Construction of a photon drag detector for evaluating the performance of a CO2 laser amplifier

In this article, the construction of P-type germanium (Ge) photon drag detector which is used to characterize the gain and output powers of a 10 W CO₂ laser and a CO₂ laser amplifier is described. Gain and laser amplifier output power versus laser input power measurements collected at 4.7 mbar and 12.0 mbar amplifier tube pressures are discussed. Moreover, measurements relating the CO₂ laser output power to the laser tube discharge current are provided at 6.9 mbar and 7.3 mbar tube pressures.     

Scanning tunneling spectroscopy of Cl vacancies in NaCl films: strong electron-phonon coupling in double-barrier tunneling junctions

Broad Gaussian line shapes are observed in scanning tunneling spectroscopy of single, localized electronic states induced by Cl vacancies in ultrathin NaCl films on Cu surfaces. Using a simple inelastic resonance tunneling model, we show that the observed broad line shapes are caused by a strong coupling between the localized state and the optical phonons in the film. The parameters for the model are obtained from density functional calculations, in which the occupation of the vacancy state temporarily taking place in the experiment has also been accounted for.     

LR-CAHSQC: an application of a Carr-Purcell-Meiboom-Gill-type sequence to heteronuclear multiple bond correlation spectroscopy

A new pulse sequence, long-range CPMG-adjusted heteronuclear single quantum coherence (LR-CAHSQC), is proposed for the determination of long-range JCH coupling constants from a long-range 1H-13C correlation experiment. The long-range heteronuclear coupling constants can be directly extracted from COSY-type antiphase peak patterns. The current approach utilizes CPMG-sequences for polarization transfer, and thus avoids the evolution of homonuclear JHH couplings, which normally may introduce abnormalities into the cross peak pattern. The differences between LR-CAHSQC and normal LR-HSQC are discussed.     

On convergence of homotopy analysis method and its modification for fractional modified KdV equations

In this paper, the homotopy analysis method (HAM) and its modification (MHAM) are applied to solve the nonlinear time- and space-fractional modified Korteweg-de Vries (fmKdV). The fractional derivatives are described by Caputo’s sense. Approximate and exact analytical solutions of the fmKdV are obtained. The MHAM in particular overcomes the computing difficulty encountered in HAM. Convergence theorems for both the homogeneous and non-homogeneous cases are given. The results of applying this procedure to the studied cases show the high accuracy and efficiency of the approach.     

Li‐doped nanosized TiO2 powder with enhanced photocalatylic acivity under sunlight irradiation

This work reports on the synthesis of Li‐doped TiO₂ nanoparticles using the sol–gel process and solid‐state sintering, and investigates their potential use as a photocatalyst for degradation under sunlight excitation of different organic model compounds in aqueous solution. The structure of the nanocrystals was examined by X‐ray diffraction, UV‐vis ground state diffuse reflectance absorption spectra and X‐ray photoelectron emission spectroscopy. Results showed that samples prepared by sol–gel process and calcined at 400 °C are composed of a mixture of anatase and rutile phases, in contrast to the one prepared by solid‐state sintering, which exhibits an anatase phase with Li being involved in a spinel phase. The photocatalytic degradation of aqueous solutions of different aromatic compounds was successfully achieved under sunlight excitation in presence of Li‐doped TiO₂ prepared via sol–gel process. It was shown that the calcination temperature and the preparation mode greatly affect the photocatalytic efficiency. Copyright © 2010 John Wiley & Sons, Ltd.     

Multi-residue analysis and ultra-trace quantification of 36 priority substances from the European Water Framework Directive by GC-MS and LC-FLD-MS/MS in surface waters

A multi residue analysis was developed for screening, quantification and confirmation of 36 priority organic compounds included in the 2000/60/EC European Water Framework Directive. The compounds analyzed included 19 pesticides, 8 PAH, 5 endocrine-disruptors and 4 organochlorine compounds. The method was developed in three steps. First, automated off-line solid-phase extraction using Strata X cartridges was optimized to trap simultaneously the 36 studied compounds. Second, the more volatile compounds were analysed by gas chromatography coupled to mass spectrometry with electron impact ionisation in selected ion monitoring mode (SIM). Third, the last 20 compounds were detected and quantified, in one run, by liquid chromatography coupled to fluorescence detector and tandem mass spectrometry. The excellent selectivity and sensitivity allowed us satisfactory quantification and confirmation at levels as low as 0.2-67 ng L⁻¹ with recoveries between 59 and 105%. Such methodology was then applied to French surface waters: all the waters present organic contaminants, and their concentration varied according to the origin and nature of substances.     

Solubility of pyrene in simple and mixed solvent systems

The solubility of pyrene was experimentally determined in simple and complex solvent systems (single, binary, ternary, quaternary and pentinary solvent systems) composed of benzene, ethylbenzene, hexane, hexanol and methylcyclohexane over a temperature range from 293 to 318 K. In addition, six models were used in this study to represent pyrene solubility in the different solvent systems. The interaction parameters for modified Wilson, NIBS/Redlich-Kister, UNIQUAC and NRTL models were estimated using the solubility data generated for pyrene in single, binary and ternary solvent systems. By re-adjusting the interaction parameters reported for Dortmund UNIFAC and ASOG models, a better representation of the solubility of pyrene was obtained compared to using reported values. Furthermore, a correction term is introduced for the ASOG model in this study to better improve pyrene solubility prediction in simple and mixed solvent systems. These estimated or re-adjusted interaction parameters for the different models, along with the reported parameters for Dortmund UNIFAC and ASOG models, were tested on complex solvent systems (quaternary and pentinary solvent mixtures), in order to check their validity and accuracy for such predictions.     

Solid phase selective separation and green preconcentration of Cu, Zn, Pb and Cd in drinking water by using novel functionalized resin

A new solid — phase extraction sorbent was developed based on stepwise anchoring of two ligand molecules for the determination of copper, zinc, lead and cadmium in drinking water by flame AAS. Amberlite XAD-2 functionalized with 4′-(2-hydroxyphenylazo)-3′-methyl-1′-phenyl-2′-pyrazolin-5′-one (HPAPyr) was utilized for preconcentration/separation of these elements. The sorbent was prepared by two successive azo coupling reactions. First, 2-aminophenol was anchored to the amino groups in the resin resulted from nitration followed by reduction. Then, the resulted 2-aminophenol functionalized resin was further diazotized and coupled to the pyrazolone compound and the final product HPAPyr-XAD-2 was characterized by IR and elemental analysis. The optimum pH range for sorption, shaking time, exchange capacity, sample flow rate, preconcentration factor and interference from co-existing ions were investigated. All metal ions were quantitatively desorbed from the resin by 4.5 mol L⁻¹ nitric acid solution. The sorbent provides limit of detection within the range 0.9–3.3 μg L⁻¹ and concentration factor up to 250. The procedure was validated by analysis of certified material NIST-SRM 1577b. Application to drinking water showed satisfactory results with relative standard deviation RSD ≤ 8.5%.      

How Does Electrostatic Activation Control Iminium‐Catalyzed Cyclopropanations?

Prediction of lg k = s ( N + E ) verified : In contrast to previous statements, ordinary α,β‐unsaturated iminium ions do react with sulfur ylides. Electrostatic interactions accelerate the reactions by a factor of more than 10⁵ and are responsible for the high stereoselectivity.