Prediction of the conditions for breathing of metal organic framework materials using a combination of X-ray powder diffraction, microcalorimetry, and molecular simulation

The adsorption of C1 to C4 linear hydrocarbons in the flexible metal organic framework MIL-53(Cr) has been followed by adsorption manometry coupled with microcalorimetry and Synchrotron X-ray powder diffraction. This experimental investigation was completed by molecular modeling. In the case of methane, the solid remains rigid whatever the adsorbate amount. However for the C2-C4 series, an increasing flexibility of the structure is observed, which is ascribed first to a breathing of the material from a large pore to a narrow pore form followed by a further expansion at high pressure. The collected thermodynamic and structural information suggests that a minimum adsorption enthalpy of ca. 20 kJ mol (-1) in the initial large pore structure of MIL-53(Cr) is required to induce the structural transition "large to narrow pore". Further, the enthalpy of adsorption can be used to predict the pressure at which the structure reopens. Finally, the magnitude of the breathing can be related to the size of the probe molecule via the van der Waals volume. The above trends have been successfully verified in the case of water and carbon dioxide. This combined experimental and theoretical approach gives the first elements for the prediction of whether or not the MIL53 and similar flexible structures will respond to gas loading and what would be the pressure required and further the amplitude of the induced breathing.     

Modulating the framework negative charge density in the system [BDT-TTP*+]/[Re6S5Cl9(1-)]/[Re6(S/Se)6Cl8(2-)]/[Re6S7Cl7(3-)]: templating by isosteric cluster anions of identical symmetry and shape, variations of incommensurate band filling, and electronic structure in 2D metals

A series of 2D metals, beta-(BDT-TTP)6[Re6Se6Cl8] x (CHCl2-CHCl2)2, 2; beta-(ST-TTP)6[Re6S6Cl8] x (CH2Cl-CHCl2)2, 3; beta-(BDT-TTP)7[Re6S6Cl8]0.5[Re6S7Cl7]0.5 x (CH2Cl2), 4; beta-(BDT-TTP)7[Re6Se6Cl8]0.5[Re6S7Cl7]0.5 x (CH2Cl2), 5; beta-(BDT-TTP)8[Re6S7Cl7] x (CH2Cl2)4, 6 (BDT-TTP and ST-TTP are 2,5-bis(1,3-dithiol-2-ylidene)-1,3,4,6-tetrathiapentalene and 2-(1,3-diselenol-2-ylidene)-5(1,3-dithiol-2-ylidene)-1,3,4,6-tetrathiapentalene, respectively) is reported to have one single beta-slab layered topology despite successive increases of the cluster anion negative charge. The charge density within the templating composite inorganic-neutral molecule slab is shown to remain above a threshold of ca. one negative charge per square nanometer, that is, for cluster anions with two negative charges and higher. Conversely, discrete stacks are shown to be stabilized instead in the semiconducting salts (BDT-TTP)2[Re6S5Cl9], 1 where the cluster anion bears one negative charge only. The electronic structure of salts 2-6 is shown to be very stable and kept almost intact across the series. The templating strategy is shown to fulfill its anticipated potential for deliberate installment of incommensurate band fillings in molecular metals. The deliberate admixture of the 6:1 and 8:1 structures yields novel phases with a 7:1 stoichiometry with the anticipated crystal and electronic structures. The action at the organic-inorganic interface triggered by changing the anion charge yet keeping its shape and volume identical, which ultimately governs the shape of the unit cell, is of paramount importance in defining the Fermi surface of these metallic salts. The present BDT-TTP salts thus provide a series of materials with strongly related but subtly different Fermi surfaces worthy of many physical studies. Shubnikov-de Haas measurements are expected to be particularly interesting since they are especially sensitive to the details of the Fermi surface.     

Stereo- and Regiochemical Effect of N,N-Dialkylamide Extractants on the Speciation of Pu Complexes

The relationship between extractant stereochemistry and their extraction performance has only poorly been established. In order to address a part of this concern, we investigated the Pu(IV) liquid-liquid extraction (LLE) by using the N,N-di-(2-ethylhexyl)butyramide (DEHBA), as well as those of its position isomers. DEHBA (ββ-isomer) and N-(2-ethylhexyl)-N-(oct-3-yl)butyramide (EHOBA or αβ-isomer) were synthesized as a mixture of stereoisomer or stereoenriched (R,S)- and (S,S)-diastereoisomers, and were all assessed for Pu^IV LLE. The results showed that both the position and the stereoisomerism of the aliphatic substituents affect Pu^IV complexation and extraction. We found that Pu extraction is lowered by factor 2 to 4 when the ethyl branching group is closer to the complexing site. UV-vis spectroscopy showed that this extraction decrease was affected by steric hindrance inducing a deprivation of Pu inner sphere complex. Effect of stereoisomerism is highlighted for branching closer to the complexing site (α-position). Enantiopure DEHBA stereoisomers provided similar Pu extraction, whereas a slight decrease could be noticed for the more cluttered stereoenriched (αβ)-isomers, which was also concomitant with a smaller population of inner sphere complex. In contrast, the stereoisomers mixture led to a strong decrease of Pu extraction because of an antagonistic association in the mixed complexes.     

High-throughput simultaneous detection of point mutations and large-scale rearrangements by CE

The detection of unknown mutations is important both in population genetics research and in diagnosis. At present, two different methods must be used to detect either point mutations or large-scale genetic rearrangements, which is costly and time-consuming. We describe here a new method for the simultaneous detection of these two types of mutations. It is based on electrophoretic heteroduplex analysis (HDA) using enhanced mismatch mutation analysis (EMMA) and semiquantitative multiplexed PCR conditions. The use of such conditions allows the simultaneous search of any kind of mutation in up to five different fragments per capillary, in a single or multi-CE system. The method was validated on patient samples with mutations in the breast predisposition gene BRCA1. It leads to highly reliable and high-throughput mutation detection at low cost, as compared with classical methods.     

Rheological characterisation of bis-urea based viscoelastic solutions in an apolar solvent

The rheological properties of hydrogen bonded reversible aggregates in apolar solvent have been investigated. The zero shear viscosity, the plateau modulus and the terminal viscoelastic relaxation time exhibit power laws dependencies with the concentration that have been compared with the behaviours expected for reversible polymers. It appears that the dynamics originate from scission/recombination mechanisms. Moreover, the growth of the aggregates with concentration follows the laws observed and predicted for worm-like micelles at low concentrations allowing the length of the aggregates to be estimated 500 nm at 3 g L(-1). However, at the highest concentrations investigated, deviations from the power laws suggest the presence of some intrinsic chain stopper poisons in the solutions.     

Interactions between poloxamers in aqueous solutions: micellization and gelation studied by differential scanning calorimetry, small angle X-ray scattering, and rheology

Poloxamers F88 (EO97PO39EO97) and P85 (EO27PO39EO27) are triblock copolymers of ethylene oxide (EO) and propylene oxide (PO), which have the same hydrophobic PO block. We studied aqueous solutions of these two copolymers by the conjoint use of differential scanning calorimetry (DSC), rheology, and small-angle X-ray scattering (SAXS). The results showed that the temperature-induced micellization of aqueous solutions of F88 and P85 was a progressive process followed by gelation for sufficiently concentrated samples. Gelation was due to the ordered packing of micelles under a hexagonal compact (HC) structure for P85 and a body-centered cubic (BCC) phase for F88. Importantly, the phase diagram of F88/P85 mixtures in water was elucidated and showed the destabilization of the HC phase upon addition of small amounts of F88.     

Functional and site-specific macromolecular micelles as high potential drug carriers

Since several years, macromolecular micelles based on amphiphilic block copolymers have attracted much interest as drug carriers. These micelles show a long term blood circulation time resulting from their small diameter and the steric repulsion created by the poly(ethylene oxide) chains which constitute micelle corona, as well as from their high thermodynamic stability. Besides this long term blood circulation time generating a passive targeting, an active targeting, chemical or physical affinity targeting, might allow the preparation of more efficient drug carriers. In order to obtain such double targeting properties, we have prepared two kinds of macromolecular micelles. The first one is based on amphiphilic poly(ethylene oxide)/poly(β-benzyl -aspartate) ---PEO/PBLA--- block copolymers having hydroxy groups at the free end of PEO chains. As a result of their structure, such micelles have hydroxy groups on their outer-shell which can be further modified in order to introduce a targeting moiety (sugar, etc.). The characteristics (diameter, critical micellar concentration (cmc), drug loading capacity) have been determined. Moreover, doxorubicin loaded -hydroxy PEO/PBLA micelles have been shown to be slightly more cytotoxic than the corresponding -methoxy PEO/PBLA micelles. The second type of micelles is based on thermosensitive amphiphilic poly(N-isopropyl acrylamide)/polystyrene ---PIPAAm/PSt--- block copolymers. Such micelles have a small diameter and a low cmc in addition to thermosensitivity properties which are similar to those of PIPAAm.     

New pH sensitive network: Combination of an amphiphilic degradable polyester with a β-cyclodextrin copolymer

A novel hydrophobic monomer, ethyladamantyl malolactonate, has been synthesized and copolymerized with benzyl malolactonate by anionic ring-opening polymerization. The ratio of adamantyl monomer varied from 0 to 100 mol%. Deprotection of benzyl groups leads to a water soluble copolyester with carboxylic acid lateral functions which give a polyelectrolyte character to the corresponding polymers. The mixture of a copolyester containing 10% of adamantyl groups and a β-cyclodextrin/epichlorohydrin copolymer in aqueous solution leads to a new pH-dependant associating system. The solution behavior of this system was studied by viscosimetry as a function of pH, concentration and ratio of both copolymers. At the initial solution pH (pH=2), the copolyester adopts a coiled structure as a result of hydrophobic interactions between the pendant adamantyl groups. Consequently, no network formation is observed as shown by a very low viscosity. As the pH increase, the viscosity of the medium increases and reaches a maximum at pH=5. At this pH, the copolyester expands because of electrostatic repulsions between the carboxylate pendant functions. Consequently, the adamantyl groups are accessible and can be encapsulated into the β-cyclodextrin cavities resulting in a significant increase of the viscosity.