Some general results on the stability and flow failure of rigid viscoplastic structures

The evolution of structures made of materials which obey a rigid viscoplastic constitutive law, conceived as a generalisation of the classical Bingham model, and submitted to several loading parameters, is examined here in connection with the limit analysis (or yield design) theorems. A minimum principle for the velocities is established, from which it is shown in particular that the structure remains motionless as far as the loading belongs to the domain of safe loadings, while flow failure is triggered as soon as it is loaded beyond its limit load. Such a property is illustrated on the example of a uniform layer of Bingham material flowing on an inclined plane, due to the combined action of gravity and surface shear loading, considered as two independent loading parameters.     

Principe d'incertitude SAK de Fefferman

We give a version of the SAK-Fefferman principle which allows us to compare powers of subelliptic pseudo-differential operators in the setting of Weyl–Hörmander calculus. To cite this article: S. Mustapha, C. R. Acad. Sci. Paris, Ser. I 342 (2006).     

Identification and characterization of the degradation products of prasugrel hydrochloride tablets using LC-MS technique

New high-performance liquid chromatography method was developed for the determination of prasugrel HCl-related substances. Impurity profile of prasugrel HCl was established by studying the degradation profile of it as an active pharmaceutical ingredient, for the first time, in the tablet form. Two significant unknown degradation products (impurities) were detected and characterized, to the best of our knowledge; these impurities have not been previously reported in the literature. The first one resulted from acidic, basic, and neutral hydrolyses of prasugrel; it was nominated as impurity 1 (5-(2-cyclopropyl-1-(2-fluorophenyl)-2-oxoethyl)-4,5,6,7-tetrahydrothieno[3,2-c]pyridin-2(3H)-one), its structure was proposed using liquid chromatography/mass spectrometry technique. The second degradant was nominated as impurity 2 (5-(2-cyclopropyl-1-(2-fluorophenyl)-2-oxoethyl)-7a-hydroxy-5,6,7,7a-tetrahydrothieno[3,2-c]pyridin-2(4H)-one) that formed upon neutral hydrolysis of prasugrel with magnesium stearate; this impurity was identified using nuclear magnetic resonance and LC-MS techniques. Based on these findings, other lubricant materials should be used in prasugrel tablets instead of magnesium stearate to avoid formation of such impurity. Prasugrel HCl was susceptible to hydrolytic and oxidative degradation, whereas it was stable under these conditions.     

Gas chromatography/mass spectrometry of polychlorinated biphenyls using atmospheric pressure chemical ionization and atmospheric pressure photoionization microchips

Gas chromatography (GC) and ion trap mass spectrometry (MS) were combined with microchip atmospheric pressure chemical ionization (microAPCI) and microchip atmospheric pressure photoionization (microAPPI) sources. Selected polychlorinated biphenyls (PCBs, IUPAC Nos. 28, 52, 101, 118, 138, 153 and 180) were analyzed by GC/microAPCI-MS and GC/microAPPI-MS to demonstrate the applicability of the miniaturized ion sources in negative ion mode analysis. The microAPCI and microAPPI methods were evaluated in respect of detection limit, linearity and repeatability. The detection limits for the PCB congeners were somewhat lower with microAPCI than with microAPPI, whereas microAPPI showed slightly wider linear range and better repeatability. With both methods, the best results were obtained for highly chlorinated or non-ortho-chlorinated PCBs, which possess the highest electron affinities. Finally, the suitability of the GC/microAPPI-MS method for the analysis of PCBs in environmental samples was demonstrated by analyzing soil extracts, and by comparing the results with those obtained by gas chromatography with electron capture detection (GC/ECD).     

New hybrid films based on cellulose and hydroxygallium phthalocyanine. Synergetic effects in the structure and properties

Hydroxygallium phthalocyanine (HOGaPc) and cellulose (from a trimethylsilyl derivative) have been used as native elements for the preparation of a novel family of hybrid films. By spin-coating, both components allow the building of films with different configurations on various substrates in a controlled way. The particularities of these hybrid films have been characterized by a range of techniques such as Fourier transform infrared spectroscopy (FTIRS) in attenuated total reflection using multiple internal reflections (ATR/MIR), absorption ultraviolet and visible spectroscopy (UV-vis), X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and surface potential measurements using the Kelvin-Zisman vibrating capacitor probe (KP). This enabled determination of the influence of cellulose on the arrangement of HOGaPc and, consequently, control of the relation between the structure and the properties of the films. Finally, gas sensor tests were performed to check the potentialities of these hybrid films. In particular, the synergetic behavior between the film-forming materials allows a fast and sensible change in surface potential after cyclic exposures to ozone (O3, 100 ppb) and nitrogen. Overall, we present the advantages of combining phthalocyanine with cellulose in enhancing the properties of the final product. Introduction of cellulose as a host material opens up a new area of hybrid films.     

Superelectrophilicity of the nitroolefinic fragment of 4-nitrobenzodifuroxan in Michael-type reactions with indoles: a kinetic study in acetonitrile

The kinetics of the coupling of 4-nitrobenzodifuroxan (NBDF) with a series of indoles 8 a-e to give the expected Michael-type adducts 9 a-e have been investigated in acetonitrile solution. No significant influence of the nature of the isotopic substitution at C-3 of the indole ring has been found, indicating that the NBDF addition step is the rate limiting step of the SEAr substitution of the indole moiety. This implies that the measured second-order rate constants (k) for the reactions are identical to the second order rate constants (k1NBDF) associated to the C--C coupling step. By using the known N and s parameters characterizing the nucleophilicity of indoles, the k1NBDF rate constants are found to fit nicely to the three parameters equation logk1=s(N+E) introduced by Mayr to describe the feasibility of nucleophilic-electrophilic combinations. Based on this, the electrophilicity parameter E of NBDF could be determined as E=-6.15. This corresponds to a positioning of the reactivity of the nitroactivated double bond of NBDF in the domain of superelectrophilicity previously defined for nitrobenzofuroxans, in accord with the finding that the rates of coupling of 8 a-e with NBDF are only one order of magnitude lower than those for the coupling of these indoles with 4,6-dinitrobenzofuroxan (DNBF). The theoretical scale of electrophilicity introduced by Domingo et al. on the basis of the global electrophilicity index omega defined by Parr is also a very useful tool to discuss the relative reactivities of NBDF, DNBF, and a number of differently activated C==C double bonds.     

Self-assembly of hybrid dendrons with complex primary structure into functional helical pores

The synthesis of three libraries of self-assembling hybrid dendrons containing a primary structure based on the sequence (4-3,4-3,5)12G2-CO(2)CH(3) generated from benzyl ether, biphenyl-4-methyl ether, and AB(2) repeat units constructed from (AB)(y)--AB(2) combinations of benzyl ethers, is reported. The structural and retrostructural analysis of their supramolecular dendrimers facilitated the discovery of new architectural principles that lead to the assembly of functional helical pores. The self-assembly of an example of hybrid dendron containing -H, -CO(2)CH(3), -CH(2)OH, -COOH, -COOK, -CONH(2), -CONHCH(3), -CO(2)(CH(2))(2)OCH(3), -(R) and -(S)-CONHCH(CH(3))C(2)H(5) as X-groups at the apex demonstrated that these self-assembling dendrons provide the simplest strategy for the design and synthesis of porous columns containing a diversity of hydrophilic and hydrophobic functional groups in the inner part of the pore. The results reported here expand the scope and limitations of dendrons available for the self-assembly of functional pores that previously were generated mostly from dendritic dipeptides, to simpler architectures based on hybrid dendrons.     

Silicon micropillar array electrospray chip for drug and biomolecule analysis

We have developed a lidless micropillar array electrospray ionization chip (microPESI) combined with mass spectrometry (MS) for analysis of drugs and biomolecules. The microPESI chip, made of silicon, contains a sample introduction spot for a liquid sample, an array of micropillars (diameter, height, and distance between pillars in the range of 15-200, 20-40, and 2-80 microm, respectively), and a sharpened tip for direct electrospray formation. The microchips were fabricated using deep reactive ion etching (DRIE) which results in accurate dimensional control. The chip, providing a reliable open-channel filling structure based on capillary forces and a electrospray emitter tip for ionization, allows an easy operation and reliable, non-clogging liquid transfer. The microPESI chip can be used for a fast analysis using single sampling or for continuous infusion measurements using a syringe pump for sample introduction. The microPESI-MS shows high sensitivity, with limit of detection 30 pmol/L (60 amol or 28 fg) for verapamil measured with tandem mass spectrometry (MS/MS) and using a sample volume of 2.5 microL. The system shows also good quantitative linearity (r2 > 0.99) with linear dynamic range of at least six orders of magnitude and good ion current stability (standard deviation <5%) in 1-h continuous flow measurement. The microPESI-MS is shown to be a very potential method for direct analysis of drugs and biomolecules.