lung injury. Angiopoietin-1 (Ang1) has potential therapeutic applications in preventing vascular leakage and also has beneficial effects in several inflammatory disorders. Recently developed COMP-Ang1 is more potent than native Ang1 in phosphorylating tyrosine kinase with immunoglobulin and EGF homology domain 2 receptor in endothelial cells. However, there are no data on effects and related molecular mechanisms of COMP- Ang1 on ROS-induced acute lung injury. We used hydrogen peroxide (H2O2)-inhaled mice to evaluate the effect of COMP-Ang1 on pulmonary inflammation, bronchial hyper-responsiveness, and vascular leakage in acute lung injury. The results have revealed that VEGF expression, the levels of IL-4, TNF-alpha, IL-1beta, intercellular adhesion molecule-1, and vascular cell adhesion molecule-1 in lungs, the levels of hypoxia-inducible factor-1alpha (HIF-1alpha) and NF-kappaB in nuclear protein extracts, phosphorylation of Akt, and vascular permeability were increased after inhalation of H2O2 and that the administration of COMP-Ang1 markedly reduced airway hyper-responsiveness, pulmonary inflammation, plasma extravasation, and the increases of cytokines, adhesion molecules, and VEGF in lungs treated with H2O2. We have also found that the activation of HIF-1a and NF-kB and the increase of phosphoinositide 3-kinase activity in lung tissues after H2O2 inhalation were decreased by the administration of COMP-Ang1. These results suggest that COMP-Ang1 ameliorates ROS-induced acute lung injury through attenuating vascular leakage and modulating inflammatory mediators.     

Hydrothermal synthesis of a nano-rod mercury(ii) metal-ligand coordination compound

A novel nano-rod mercury(II) coordination compound [Hg (BINH)I₂] (1), (BINH is the abbreviation of benzylideneisonicotinohydrazide) is synthesized by a hydrothermal method that produces the coordination compound at a nanosize level. The new nanostructure is characterized by scanning electron microscopy, powder X-ray diffraction, elemental analysis, and IR spectroscopy. Compound 1 was structurally characterized by single crystal X-ray diffraction and the single-crystal structure of this complex shows that each mercury(II) center is four-coordinated with two N-donor atoms from tow BINH ligands and tow iodo anions. Self-assembly of this complexes is pereformed by CH?I and π-π stacking interactions. The supramolecular features in these complexes are controlled by weak directional intermolecular interactions.     

Therapeutic Targeting of Oncogenic K‐Ras by a Covalent Catalytic Site Inhibitor

We report the synthesis of a GDP analogue, SML‐8‐73‐1, and a prodrug derivative, SML‐10‐70‐1, which are selective, direct‐acting covalent inhibitors of the K‐Ras G12C mutant relative to wild‐type Ras. Biochemical and biophysical measurements suggest that modification of K‐Ras with SML‐8‐73‐1 renders the protein in an inactive state. These first‐in‐class covalent K‐Ras inhibitors demonstrate that irreversible targeting of the K‐Ras guanine‐nucleotide binding site is potentially a viable therapeutic strategy for inhibition of Ras signaling.