Tri-amine functionalized graphene oxide for co-operative catalyst in the Henry reaction

Research on Chemical Intermediates - Novel tri-amine functionalized graphene oxide (TGO) material was synthesized using organo silane {3-[2-(2-amino ethyl amino) ethyl amino] propyl trimethoxy...     

A self-assembled tetrapeptide that acts as a “turn-on” fluorescent sensor for Hg2+ ion

The tetrapeptide (Bz-$\mathrm{\Delta }$Phe(p-NPh₂)-l-DOPA(protected)-l-Phe-l-Phe-OMe was designed to incorporate seven phenyl rings so that it’s conformation, self-assembly and application in Hg²⁺ ions sensing could be studied. Peptide molecules adopted an overlapping β-turn of type III/III conformation in crystals. The peptide showed a highly selective turn-on response towards mercuric ion over other metal ions with a 10-fold enhancement in fluorescence intensity. This intensity change coupled with the selectivity of the peptide towards mercury allowed us to demonstrate simple colorimetric dip sensing of Hg²⁺ ions. The technique provides a highly selective and effective way to detect Hg²⁺ ions. The peptide also self-assembled into nanospheres with diameter ranges from 100 to 500?nm. Mercuric ion coordination enabled these peptide nanospheres to aggregate into well-defined nanoparticles. The enhanced fluorescence upon Hg²⁺ addition demonstrates that peptide scaffolds can be exploited in the development of different selective sensors.     

Automated derivatization and analysis of malondialdehyde using column switching sample preparation HPLC with fluorescence detection

Analyte derivatization is advantageous for the analysis of malondialdehyde (MDA) as a biomarker of oxidative stress in biological samples. Conventionally, however, derivatization is time consuming, error-prone and has limited options for automation. We have addressed these challenges for the solid phase analytical derivatization of MDA from small volume tissue homogenate samples. A manual derivatization method was first developed using Amberlite XAD-2 (12 mg) as the solid phase. Subsequently an automated column switching process was developed that provided simultaneous derivatization and extraction of the MDA-DH hydrazone product on a cartridge packed with XAD-2, followed by quantitative elution of the product to an analytical LC column (Waters NovoPak C18, 3.9 x 150 mm). The LOD was 0.02 microg/mL and recovery was quantitative. The method was linear (r(2) >0.999) with precision < 5% from the LOQ (0.06 microg/mL) to at least 35 microg/mL. The method was successfully applied to the analysis of small volume (30 microL) mouse tissue homogenate samples. Endogenous levels of MDA in the tissues ranged from 20 to 40 nmol/g tissue (ca. 0.1-0.2 microg/mL homogenate). Compared to conventional MDA analyses, the current method has advantages in automation, selectivity, precision and sensitivity for analysis from very small sample volumes.     

Application of water-activated carbon isotherm models to water adsorption isotherms of single-walled carbon nanotubes

The objective of this study is to understand the interactions of water with novel nanocarbons by implementing semiempirical models that were developed to interpret adsorption isotherms of water in common carbonaceous adsorbents. Water adsorption isotherms were gravimetrically determined on several single-walled carbon nanotube (SWNT) and activated carbon samples. Each isotherm was fitted to the Dubinin-Serpinsky (DS) equation, the Dubinin-Astakov equation, the cooperative multimolecular sorption theory, and the Do and Do equations. The applicability of these models was evaluated by high correlation coefficients and the significance of fitting parameters, especially those that delineate the concentration of hydrophilic functional groups, micropore volume, and the size of water clusters. Samples were also characterized by spectroscopic and adsorption techniques, and properties complementary to those quantified by the fitting parameters were extracted from the data collected. The comparison of fitting parameters with sample characterization results was used as the methodology for selecting the most informative and the best-fitting model. We conclude that the Do equation, as modified by Marban et al., is the most suitable semiempirical equation for predicting from experimental isotherms alone the size of molecular clusters that facilitate adsorption in SWNTs, deconvoluting the experimental isotherms into two subisotherms: adsorption onto hydrophilic groups and filling of micropores, and quantifying the concentration of hydrophilic functional groups, as well as determining the micropore volume explored by water. With the exception of the DS equation, the application of other water isotherm models to SWNTs is not computationally tractable. The findings from this research should aid studies of water adsorption in SWNTs by molecular simulation, which remains the most popular tool for understanding the microscopic behavior of water in nanocarbons.     

Exploring the organization and dynamics of hippocampal membranes utilizing pyrene fluorescence

The organization and dynamics of cellular membranes in the nervous system are crucial for the function of neuronal membrane receptors and signal transduction. Previous work from our laboratory has established hippocampal membranes as a convenient natural source for studying neuronal receptors. In this paper, we have monitored the organization and dynamics of hippocampal membranes and their modulation by cholesterol using pyrene fluorescence. The apparent dielectric constant experienced by pyrene in hippocampal membranes turns out to be approximately 20+/-3, depending on the experimental condition. Our results show that the polarity of the hippocampal membrane is increased upon cholesterol depletion, as monitored by changes in the ratio of pyrene vibronic peak intensities (I1/I3). This is accompanied by an increase in lateral diffusion, measured as an increase in the pyrene excimer/monomer ratio. These results are relevant in understanding the complex organization and dynamics of hippocampal membranes and could have implications in neuronal diseases characterized by defective cholesterol metabolism.     

Regioselective competitive adsorption of water and organic vapor mixtures on pristine single-walled carbon nanotube bundles

Sequential adsorption of water and organic vapor mixtures onto single-walled carbon nanotube (SWNT) bundles is studied experimentally and by grand canonical Monte Carlo (GCMC) simulation to elucidate the distinct interactions between select adsorbates and the nanoporous structure of SWNTs. Experimental adsorption isotherms on SWNT bundles for hexane, methyl ethyl ketone, cyclohexane, and toluene individually mixed in carrier gases that were nearly saturated with water vapor are compared with the GCMC-simulated isotherms for hexane, as a representative organic, on the external surface of the heterogeneous SWNT bundles. From the nearly perfect overlap between the experimental and simulated isotherms, it is concluded that until near saturation only the internal pore volume of pristine SWNT bundles fills with water. The adsorption of water vapor on the peripheral surface of the bundles remains insignificant, if not negligible, in comparison to the adsorption of water in the internal volume of the bundles. This is in contrast with the adsorption of pure hexane, which exhibits appreciable adsorption both inside the bundles and on their external surface. It is also suggested that during competitive adsorption, water molecules take precedence over small nonpolar and polar organic molecules for adsorption inside SWNTs and leave unoccupied the hydrophobic external surface of the bundles for other more compatible adsorbates.     

Templated growth of hybrid structures at the peptide-peptide interface

This study describes the use of peptide vesicular platforms for the templated growth of fibrillar structures to craft hybrids that retain the gross morphological features of two discreet self-assembled peptides. A synthetic triskelion peptide, which results in the rapid emergence of self-assembled spherical structures, was employed as a template. Addition of either one of two different peptides, both of which form long filamentous structures when co-incubated with the triskelion solution, affords hybrids that retain the gross morphology of both the spherical and filamentous structures. It is surmised that this process is aided by hydrogen bonding and the interdigitation of aromatic residues, which leads to the growth of hybrid structures. We believe that observations concerning the surface-assisted growth of peptide fibrils and tubular structures from vesicular platforms may have ramifications for the design and development of peptide-based hybrid materials with controlled hierarchical structures.     

Valence-state analysis through spectroelectrochemistry in a series of quinonoid-bridged diruthenium complexes [(acac)(2)Ru(mu-L)Ru(acac)(2)](n) (n=+2, +1, 0, -1, -2)

The quinonoid ligand-bridged diruthenium compounds [(acac)(2)Ru(mu-L(2-))Ru(acac)(2)] (acac(-)=acetylacetonato=2,4-pentanedionato; L(2-)=2,5-dioxido-1,4-benzoquinone, 1; 3,6-dichloro-2,5-dioxido-1,4-benzoquinone, 2; 5,8-dioxido-1,4-naphthoquinone, 3; 2,3-dichloro-5,8-dioxido-1,4-naphthoquinone, 4; 1,5-dioxido-9,10-anthraquinone, 5; and 1,5-diimido-9,10-anthraquinone, 6) were prepared and characterized analytically. The crystal structure analysis of 5 in the rac configuration reveals two tris(2,4-pentanedionato)ruthenium moieties with an extended anthracenedione-derived bis(ketoenolate) pi-conjugated bridging ligand. The weakly antiferromagnetically coupled {Ru(III)(mu-L(2-))Ru(III)} configuration in 1-6 exhibits complicated overall magnetic and EPR responses. The simultaneous presence of highly redox-active quinonoid-bridging ligands and of two ruthenium centers capable of adopting the oxidation states +2, +3, and +4 creates a large variety of possible oxidation state combinations. Accordingly, the complexes 1-6 exhibit two reversible one-electron oxidation steps and at least two reversible reduction processes. Shifts to positive potentials were observed on introduction of Cl substituents (1-->2, 3-->4) or through replacement of NH by O (6-->5). The ligand-to-metal charge transfer (LMCT) absorptions in the visible region of the neutral molecules become more intense and shifted to lower energies on stepwise reduction with two electrons. On oxidation, the para-substituted systems 1-4 exhibit monocation intermediates with intervalence charge transfer (IVCT) transitions of Ru(III)Ru(IV) mixed-valent species. In contrast, the differently substituted systems 5 and 6 show no such near infrared (NIR) absorption. While the first reduction steps are thus assigned to largely ligand-centered processes, the oxidation appears to involve metal-ligand delocalized molecular orbitals with variable degrees of mixing.