Studies on the polymerization of ethyl acrylate. II. Chain transfer studies

Transfer constants for different solvents representing hydrocarbons, halogenated compounds, alcohols, ketones, acids, and esters were determined in the thermal polymerization of ethyl acrylate at 80°C and they are compared with the available data on methyl acrylate and ethyl methacrylate. It was observed from the values of transfer constants that ethyl acrylate radicals are a little more effective than methyl acrylate or ethyl methacrylate in abstracting hydrogen atom from hydrocarbons and alcohols. In acetic and n-butyric acid media, it has been found, by the aid of endgroup analysis, that the derived solvent radicals from transfer reactions are not too efficient to start a new chain.     

Thermogravimetric analysis of cobalt sulfate

Morpholine is a base of moderate strength, comparable with that of ammonia, and capable of forming -onium-type salts. Extensive studies [1,2] have been made on the thermal stability of ammonium perchlorate because of its technological use as an oxidant in solid state rocket propellants. The preparation, characterization and thermal behaviour of morpholinium perchlorate are reported in this note. The study was followed by XRD, IR, TG, DTA and mass spectral techniques.     

Conformational effects on vibronic spectra and excited state dynamics of 3-fluorobenzoic acid dimer

Two conformational isomers of 3-fluorobenzoic acid dimer (3-FBA(2)) have been identified in a supersonic jet expansion by use of laser-induced fluorescence excitation (FE), UV-UV hole-burning, and dispersed fluorescence (DF) spectroscopic methods. In the FE spectrum, the S(1) origins of the two isomeric species appear at a frequency gap of only 24 cm(-1), and the vibronic intensities of the redshifted dimer (dimer I) are about two times weaker than those of dimer II. However, ab initio quantum chemistry calculations at the MP2/6-31G(**) level of theory predict that all the isomeric species of 3-FBA(2) have almost the same binding energy (approximately 17 kcal/mol) in the ground state. Furthermore, unlike benzoic acid dimer, the present system shows intense activity for a low-frequency mode in both the FE and DF spectra. With the aid of DFT (B3LYP/6-311G(**)) predicted normal mode frequencies, we have assigned the mode to the in-plane gear (cogwheel) vibration of the cyclic hydrogen-bonded frame of the dimer. The Franck-Condon profiles for vibronic excitation of the mode indicate that the distortion of the cyclic hydrogen bond frame as a result of S(1)<--S(0) excitation is larger for dimer I than dimer II. Moreover, the fluorescence lifetime at the S(1) zero-point level of the former is also significantly smaller than the latter. Using the predictions of configuration interaction singles calculations, we have proposed that the spectral and dynamical differences between the two isomeric species observed in this study are manifestations of the different characteristics of their S(1) surfaces. By measuring FE, DF, and hole-burning spectra of a mixed dimer between 3-fluobenzoic acid and benzoic acid we have shown that the isomeric features in the homodimer spectra are due to two locally excited rotamers of the 3-fluorobenzoic acid moiety.     

Role of dimethyl sulfoxide as a solvent for vinyl polymerization

Dimethyl sulfoxide has been used as a solvent in the polymerization of methyl methacrylate and styrene. The chain-transfer coefficients of the solvent and the values of δ [i.e., (2k_t)^1/2/k_p] in solvent-monomer mixtures of various compositions were determined. δ was observed to be dependent on the solvent concentration in the case of methyl methacrylate but remained constant in case of styrene. The lowering of the values of δ with increasing solvent concentration in case of methyl methacrylate has been attributed to an interaction between the solvent and poly(methyl methacrylate) radical resulting in lower termination rate.     

Crystallization Temperature Limit of (Ba,Sr)TiO<Subscript>3</Subscript> Thin Films Prepared by a Non Oxocarbonate Phase Forming CSD Route

A new chemical solution deposition (CSD) route for the fabrication of Ba_0.7Sr_0.3TiO₃ (BST) thin films has been developed which completely prevents the formation of an intermediate oxo-carbonate phase. The latter has been reported previously by several authors to be responsible for increased crystallization temperatures. Barium and strontium diaminoethoxides were synthesized starting from pure barium and strontium metal and aminoethanol. These alkoxides were found to be readily soluble in a wide range of solvents and thus were excellent candidates for the CSD process. To prepare a stable precursor solution the aminoalkoxides were dissolved in 2-butoxyethanol and then used for the deposition of BST thin films. We conclude that the minimum crystallization temperature of 600C to be independent of the formation of the oxo-carbonate phase. DTA-TGA were performed on the precursors and their solutions to study their decomposition behaviour. All films annealed at different temperatures were physically characterized by XRD, IR, and SEM. The films prepared by this route at 650C were found to have high dielectric constant and the leakage currents were comparable to BST films prepared by normal carboxylate based routes at 750C.     

Metal chelates in vinyl polymerization: Bulk polymerization of acrylonitrile initiated by Cu(II)–imine complexes

This article deals with the kinetics and mechanism of acrylonitrile (AN) polymerization initiated by Cu(II)–4-anilino 3-pentene 2-one[Cu(II)ANIPO], Cu(II)–4-p-toluedeno 3-pentene 2-one [Cu(II)TPO], and Cu(II)–4-p-nitroanilino 3-pentene 2-one [Cu(II)NAPO] in bulk at 60°C. The polymerization is free radical in nature. The exponent of initiator(I) is ? 0.5. The initiation step is a complex formation between the chelate and monomer and subsequent decomposition of the intermediate complex giving rise to free radical and Cu(I). This is substantiated by ultraviolet (UV) and electron spin resonance (ESR) studies. The activation energies and kinetic and chain transfer constants have also been evaluated.     

Polymerization of methyl methacrylate with cupric laurate–benzoin system as initiator

The polymerization of methyl methacrylate initiated by cupric laurate in combination with benzoin has been investigated in carbon tetrachloride medium at 60°C. The rate of polymerization was found to be proportional to the square root of both cupric ion and benzoin concentrations, and to the 1.5th power of the monomer concentration. Spectral studies indicated that there is a complex formation between cupric ion and the monomer methyl methacrylate. A reaction scheme, based on initial formation of the complex and its subsequent reaction with benzoin to produce the free radicals responsible for initiation has been postulated to explain the observed results.     

Synthesis and characterization of Boc-protected 4-amino- and 5-amino-pyrrole-2-carboxylic acid methyl esters

Syntheses of Boc-protected 4-amino- and 5-amino-pyrrole-2-carboxylic acid methyl esters have been achieved and the structures of these compounds have been fully characterized by detailed NMR studies.     

Molecular pair potential of chiral amino acid amphiphile in Langmuir monolayers on the basis of an atomistic model

In the present work, the pair potential of enantiomeric N-palmitoyl aspartic acid amphiphile monolayer at the air/water interface is calculated based on an atomistic model. The molecular structure and partial charges are calculated using two semi empirical (PM3, AM1) and one empirical (Gasteiger and Marcili) methods. A distance-dependent dielectric function is used to represent the interfacial dielectric constant at the aqueous subphase. The present study indicates that a pair of molecules have favorable interaction at specific ranges of mutual orientations. Other orientations are favorable but at larger separations. Favorable electrostatic interaction at a specific combination of orientation and short separations of the head groups significantly contribute to the total energy. The curvature of the domain boundary is suggested to be driven by the favorable arrangement which is dependent on the pair potential of molecules. The use of charges obtained by the PM3 and GM do not lead to a significant variation of the orientation-dependent features, while the AM1 predicts higher partial charges and interactions are stronger than the former two methods. However, orientation-dependent features remain the same. The variations in the LJ parameters and charges indicate that the conclusions made are insensitive to the choice of parameters. The mutual favorable interaction predicted by calculation agree with the handedness of curvature of domains.     

Interaction of adenine and thymine with aqueous sugar solutions

The solubility of the nucleic acid bases, adenine and thymine, in aqueous erythritol, xylose, glucose, and sucrose solutions has been studied. The solubility of adenine increases linearly with glucose and sucrose concentration, whereas with the other reagents a nonlinear increase is observed. Below 1.5M reagent concentration, the solubility of adenine increases in the order erythritol < robose, xylose < glucose < sucrose. The solubility of thymine in these solutions, on the other hand, decreases, increases, or does not change depending upon the reagent. The effect of temperature on the solubility of adenine and thymine in sugar solution indicates that the transfer of these molecules from water to sugar solution is exothermic.Presented in part at the VIIth All-India Symposium in Biophysics held at Visva Bharati University during October 1976.