A terahertz polarization insensitive dual band metamaterial absorber

Metamaterial absorbers have attracted considerable attention for applications in the terahertz range. In this Letter, we report the design, fabrication, and characterization of a terahertz dual band metamaterial absorber that shows two distinct absorption peaks with high absorption. By manipulating the periodic patterned structures as well as the dielectric layer thickness of the metal-dielectric-metal structure, significantly high absorption can be obtained at specific resonance frequencies. Finite-difference time-domain modeling is used to design the structure of the absorber. The fabricated devices have been characterized using a Fourier transform IR spectrometer. The experimental results show two distinct absorption peaks at 2.7 and 5.2?THz, which are in good agreement with the simulation. The absorption magnitudes at 2.7 and 5.2?THz are 0.68 and 0.74, respectively.     

Ultrasonic pretreatment of corn slurry for saccharification: A comparison of batch and continuous systems

The effects of ultrasound on corn slurry saccharification yield and particle size distribution was studied in both batch and continuous-flow ultrasonic systems operating at a frequency of 20 kHz. Ground corn slurry (28% w/v) was prepared and sonicated in batches at various amplitudes (192–320 μm_{peak-to-peak (p–p)}) for 20 or 40 s using a catenoidal horn. Continuous flow experiments were conducted by pumping corn slurry at various flow rates (10–28 l/min) through an ultrasonic reactor at constant amplitude of 12 μm_p–p. The reactor was equipped with a donut shaped horn. After ultrasonic treatment, commercial alpha- and gluco-amylases (STARGEN^TM 001) were added to the samples, and liquefaction and saccharification proceeded for 3 h. The sonicated samples were found to yield 2–3 times more reducing sugars than unsonicated controls. Although the continuous flow treatments released less reducing sugar compared to the batch systems, the continuous flow process was more energy efficient. The reduction of particle size due to sonication was approximately proportional to the dissipated ultrasonic energy regardless of the type of system used. Scanning electron microscopy (SEM) images were also used to observe the disruption of corn particles after sonication. Overall, the study suggests that both batch and continuous ultrasonication enhanced saccharification yields and reduced the particle size of corn slurry. However, due to the large volume involve in full scale processes, an ultrasonic continuous system is recommended.     

An improved model for computing the reflectivity of a AlAs/GaAs based distributed bragg reflector and vertical cavity surface emitting laser

In this paper, reflectivity of a Distributed Bragg Reflector (DBR) has been computed by considering the effects of changes of wavelength on the changes of the refractive index of the materials of DBR layers. The intrinsic losses of the materials have been included in the computation of the reflectivity of the DBR. It has been found that the effect of change of the wavelength on the refractive index of the DBR materials reduces the Full Width Half Maxima (FWHM) of the stop band significantly which is expected to improve the laser characteristics. If the FWHM is reduced, the thickness of the active layer of a VCSEL can also be reduced which will further reduce the threshold current of the device. It has been found that the intrinsic losses of the materials have a significant effect on the reflectivity of a DBR. It has also been found that peak reflectivity of a 20 pair AlAs/GaAs DBR reduces by 0.2% after including the intrinsic losses (with a value of the intrinsic losses α = 10 cm^?1).     

Constructing ‘hair’ for the three charge hole

It has been found that the states of the 2-charge extremal D1–D5 system are given by smooth geometries that have no singularity and no horizon individually, but a ‘horizon’ does arise after ‘coarse-graining’. To see how this concept extends to the 3-charge extremal system, we construct a perturbation on the D1–D5 geometry that carries one unit of momentum charge P. The perturbation is found to be regular everywhere and normalizable, so we conclude that at least this state of the 3-charge system behaves like the 2-charge states. The solution is constructed by matching (to several orders) solutions in the inner and outer regions of the geometry. We conjecture the general form of ‘hair’ expected for the 3-charge system, and the nature of the interior of black holes in general.     

Littrow-type discretely tunable, Q-switched Nd:YAG laser around 1.3 μm

An all-solid-state, side diode array pulse pumped Nd:YAG laser tunable for six wavelengths ranging from 1318.8 nm to 1356.0 nm is developed. The tunability is obtained by using a grating in Littrow mode that also serves as an output coupler. The configuration ensures a line width as low as 0.04 nm. Thermal effects limit the maximum average power to 250 mW for an average absorbed pump power of 8.0 W in the free-running condition. An acousto-optic Q-switching of the laser provides pulses of width 251 ns with peak power of 733 W for an average pump power of 11.5 W. The laser may find application in microsurgery and dermatology. PACS 42.55.Xi; 42.60.-v; 42.60.Fc; 42.60.Gd; 42.62.Be     

The absorption spectrum of methane at 80 and 294 K in the icosad (6717–7589 cm−1): Improved empirical line lists,isotopologue identification and temperature dependence

Using a cryogenic cell and a series of Distributed Feed Back (DFB) diode lasers, new high resolution spectra of methane have been recorded at 80 K and room temperature by differential absorption spectroscopy (DAS) between 6717 and 7589 cm^?1 (1.49–1.32 μm). The investigated spectral region corresponds to the very congested icosad, which is not tractable by theory. Empirical lists of 19,940 and 24,001 lines were constructed from the 80 K and room temperature spectrum, respectively. The room temperature list adds about 8500 features to the empirical list of 15,375 lines at 296 K adopted in the HITRAN database from the original work of L. Brown (Brown, L. Empirical line parameters of methane from 1.1 to 2.1 μm. JQSRT 2005;96:251–70). A number of relatively strong CH₄ lines located near strong water lines were found missing in the HITRAN line list. The improved sensitivity allowed adding more than 7000 lines to our previous list of about 12,000 transitions at 80 K (Campargue A, Wang L, Kassi S, Ma?át M, Votava O. Temperature dependence of the absorption spectrum of CH₄ by high resolution spectroscopy at 81 K: (II) The Icosad region (1.49–1.30 μm). JQSRT 2010;111:1141–51). In order to facilitate identification of the transitions of the different methane isotopologues present in “natural” isotopic abundance, spectra of highly enriched CH₃D and ¹³CH₄ samples were recorded with the same experimental setup, both at room temperature and at 80 K.From the variation of the line strengths between 80 K and 294 K, the low energy values of about 12,000 transitions were determined. They allow accounting for the temperature dependence of 84 and 93% of the methane absorbance in the region, at room temperature and 80 K, respectively. As a result, we provide as supplementary material two complete line lists at 80 K and 294 K, including CH₃D and ¹³CH₄ identification and lower state energy values.     

Generation of femtosecond pulses at 1350 nm by Cerenkov radiation in higher-order-mode fiber

We demonstrate a method of generating short pulses at 1350 nm by exciting Cerenkov radiation in a higher-order-mode fiber with a 1064 nm femtosecond fiber laser. We measure a 106 fs, 0.66 nJ output pulse. Cerenkov radiation in fibers allows for energy transfer between a soliton and a dispersive wave, providing an effective and engineerable platform to shift the wavelength of a femtosecond source. With appropriate design of the higher-order-mode fiber, this method of generating short pulses at 1350 nm can be extended to other wavelengths and to higher pulse energies.