Photochemical reactions of a dimethacrylate compound containing a chalcone moiety in the main chain

We synthesized the new photosensitive oligomer containing a chalcone moiety in the main chain by end-capping reaction of diepoxide compound with methacrylic acid. The chalcone-epoxy oligomeric compound was synthesized with 4,4^′-dihydroxychalcone and epichlorohydrin. Investigation of the photosensitivity of the newly synthesized chalcone oligomer was carried out by using UV-Vis absorption and infrared spectroscopies under UV exposure. We observed the photodimerization behavior under UV irradiation. At the same time, we could also observe the photopolymerization of the compound with a trace amount of dimethoxyphenyl acetophenone. Thermal properties of UV-cured dimethacrylate compounds were also studied.     

Effect of photothermal therapy on breast tumor vascular contents: noninvasive monitoring by near-infrared spectroscopy

The goal of this study was to investigate the effect of photothermal laser irradiation on rat breast tumor (DMBA-4) vascular contents. An 805-nm diode laser was used in our experiment with a power density ranging from 0.32 to 1.27 W/cm2. The dynamic changes of oxygenated hemoglobin and total hemoglobin concentrations, delta[HbO2] and delta[Hb]total, in rat tumors during photothermal irradiation were noninvasively monitored by a near-infrared spectroscopy system. A multichannel thermal detection system was also used simultaneously to record temperatures at different locations within the tumors. Our experimental results showed that: (1) photoirradiation did have the ability to induce hyperthermic effects inside the rat breast tumors in a single exponential trend; (2) the significant changes (P < 0.005) of delta[HbO2] and delta[Hb]total in response to a low dosage of laser irradiation (0.32 W/cm2) have a single exponential increasing trend, similar to that seen in the tumor interior temperature; and (3) the increase in magnitude of delta[HbO2] is nearly two times greater than that of delta[Hb]total, suggesting that photoirradiation may enhance tumor vascular oxygenation. The last observation may be important to reveal the hidden mechanism of photoirradiation on tumors, leading to improvement of tumor treatment efficiency.     

Formation mechanism of conducting polypyrrole nanotubes in reverse micelle systems

Polypyrrole (PPy) nanotubes were readily fabricated through chemical oxidation polymerization in sodium bis(2-ethylhexyl) sulfosuccinate (AOT) reverse (water-in-oil) emulsions. The reverse cylindrical micelle phase was characterized, and the key factors affecting the formation of PPy nanotubes were systematically inspected. AOT reverse cylindrical micelles were prepared via a cooperative interaction between an aqueous FeCl3 solution and AOT in an apolar solvent. In the H2O/FeCl3/AOT/apolar solvent system, the aqueous FeCl3 solution played a role in increasing the ionic strength and decreasing the second critical micelle concentration of AOT. As a result, AOT reverse cylindrical micelles could be spontaneously formed in an apolar solvent. In addition, iron cations were adsorbed to the anionic AOT headgroups that were capable of extracting metal cations from the aqueous core. Under these conditions, the addition of pyrrole monomer resulted in the chemical oxidation polymerization of the corresponding monomer at the surface of AOT reverse cylindrical micelles, followed by the formation of tubular PPy nanostructures. In a typical composition (74.0 wt % hexane, 22.4 wt % AOT, and 3.6 wt % aqueous FeCl3 solution at 15 degrees C), the average diameter of PPy nanotubes was approximately 94 nm and their length was more than 2 mum. The PPy nanotube dimensions were affected by synthetic variables such as the weight ratio of aqueous FeCl3 solution/AOT, type of apolar solvent, and reaction temperature. Moreover, the relationship between the diameter and the conductivity of the nanotubes was investigated.     

Morphology, crystallization behavior and properties of impact-modified polypropylene copolymer with or without sodium benzoate as a nucleating agent

 The morphology, crystallization behavior, and properties of an impact-modified polypropylene (PP) copolymer with or without sodium benzoate were investigated. The contents of ethylene–propylene rubber (EPR) in the reactor-made PP copolymer is about 15 wt%. For comparison, blends of PP and EPR containing the same EPR composition were prepared by melt-mixing. Morphological studies by scanning probe microscopy indicated that the impact-modified copolymer consists of three different phases, i.e., polyethylene, PP, and EPR phases, which is considerably different from the morphology of the conventional PP/EPR blend of the corresponding composition. The impact-modified PP copolymer exhibited a higher crystallization rate in terms of the lower crystallization half-time and thus higher thermal and mechanical properties, such as impact strength and hardness, than the PP/EPR blend did. The addition of sodium benzoate as a nucleating agent to the copolymer increased the crystallization rate and the mechanical properties. Received: 4 June 2001 Accepted: 31 October 2001     

2,3,7‐Triazabicyclo[3.3.0]octenes Prepared by Tandem Cascade Reaction of Allyl Azides and Olefinic Dipolarophiles

Tandem cascade reactions of allylazides and olefinic dipolarophiles to give cis‐fused 2,3,7‐triazabicyclo [3.3.0]octenes ( 5, 6 or 7 ) are reported. Therein, an intermolecular dipolar cycloaddition of azide and alkene gave a triazoline which was followed by isomerization of the triazoline to a diazoester ( 4 ) and then an intramolecular dipolar cycloaddition from the diazo functional group and the double bond in 4 to give 5 . Compound 5 may further more undergo a Michael addition to give 7‐substituted‐ 2,3,7‐ triazabicyclo [3.3.0]oct‐2‐ene ( 6 ) or a tautomerization to give 2,3,7‐triazabicyclo[3.3.0]oct‐3‐ene ( 7 ). The reaction may be manipulated to stop at a particular stage by adopting a suit able solvent or an appropriate temperature.     

Scope and mechanistic study of the ruthenium-catalyzed ortho-C-H bond activation and cyclization reactions of arylamines with terminal alkynes

The cationic ruthenium hydride complex [(PCy(3))(2)(CO)(CH(3)CN)(2)RuH](+)BF(4)(-) was found to be a highly effective catalyst for the C-H bond activation reaction of arylamines and terminal alkynes. The regioselective catalytic synthesis of substituted quinoline and quinoxaline derivatives was achieved from the ortho-C-H bond activation reaction of arylamines and terminal alkynes by using the catalyst Ru(3)(CO)(12)/HBF(4).OEt(2). The normal isotope effect (k(CH)/k(CD) = 2.5) was observed for the reaction of C(6)H(5)NH(2) and C(6)D(5)NH(2) with propyne. A highly negative Hammett value (rho = -4.4) was obtained from the correlation of the relative rates from a series of meta-substituted anilines, m-XC(6)H(4)NH(2), with sigma(p) in the presence of Ru(3)(CO)(12)/HBF(4).OEt(2) (3 mol % Ru, 1:3 molar ratio). The deuterium labeling studies from the reactions of both indoline and acyclic arylamines with DCCPh showed that the alkyne C-H bond activation step is reversible. The crossover experiment from the reaction of 1-(2-amino-1-phenyl)pyrrole with DCCPh and HCCC(6)H(4)-p-OMe led to preferential deuterium incorporation to the phenyl-substituted quinoline product. A mechanism involving rate-determining ortho-C-H bond activation and intramolecular C-N bond formation steps via an unsaturated cationic ruthenium acetylide complex has been proposed.     

Substituent control of hydrogen bonding in palladium(II)-pyrazole complexes

Inter- and intramolecular hydrogen bonding of an N-H group in pyrazole complexes was studied using ligands with two different groups at pyrazole C-3 and C-5. At C-5, groups such as methyl, i-propyl, phenyl, or tert-butyl were present. At C-3, side chains L-CH(2)- and L-CH(2)CH(2)- (L = thioether or phosphine) ensured formation of chelates to a cis-dichloropalladium(II) fragment through side-chain atom L and the pyrazole nitrogen closest to the side chain. The significance of the ligands is that by placing a ligating side chain on a ring carbon (C-3), rather than on a ring nitrogen, the ring nitrogen not bound to the metal and its attached proton are available for hydrogen bonding. As desired, seven chelate complexes examined by X-ray diffraction all showed intramolecular hydrogen bonding between the pyrazole N-H and a chloride ligand in the cis position. In addition, however, intermolecular hydrogen bonding could be controlled by the substituent at C-5: complexes with either a methyl at C-5 or no substituent there showed significant intermolecular hydrogen bonding interactions, which were completely avoided by placing a tert-butyl group at C-5. The acidity of two complexes in acetonitrile solutions was estimated to be closer to that of pyridinium ion than those of imidazolium or triethylammonium ions.     

PHOTOREACTION OF 8-METHOXYPSORALEN WITH THYMIDINE

Abstract— The photoreaction of 8-methoxypsoralen (8-MOP) with thymidine in solid film state yielded two 4', 5'-monoadducts (a pair of diastereomers) and three 3,4-monoadducts. The stereochemistry of two 4', 5'-monoadducts was found to be cis-syn and trans-syn and one 3,4-monoadduct was cis-anti. In addition to these monoadducts, 3,4-, 4', 5'-biadducts were also formed during the reaction, but the isolation of each isomer of these adducts was not successful; however, the formation of these biadducts was confirmed by UV, IR, TLC and photosplitting experiments.     

Lyotropic effect in surface charge,electrokinetics, and coagulation of a rutile dispersion

Potentiometric, electrokinetic, and coagulation experiments with a rutile dispersion in the pH region above the point of zero charge exhibit an inverse lyotropic sequence for counterions: Li⁺>K⁺>Cs⁺. The potentiometric and electrokinetic data were interpreted by a surface complexation model assuming the Stern-Gouy-Chapman structure of the interfacial layer, which yielded the values of inner layer capacitances,C, and the intrinsic equilibrium constants,K _ass ⁰ , characterizing the specificity of each counterion. These parameters were used to explain the order of lyotropic sequences in the adsorption, coagulation, and electrokinetic phenomena.