Microemulsion electrokinetic chromatography: an application for the simultaneous determination of suspected fragrance allergens in rinse-off products

The feasibility of microwave-accelerated derivatization for capillary electrophoresis (CE) with laser-induced fluorescence (LIF) detection was evaluated. The derivatization reaction was performed in a domestic microwave oven. Histidine (His), 1-methylhistidine (1-MH) and 3-methylhistidine (3-MH) were selected as test analytes and fluorescein isothiocyanate (FITC) was chosen as a fluorescent derivatizing reagent. Parameters that may affect the derivatization reaction and/or subsequent CE separation were systematically investigated. Under optimized conditions, the microwave-accelerated derivatization reaction was successfully completed within 150 s, compared to 4-24 h in a conventional water-bath derivatization process. This will remarkably reduce the overall analysis time and increase sample throughput of CE-LIF. The detection limits of this method were found to be 0.023 ng/mL for His, 0.023 ng/mL for 1-MH, and 0.034 ng/mL for 3-MH, respectively, comparable to those obtained using traditional derivatization protocols. The proposed method was characterized in terms of precision, linearity, accuracy and successfully applied for rapid and sensitive determination of these analytes in human urine.     

Rapid access to structured triacylglycerols acylated with n-3 polyunsaturated fatty acids for nutritional applications

In order to better understand the metabolic fate of n-3 polyunsaturated fatty acids (PUFAs), an efficient access to symmetrical and unsymmetrical triacylglycerols (TGs), esterified with PUFAs, with known high purity, is required. In this context, we optimized the esterification of a mixture of glycerols protected as dioxane and dioxolane with PUFAs. The kinetics of this reaction depends on various factors, such as the fatty acid chain length and the stereochemistry of the dioxane. Then, one-pot acetal hydrolysis and esterification of hydroxyl groups led to the desired structured TGs without either double bond isomerization or acyl migration (except when symmetrical TGs are acylated with long-chain saturated fatty acids in external positions). PUFAs location on the glycerol backbone was assayed by NMR, HPLC and pancreatic lipase hydrolysis.     

DNA Encapsulation of Ten Silver Atoms Produces a Bright, Modulatable, Near Infrared-Emitting Cluster

Photostability, inherent fluorescence brightness, and optical modulation of fluorescence are key attributes distinguishing silver nanoclusters as fluorophores. DNA plays a central role both by protecting the clusters in aqueous environments and by directing their formation. Herein, we characterize a new near infrared-emitting cluster with excitation and emission maxima at 750 and 810 nm, respectively that is stabilized within C(3)AC(3)AC(3)TC(3)A. Following chromatographic resolution of the near infrared species, a stoichiometry of 10 Ag/oligonucleotide was determined. Combined with excellent photostability, the cluster's 30% fluorescence quantum yield and 180,000 M(-1)cm(-1) extinction coefficient give it a fluorescence brightness that significantly improves on that of the organic dye Cy7. Fluorescence correlation analysis shows an optically accessible dark state that can be directly depopulated with longer wavelength co-illumination. The coupled increase in total fluorescence demonstrates that enhanced sensitivity can be realized through Synchronously Amplified Fluorescence Image Recovery (SAFIRe), which further differentiates this new fluorophore.     

Survey of chemical residues and biological evaluation of photochemically pre-vulcanized surgical gloves

Abstract  

Latex allergies arise from the presence of latex proteins as well as noxious rubber additives (mainly accelerators and activators used in conventional sulfur-accelerated vulcanization processes) in medical devices (e.g., medical gloves, catheters) made from natural rubber latex. As a new approach the ultraviolet (UV) light-initiated pre-vulcanization of natural rubber latex makes efficient cross-linking feasible without using any toxic, mutagenic, or irritating chemicals. The cross-linking in the latex particles is accomplished via the thiol-ene addition reaction in the presence of a polyfunctional thiol and a photoinitiator. The new process is carried out in a falling film photoreactor on a pilot scale which provides a continuous irradiation of the latex emulsion. The UV technique is suitable for an easy up-scaling and represents the entrance into large-volume industrial production. The surgical gloves are then made by a conventional coagulant dipping process comprising good physical properties and high ageing stabilities. The aim of this study was to evaluate the biological properties and skin compatibility of UV-pre-cured gloves in skin sensitization, skin irritation studies, and cytotoxic tests. In addition the biologically available chemical residues in the gloves were characterized by UV–visible spectroscopy, elementary analyses, and high-performance liquid chromatography coupled with mass spectroscopy. The results of the studies revealed that UV-cross-linked surgical gloves exhibit good skin compatibility together with low cytotoxicity and residual chemical levels in the range of 60 and 120 μg/g_glove.     

Direct Time‐Domain Observation of Conformational Relaxation in Gas‐Phase Cold Collisions

Cooling molecules in the gas phase is important for precision spectroscopy, cold molecule physics, and physical chemistry. Measurements of conformational relaxation cross sections shed important light on potential energy surfaces and energy flow within a molecule. However, gas‐phase conformational cooling has not been previously observed directly. In this work, we directly observe conformational dynamics of 1,2‐propanediol in cold (6 K) collisions with atomic helium using microwave spectroscopy and buffer‐gas cooling. Precise knowledge and control of the collisional environment in the buffer‐gas allows us to measure the absolute collision cross‐section for conformational relaxation. Several conformers of 1,2‐propanediol are investigated and found to have relaxation cross‐sections with He ranging from σ=4.7(3.0)×10^?18 cm² to σ>5×10^?16 cm². Our method is applicable to a broad class of molecules and could be used to provide information about the potential energy surfaces of previously uninvestigated molecules.     

Simple HPLC‐UV for the quantification of a new leishmanicidal candidate (E)‐1‐4(trifluoromethyl) benzylidene)‐5‐(2‐4‐dichlorozoyl) carbonylhydrazine (LASSBio‐1736) in rat plasma for pharmacokinetics assessment

In this study, a sensitive HPLC‐UV assay was developed and validated for the determination of LASSBio‐1736 in rat plasma with sodium diclofenac as internal standard (IS). Liquid–liquid extraction using acetonitrile was employed to extract LASSBio‐1736 and IS from 100 μL of plasma previously basified with NaOH 0.1 M. Chromatographic separation was carried on Waters Spherisorb^®S5 ODS2 C₁₈ column (150 × 4.6 mm, 5 μm) using an isocratic mobile phase composed by water with triethylamine 0.3% (pH 4), methanol and acetonitrile grade (45:15:40, v/v/v) at a flow rate of 1 mL/min. Both LASSBio‐1736 and IS were eluted at 4.2 and 5 min, respectively, with a total run time of 8 min only. The lower limit of quantification was 0.2 μg/mL and linearity between 0.2 and 4 μg/mL was obtained, with an R² > 0.99. The accuracy of the method was >90.5%. The relative standard deviations intra and interday were <6.19 and <7.83%, respectively. The method showed the sensitivity, linearity, precision, accuracy and selectivity required to quantify LASSBio‐1736 in preclinical pharmacokinetic studies according to the criteria established by the US Food and Drug Administration and European Medicines Agency. Copyright © 2016 John Wiley & Sons, Ltd.     

Unraveling σ and π Effects on Magnetic Anisotropy in cis‐NiA4B2 Complexes: Magnetization,HF‐HFEPR Studies,First‐Principles Calculations,and Orbital Modeling

By using complementary experimental techniques and first‐principles theoretical calculations, magnetic anisotropy in a series of five hexacoordinated nickel(II) complexes possessing a symmetry close to C_2v, has been investigated. Four complexes have the general formula [Ni(bpy)X₂]ⁿ⁺ (bpy=2,2′‐bipyridine; X₂=bpy ( 1 ), (NCS^?)₂ ( 2 ), C₂O₄^2? ( 3 ), NO₃^? ( 4 )). In the fifth complex, [Ni(HIM₂‐py)₂(NO₃)]⁺ ( 5 ; HIM₂‐py=2‐(2‐pyridyl)‐4,4,5,5‐tetramethyl‐4,5‐dihydro‐1H‐imidazolyl‐1‐hydroxy), which was reported previously, the two bpy bidentate ligands were replaced by HIM₂‐py. Analysis of the high‐field, high‐frequency electronic paramagnetic resonance (HF‐HFEPR) spectra and magnetization data leads to the determination of the spin Hamiltonian parameters. The D parameter, corresponding to the axial magnetic anisotropy, was negative (Ising type) for the five compounds and ranged from ?1 to ?10 cm^?1. First‐principles SO‐CASPT2 calculations have been performed to estimate these parameters and rationalize the experimental values. From calculations, the easy axis of magnetization is in two different directions for complexes 2 and 3 , on one hand, and 4 and 5 , on the other hand. A new method is proposed to calculate the g tensor for systems with S=1. The spin Hamiltonian parameters (D (axial), E (rhombic), and g_i) are rationalized in terms of ordering of the 3 d orbitals. According to this orbital model, it can be shown that 1) the large magnetic anisotropy of 4 and 5 arises from splitting of the e_g‐like orbitals and is due to the difference in the σ‐donor strength of NO₃^? and bpy or HIM₂‐py, whereas the difference in anisotropy between the two compounds is due to splitting of the t_2g‐like orbitals; and 2) the anisotropy of complexes 1 – 3 arises from the small splitting of the t_2g‐like orbitals. The direction of the anisotropy axis can be rationalized by the proposed orbital model.