Development and validation of a sensitive LC-MS/MS method with electrospray ionization using multiple ions for quantitation of torcetrapib in hamster and dog plasma

A highly sensitive and specific LC-MS/MS method has been developed and validated for the estimation of torcetrapib (TTB) with 100 microL hamster/dog plasma using DRL-16126 as an internal standard (IS). The API-4000 Q Trap LC-MS/MS was operated under multiple-reaction monitoring mode using the electrospray ionization technique. The assay procedure involved extraction of TTB and IS from plasma with acetonitrile, which yielded consistent recoveries of 65.73 and 94.01% for TTB and 79.68 and 90.70% for IS in hamster and dog plasma, respectively. The total chromatographic run time was 3.0 min and the elution of TTB and IS occurred at approximately 2.25 and 2.20 min, respectively. The resolution of peaks was achieved with 0.01 m ammonium acetate:acetonitrile (15:85, v/v) at a flow rate of 0.40 mL/min on an Inertsil ODS-3 column. The method was proved to be accurate and precise at linearity range of 1.00-200 ng/mL with a correlation coefficient (r) of > or = 0.993. The method was rugged with 1.00 ng/mL as the lower limit of quantitation. TTB was stable in the battery of stability studies. The application of the assay to preclinical pharmacokinetic studies confirmed the utility of the assay to derive hamster/dog pharmacokinetic parameters.     

Enantiospecific total synthesis of lairdinol A

The synthesis of lairdinol A, a component of the host-selective phytotoxin depsilairdin, was achieved in 12 steps (18% overall yield) without the use of protecting groups starting with the Diels-Alder reaction of (R)-carvone with 3-trimethylsilyloxy-1,3-pentadiene. The key step established the trans ring fusion by preferential epoxidation of a trans-fused enone in an equilibrating mixture of the cis-fused and trans-fused diastereomers (i.e., equivalent to a dynamic kinetic resolution of these isomers). The synthesis confirms the absolute configurations of lairdinol A and its enantiomer, cyperusol C.     

Gram level synthesis of lead-free solder in the nanometer length scale obtained from tin and silver compounds using silicone oil

A straightforward route to gram level synthesis of a pure phase of the Sn-Ag nanoalloy in an eutectic composition (Sn/Ag 96.5:3.5) in silicone oil is reported. The composition, morphology, and microstructure of the alloy were fully characterized. In a mixture of ethylene glycol and silicone oil, direct reduction of Sn(II) acetate and Ag(I) nitrate gave the Sn-Ag nanoalloy. The nanoalloy disintegrates by sonication and reforms by heating, leading to smaller particles with a melting point as low as 128 degrees C.     

Surface Plasmon Resonance (SPR) Based Optimization of Biosynthesis of Silver Nanoparticles from Rhizome Extract of <Emphasis Type="Italic">Curculigo orchioides</Emphasis> Gaertn. and Its Antioxidant Potential

The present study for the first time explores the use of Central composite design (CCD) of RSM to optimize the process parameters of biosynthesis of AgNPs from rhizome extract of Curculigo orchioides based on the absorbance of surface plasmon resonance (SPR) band at 430 nm that corresponds to the synthesis of mono-disperse, spherical AgNPs. A polynomial model was established as a functional relationship between the synthesis of AgNPs and four independent variables such as concentration of AgNO₃, % rhizome extract, pH and temperature. The optimum conditions for maximum AgNPs synthesis were 2 mM concentration of AgNO₃, 20 % rhizome extract, pH 8, and temperature of 60 °C. A significant correlation (R ² = 0.8947) was observed between the experimental data and the predicted values indicating the adequacy of the model. Transmission electron microscopy (TEM) revealed spherical particles with size range of 5–28 nm. Selected area electron diffraction pattern and X-ray diffraction analysis confirmed the face-centered cubic structure of metallic silver. The plausible mechanism for the reduction of AgNO₃ to AgNPs was proposed following the identification of functional groups by FTIR. The antioxidative activity of AgNPs was demonstrated with scavenging of hydrogen peroxide (H₂O₂), 1,1-Diphenyl-2-picrylhydrazyl (DPPH) and superoxide radicals.     

Inclusion properties of 3-fluoromesotetraphenylporphyrin with C60 and C70

To improve the selectivity ratio of C70 over C60, a new designer molecule, viz., 3-fluoromesotetraphenylporphyrin (1) has been reported in the present investigations. Fluorescence studies reveal that the Q-absorption band of 1 gets sufficient quenching effect upon addition of both C60 and C70. Binding constants (K) of the C60/1 and C70/1 complexes are estimated to be 580 and 10,800 dm3 mol(-1), respectively. Thus, K(C70)/K(C60) is approximately 19 which is very large and even comparable with other macrocyclic host molecules like calix[5]arene, azacalix[m]arene[n]pyridine, cyclotriveratrylenophane and calixarene bisporphyrin. 1H NMR chemical shift measurements show that the -NH- proton of 1 suffers more shifts in presence of C70 compared to C60. This finding also offers a good support in favor of high K value for C70/1 complex as well as large selectivity ratio of C70 over C60.     

Structure, dynamics, and the free energy of solute adsorption at liquid-vapor interfaces of simple dipolar systems: molecular dynamics results for pure and mixed Stockmayer fluids

We have performed molecular dynamics simulation studies of the structural, thermodynamic, and dynamical properties of liquid-vapor interfaces of pure and binary Stockmayer fluids of different polarity. The density profiles, the width of the liquid-vapor interface, and the orientational structure of the interfaces are calculated to characterize the structural aspects of the interfaces. Among the thermodynamic properties, we have computed the surface tension and also the free energy of transfer of a charged solute across the liquid-vapor interface for both pure and mixed fluids. Among the dynamical properties of the interfaces, we have calculated the time dependence of the velocity and angular velocity autocorrelation functions, continuous and intermittent survival probabilities, mean square displacements, diffusion coefficients, and also the dipole correlation functions and orientational relaxation times of interfacial solvent molecules. It is found that the width of the interfaces decreases with increase of concentration of the more polar component. The dipole vectors of the interfacial molecules tend to align parallel to the surfaces and this alignment is enhanced with increasing dipole moment of the fluid molecules. Also, the surface tension shows an increasing trend with increase of dipole moment of the molecules. The dynamical properties of the interfaces are found to be different from those of the corresponding bulk liquid phases. In general, the molecules at the interfaces are found to rotate and translate in the parallel direction at a somewhat faster rate than the bulk molecules. Also, on increase of concentration of the more polar component, the diffusion and orientational relaxation of interfacial molecules are found to show a weaker slowing down than those of the bulk molecules, which can be attributed to the preferential presence of the more polar component in the bulk liquid regions. The temporal behavior of the interfacial survival probabilities reveals a decrease of the survival times with increasing polarity, which can be attributed to a corresponding decrease in the interfacial thickness. Results are presented for both continuous and intermittent survival times and the origins of their differences are discussed. The free energy calculations reveal no minimum at the interfaces for adsorption of a charged solute, which shows that the ions would prefer to stay in the interior of the liquid phases, rather than at interfaces, for these model dipolar systems.     

Restriction theorems for homogeneous bundles

We prove that for an irreducible representation , the associated homogeneous -vector bundle Wτ is strongly semistable when restricted to any smooth quadric or to any smooth cubic in , where k is an algebraically closed field of characteristic ≠2,3 respectively. In particular Wτ is semistable when restricted to general hypersurfaces of degree?2 and is strongly semistable when restricted to the generic hypersurface of degree?2.     

Spectrophotometric study of the supramolecular complexes of [60]- and [70]Fullerenes with biscalix[6]arene and crown[4]calix[6]arene

[60]- and [70]Fullerenes have been shown to form 1:1 supramolecular complexes with bis[2-(5,11,17,23,29,35-hexa-tert-butyl-37,38,39,40,41-pentahydroxycalix[6]arenyl-oxy ethyl ether) (1) and 5,11,17,23,29,35-hexa-tert-butyl-37,38,40,41-tetra hydroxyl-39,42-(crown-4)calix[6]arene (2) in CHCl3 medium by electronic absorption spectroscopy. Formation constants (K) of the complexes of [60]- and [70]fullerenes with 1 and 2 have been determined at room temperature from which free energy of formation values of the complexes have been estimated. The very high formation constant value of [60]fullerene/1 complex (5900 dm3 mol-1) in indicative of formation of inclusion complex. Moreover, PM3 calculations reveal that intermolecular interaction between [60]fullerene and 1 proceeds through quite deep energy molecular orbital.     

Ni(II) complexation to amorphous hydrous ferric oxide: an X-ray absorption spectroscopy study

Ni(II) sorption onto iron oxides and in particular hydrous ferric oxide (HFO) is among the important processes impacting its distribution, mobility, and bioavailability in environment. To develop mechanistic models for Ni, extended X-ray absorption fine structure (EXAFS) analysis has been conducted on Ni(II) sorbed to HFO. Coprecipitation revealed the formation of the metastable alpha-Ni(OH)(2) at a Ni(II) loading of 3.5 x 10(-3) molg(-1). On the other hand, Ni(II) formed inner-sphere mononuclear bidentate complexes along edges of FeO(6) octahedra when sorbed to HFO surfaces with Ni-O distances of 2.05-2.07 A and Ni-Fe distances of 3.07-3.11 A. This surface complex was observed by EXAFS study over 2.8 x 10(-3) to 10(-1) ionic strength, pH from 6 to 7, a Ni(II) loading of 8 x 10(-4) to 8.1 x 10(-3) molg(-1) HFO, and reaction times from 4 hours to 8 months. The short- and long-range structure analyses suggest that the presence of Ni(II) inhibited transformation of the amorphous iron oxide into a more crystalline form. However, Ni(2+) was not observed to substitute for Fe(3+) in the oxide structure. This study systematically addresses Ni(II) adsorption mechanisms to amorphous iron oxide. The experimentally defined surface complexes can be used to constrain surface complexation modeling for improved prediction of metal distribution at the iron oxide/aqueous interface.     

A Halogen-Bond-Driven Artificial Chloride-Selective Channel Constructed from 5-Iodoisophthalamide-based Molecules

Despite considerable emphasis on advancing artificial ion channels, progress is constrained by the limited availability of small molecules with the necessary attributes of self-assembly and ion selectivity. In this study, a library of small molecules based on 5-haloisophthalamide and a non-halogenated isophthalamide were examined for their ion transport properties across the lipid bilayer membranes, and the finding demonstrates that the di-hexyl-substituted 5-iodoisophthalamide derivative exhibits the highest level of activity. Furthermore, it was established that the highest active compound facilitates the selective chloride transport that occurs via an antiport-mediated mechanism. The crystal structure of the compound unveils a distinctive self-assembly of molecules, forming a zig-zag channel pore that is well-suited for the permeation of anions. Planar bilayer conductance measurements proved the formation of chloride selective channels. A molecular dynamics simulation study, relying on the self-assembled component derived from the crystal structure, affirmed the paramount significance of intermolecular hydrogen bonding in the formation of supramolecular barrel-rosette structures that span the bilayer. Furthermore, it was demonstrated that the transport of chloride across the lipid bilayer membrane is facilitated by the synergistic effects of halogen bonding and hydrogen bonding within the channel.