Cyanide-bridged W(V)-Co(II) double-zigzag chain based on an octacoordinated W precursor: metamagnetism and spin canting

A cyanide-bridged W-Co bimetallic complex (1) with a double-zigzag chain structure was characterized in terms of structure and magnetism. Compound 1 exhibits metamagnetism and spin canting induced by the presence of anisotropic CoII ions and noncovalent interactions.     

Effect of the residual silanol group protection on the liquid chromatographic resolution of racemic primary amino compounds on a chiral stationary phase based on optically active (3,3'-diphenyl-1,1'-binaphthyl)-20-crown-6

A liquid chromatographic chiral stationary phase (CSP) based on (3,3'-diphenyl-1,1'-binaphthyl)-20-crown-6, which has been utilized in the resolution of alpha-amino acids, amines and amino alcohols, was treated with excess of n-octyltriethoxysilane to prepare a new improved CSP. The residual silanol groups of the original CSP were protected by n-octyl groups in the new CSP. The chiral recognition ability of the new CSP was superior to that of the original CSP in the resolution of alpha-amino acids, amines and amino alcohols. Retention factors (k1) for the resolution of alpha-amino acids were lower on the new CSP than on the original CSP while those for the resolution of amines and amino alcohols were higher on the new CSP than on the original CSP. The improved chiral recognition ability of the new CSP and the retention behaviors of the two enantiomers on the new CSP have been rationalized to stem from the removal of the non-enantioselective interactions between the analytes and the residual silanol groups of the original CSP and the improved lipophilicity of the CSP.     

Differential interactions of plasmid DNA, RNA and endotoxin with immobilised and free metal ions

Separation of negatively charged molecules, such as plasmid DNA (pDNA), RNA and endotoxin forms a bottleneck for the development of pDNA vaccine production process. The use of affinity interactions of transition metal ions with these molecules may provide an ideal separation methodology. In this study, the binding behaviour of pDNA, RNA and endotoxin to transition metal ions, either in immobilised or free form, was investigated. Transition metal ions: Cu2+, Ni2+, Zn2+, Co2+ and Fe3+, typically employed in the immobilised metal affinity chromatography (IMAC), showed very different binding behaviour depending on the type of metal ions and their existing state, i.e. immobilised or free. In the alkaline cell lysate, pDNA showed no binding to any of the IMAC chemistries tested whereas RNA interacted significantly with Cu2+-iminodiacetic acid (IDA) and Ni2+-IDA but showed no substantial binding to the rest of the IMAC chemistries. pDNA and RNA, however, interacted to varying degrees with free metal ions in the solution. The greatest selectivity in terms of pDNA and RNA separation was achieved with Zn2+ which enabled almost full precipitation of RNA while keeping pDNA soluble. For both immobilised and free metal ions, ionic strength of solution affected the metal ion-nucleic acid interaction significantly. Endotoxin, being more flexible, was able to interact better with the immobilised metal ions than the nucleic acids and showed binding to all the IMAC chemistries. The specific interactions of immobilised and/or free metal ions with pDNA, RNA and endotoxin showed a good potential, by selectively removing RNA and endotoxin at high efficiency, to develop a simplified pDNA purification process with improved process economics.     

A facile synthesis of 1‐alkyl‐5‐arylalkoxy‐6‐methoxy‐3,4‐dihydroisoquinolines

1‐Alkyl‐5‐arylalkoxy‐6‐methoxy‐3,4‐dihydroisoquinolines were synthesized by the alkylation of 1‐alkyl‐5‐hydroxy‐6‐methoxy‐3,4‐dihydroisoquinolines with arylalkyl halide in the presence of potassium carbonate. 1‐Alkyl‐5‐hydroxy‐6‐methoxy‐3,4‐dihydroisoquinolines as key precursor prepared from o‐vaniline via 6 steps.     

Synthesis and photovoltaic properties of efficient organic dyes containing the benzo[b]furan moiety for solar cells

New organic dyes composed of the benzo[b]furan donor, thiophene-conjugated bridge, and cyano acrylic acid acceptor have been newly synthesized through the one-pot coupling cyclization key step. Nanocrystalline TiO2 dye-sensitized solar cell was fabricated using this dye. A solar-to-electric conversion efficiency of 6.65% and 4.70% is achieved with 1 and 2, respectively.     

Gold-labeled block copolymer micelles reveal gold aggregates at multiple subcellular sites

There is increasing interest in the usefulness of block copolymer micelles as drug delivery vehicles. However, their subcellular distribution has not been explored extensively, mostly because of the lack of adequately labeled block copolymers. In a previous study, we showed that fluorescently labeled block copolymer micelles entered living cells and co-localized with cytoplasmic organelles selectively labeled with fluorescent dyes. The details of the observed co-localizations were, however, limited by the resolution of the fluorescence approach, which is ca. 500 nm. Using transmission electron microscopy (TEM), we established time- and concentration-dependent subcellular distributions of gold-labeled micelles within human embryonic kidney (HEK 293) cells and human lung carcinoma (A549) cells. Gold particles were incorporated into poly(4-vinylpyridine)-block-poly(ethylene oxide) (P4VP21-b-PEO45) micelles. Data from dynamic light scattering (DLS) and TEM analyses revealed that the sizes of the gold particles ranged from 4 to 8 nm. The cells survived up to 24 h in the presence of low gold-labeled micelle concentrations (0.73 microg/mL), but cell death occurred at higher concentrations (i.e., kidney cells are more susceptible than lung cells). Over 24 h periods of equivalent exposure, lung cells internalized significantly more gold-incorporated micelles than kidney cells. Although micelles were added to the cell culture media as dispersed colloidal particles, the presence of serum in these media caused aggregation. These aggregates occurred mainly close to the cell plasma membrane at early times (5-10 min); however, at later times (24 h) aggregated particles were seen inside endosomes and lysozomes. Thus, gold-incorporated (labeled) micelles can serve as a valuable extension of the fluorescence approach to visualizing the localization of micelles in subcellular compartments, improving the resolution by at least 20-fold.     

Cell adhesion properties on photochemically functionalized diamond

The biocompatibility of diamond was investigated with a view toward correlating surface chemistry and topography with cellular adhesion and growth. The adhesion properties of normal human dermal fibroblast (NHDF) cells on microcrystalline and ultrananocrystalline diamond (UNCD) surfaces were measured using atomic force microscopy. Cell adhesion forces increased by several times on the hydrogenated diamond surfaces after UV irradiation of the surfaces in air or after functionalization with undecylenic acid. A direct correlation between initial cell adhesion forces and the subsequent cell growth was observed. Cell adhesion forces were observed to be strongest on UV-treated UNCD, and cell growth experiments showed that UNCD was intrinsically more biocompatible than microcrystalline diamond surfaces. The surface carboxylic acid groups on the functionalized diamond surface provide tethering sites for laminin to support the growth of neuron cells. Finally, using capillary injection, a surface gradient of polyethylene glycol could be assembled on top of the diamond surface for the construction of a cell gradient.     

Homocysteine-mediated reactivity and assembly of gold nanoparticles

This paper reports the findings of an investigation of the reactivity and assembly of gold nanoparticles mediated by homocysteine (Hcys), a thiol-containing amino acid found in plasma. The aim is to gain insight into the interparticle interaction and reactivity, which has potential application for the detection of thiol-containing amino acids. By monitoring the evolution of the surface plasmon resonance absorption and the dynamic light scattering of gold nanoparticles in the presence of Hcys, the assembly was shown to be dependent on the nature and concentration of the electrolytes, reflecting an effective screening of the diffuse layer around the initial citrate-capped nanoparticles that decreases the barrier to the Hcys adsorption onto the surface, and around the subsequent Hcys-capped nanoparticles that facilitate the zwitterion-type electrostatic interactions between amino acid groups of Hcys bound to different nanoparticles. A key element of the finding is that the interparticle zwitterion interaction of the Hcys-Au system is much stronger than the expectation for a simple Hcys or Au solution, a new phenomenon originating from the unique nanoscale interparticle interaction. The strength and reversibility of the interparticle zwitterion-type electrostatic interactions between amino acid groups are evidenced by the slow disassembly upon increasing pH at ambient temperatures and its acceleration at elevated temperature. These findings provide new insight into the precise control of interfacial interactions and reactivities between amino acids anchored to nanoparticles and have broad implications in the development of colorimetric nanoprobes for amino acids.     

Acetylation of beta-cyclodextrin surface-functionalized cellulose dialysis membranes with enhanced chiral separation

The enhanced enantiomeric separation of racemic phenylalanine solution has been demonstrated by the membrane-based chiral resolution method using an acetylated beta-cyclodextrin-immobilized cellulose dialysis membrane. Beta-cyclodextrin (CD) was first immobilized onto the surface of commercial cellulose dialysis membranes, followed by the acetylation reaction through the treatment of the membranes with acetic anhydride to form the chiral selective acetylated beta-cyclodextrin-immobilized cellulose dialysis membrane. The acetylated CD-immobilized membrane exhibits enantioselectivity in the range of 1.26-1.33 depending on the acetylation time. The improvement in enantioselectivity after acetylation was mainly attributed to the better discrimination ability of acetylated CD and the decrease in membrane pore size. Molecular modeling simulations indicate that the acetylation of hydroxyl groups would result in a CD conformation with torus distortions and would create higher steric hindrance for penetrants. As a result, compared to the original CD, the acetylated CD may have less effective binding but better discrimination of enantiomers. The energy drop is only 3 kcal/mol between different enantiomers before and after the binding of phenylalanine with an unmodified CD. The energy drop increases to 10 kcal/mol if acetylated CD is employed as the chiral selector, showing stronger characteristics for chiral selection.     

Electrocatalytic oxidation of formic acid and methanol on Pt deposits on Au(111)

This work presents characteristics of Pt deposits on Au(111) obtained by the use of spontaneous deposition and investigated by electrochemical scanning tunneling microscopy (EC-STM). On such prepared and STM characterized Au(111)/Pt surfaces, we studied electrocatalytic oxidation of formic acid and methanol. We show that the first monatomic layer of Pt displays a (square root 3 x square root 3)R30 degrees surface structure, while the second layer is (1 x 1). After prolonged deposition, multilayer Pt deposits are formed selectively on Au(111) surface steps and are 1-20 nm wide and one to five layers thick. On the optimized Au(111)/Pt surface, formic acid oxidation rates are enhanced by a factor of 20 compared to those of pure Pt(111). The (square root 3 x square root 3)R30 degrees-Pt yields very low methanol oxidation rates, but the rates increase significantly with further Pt growth.