Enhanced coercivity in sponge magnets with three dimensionally ordered nanopores

Nanoporous magnets are new promising materials particularly useful in biological assays and ion separations. This letter deals with a simple method for making porous magnets composed of cobalt ferrite, where polymer colloidal spheres were used as sacrificial templates. Compared with the bulk congener the porous cobalt ferrite shows enhancements in coercive field and magnetization, which could be associated with the presence of nanopores ordered three dimensionally. Using the sponge magnet complete removal of magnetic Cu and Fe ions was achieved while partial removal was observed with porous silicate having the same size of nanopores.     

RF-sputtered CrB2 diffusion barrier for Ni/Au Ohmic contacts on p-CuCrO2

Ohmic contacts to p-type CuCrO₂ using Ni/Au/CrB₂/Ti/Au contact metallurgy are reported. The samples were annealed in the 200–700 °C range for 60 s in flowing oxygen ambient. A minimum specific contact resistance of 2 × 10⁻⁵ Ω cm² was obtained after annealing at 400 °C. Further increase in the annealing temperature (>400 °C) resulted in the degradation of contact resistance. Auger Electron Spectroscopy (AES) depth profiling showed that out-diffusion of Ti to the surface of the contact stacks was evident by 400 °C, followed by Cr at higher temperature. The CrB₂ diffusion barrier decreases the specific contact resistance by almost two orders of magnitude relative to Ni/Au alone.     

Central neurocytoma: typical magnetic resonance spectroscopy findings and atypical ventricular dissemination

PURPOSE: Central neurocytomas (CNCs) are rare neuronal tumors that have a favorable prognosis and lower rate of recurrence compared with other intraventricular neoplasms. Although it may be difficult to distinguish CNC on conventional neuroimaging, typical MR spectroscopy (MRS) features have been reported. We describe the MRI and MRS features of CNC. MATERIALS AND METHODS: Eight patients with CNC were reviewed. Three patients underwent presurgical in vivo single-voxel MRS at short echo time (TE, 35 ms) and multi-voxel MR spectroscopic imaging at long TE (144 ms). The surgically resected tumor specimen of one of these patients was also studied ex vivo using high-resolution magic angle spinning (HRMAS) nuclear magnetic resonance. RESULTS: All eight tumors were located in the lateral ventricles. In six patients, CNC extended into the third ventricle, and in two patients the tumor showed further contiguous intraventricular dissemination into the fourth ventricle. In all three patients who underwent MRS, a characteristic metabolite peak was detected at 3.55 parts per million (ppm) at both long and short TE. HRMAS confirmed the presence of elevated glycine (Gly) at 3.55 ppm, without increase in the concentration of myo-inositol found at the same chemical shift. Elevated choline (at 3.2 ppm) was also seen in all three patients. CONCLUSION: On MRS, CNCs have a typical appearance with a metabolite peak at 3.55 ppm due to increased Gly, and this feature may be helpful in presurgical diagnosis. Although they are rare benign intraventricular tumors, in atypical cases, CNCs can show extensive intraventricular dissemination into the fourth ventricle.     

Solid phase synthesis of benzamidine-derived sulfonamide libraries

Using solid phase synthesis, a library has been constructed of benzamidine-derived sulfonamides which have strong inhibitory activity against blood coagulant thrombin. The library compounds were obtained in good yield and high purity. This revised version was published online in August 2006 with corrections to the Cover Date.     

The Tolerance of All-Optical Switching Based on Cascaded Second-Order Nonlinearity in PPLN APE Waveguide

Based on solving the couple mode equation numerically, the characterization of the signal power on the gate power was analyzed. And the relationship of the tolerance of the grating period and the bulk temperature on the interaction length was analyzed.     

Room temperature diluted magnetic semiconductor synthesized by dual beam laser deposition

Diluted magnetic semiconductor Co-doped ZnO film has been synthesized by a dual beam pulsed laser deposition method. The magnetic, electrical, and optical properties of the Zn_0.985Co_0.015O_0.67 film are studied in this paper. The film shows ferromagnetic behavior with a coercivity of about 300 Oe at room temperature, and semiconductor behavior with carrier concentration of 2.2×10¹⁸ cm^-3, and a resistivity of 102 mcm. Structural investigations indicated that the film has similar lattice constants to that of ZnO. It is shown that the film exhibits excellent optical properties with a band gap energy of 3.31 eV, which is close to that of ZnO. The origins of the magnetism are also discussed. PACS 81.15.Fg; 75.50 Pp; 61.72.Vv     

Time-domain numerical computation of noise reduction by diffraction and finite impedance of barriers

A new time-domain numerical method is presented for the estimation of noise reduction by the diffraction and finite impedance of barriers. High order finite difference schemes conventionally used for computational aeroacoustics, and time-domain impedance boundary conditions are utilized for the development of the time-domain method. Compared with other methods, this method can be applied more easily to the problems related to nonlinear noise propagation such as impulsive noise and broadband noise. Linearized Euler equations in Cartesian co-ordinates are considered and solved numerically. Straight and T-shaped barriers with and without surface admittance are calculated. In order to assess the accuracy of this time-domain method, comparison with the results of SYSNOISE software (Ver. 5.3) are made. There are very good agreements between the results of the present time-domain numerical method and the boundary element method of the SYSNOISE software.     

Polymer-assisted complexing controlled orientation growth of ZnO nanorods

The growth of the oriented zinc oxide (ZnO) nanorods on silicon substrates based on a simple novel chemical transformation and thermal hydrolysis by using polyvinyl alcohol (PVA) as self-assembling complex polymer was introduced in this paper. All the polymers were removed after chemical oxidation and only the carbonized grid backbones remained that confines the ZnO nanorod’s diameter and enhance the absorption and diffusion of ZnO at the tips of the nanorods during growth. The ZnO nanorods are investigated by FTIR, XRD and FE-SEM. The results indicated that these nanorods have fine hexagonal wurtzite crystal structure and their diameter varies from 20 to 90 nm and the length up to about 1 μm. A polymer-localized ZnO growth model is proposed, which well explains the growth behavior of ZnO nanorods.This revised version was published online in August 2005 with a corrected issue number.     

类Li硼离子内壳层三重激发态2s2p2的结构和俄歇过程

采用基于全相对论框架的多组态Dirac-Fock方法,研究了类Li硼离子内壳层三重激发态2s2p2的结构和俄歇退激发过程。为了充分考虑电子关联效应,将活动空间扩展到n=8壳层。详细讨论了电子关联效应对类Li硼离子内壳层三重激发态2s2p2结构和俄歇退激发过程的影响。结果表明,在对类Li硼离子内壳层三重激发态2s2p2进行理论研究时,有必要考虑来自n=8壳层的电子关联效应。本文模拟的类Li硼离子内壳层三重激发态2s2p2的俄歇电子谱与实验符合好。     

基于非线性偏振旋转效应的多波长光纤激光器

多波长光纤激光器是未来波分复用光通信系统的理想光源,提出和展示了一个基于非线性偏振旋转效应的多波长光纤激光器,非线性偏振旋转诱导的强度相关非均匀损耗能有效地抑制均匀加宽增益介质掺铒光纤中的模式竞争,从而使光纤激光器在室温下产生稳定的多波长输出,实验实现了最多18个波长的多波长输出.另外,此激光器没有使用传统的滤波器,而是在激光腔内插入一段保偏光纤,保偏光纤与偏振相关隔离器构成一等效Lyot双折射光纤周期性滤波器.利用这种在线型的双折射光纤滤波器简化了光纤激光器的结构,使它更易于集成.还实验研究了多波长输出随抽运功率的演化,发现抽运功率对多波长的均匀性影响很大.