Critical needs of fringe-order accuracies in two-color holographic interferometry

Two-color holographic interferometry is a promising technique for separating simultaneous concentration and temperature variations in solution for crystal-growth experiments on earth and in microgravity conditions in space. The ultimate success depends on two linearly independent fringe patterns due to the different wavelengths. With available practical lasers and typical crystal-growth experimental conditions the two interference fringe patterns (other than scale effects) may not be too different. The slight error in the measured fringe order can then yield large uncertainty in temperature and concentration determination. This aspect is analytically considered for the first time in this article. A simple cell (rectangular parallelpiped) is considered containing the fluid. For simplicyt, we assume a constant field along the object-wave-propagation direction in the cell. The two reconstructed fringe patterns are then represented in terms of temperature and concentration variations. Solving two equations theoretically yields the desired temperature and concentration. However, once the fringe-postition measurement error is introduced, error in the temperature and concentration results. These errors are analytically determined. A particular case of TGS (triglycine sulfate) aqueous solution with HeNe (λ=632.8 nm) and HeCd (λ=441.6 nm) lasers for holography is critically discussed. It is found that a high degree of accuracy in the fringe order is required in this particular case. To improve fringe-position measurements, special techniques such as electronic phase measurement or heterodyne detection may be necessary. The study provides the analytical guidelines for designing the experiments and critical needs of desired physical parameters. Paper was presented at the 1990 SEM Fall Conference on Experimental Mechanics held in Baltimore, MD on November 5–8.     

Interaction between the effects of local and overall imperfections on the buckling of elastic columns

A. van derNeut has studied the buckling of elastic columns made from thin-walled members, with particular reference to the effects of imperfections. In this paper, a graphical method is used to extend his work and to make an exhaustive study of the combined effects of both ‘local’ and ‘overall’ imperfections. The resulting picture is remarkably simple, and the effects of imperfections are well described by the celebrated Perry formula in conjunction with a single imperfection parameter compounding simply the local and overall imperfections. Experiments on small-scale rubber model columns substantiate the main results of the theoretical analysis.     

Recoil in macromolecular solutions according to rigid dumbbell kinetic theory

A macromolecular solution is represented by the simple model of rigid dumbbells suspended in a Newtonian fluid with Brownian motion included. Hydrodynamic interaction is not taken into account. It is found that for this model there will be recoil after the cessation of steady shearing flow. The ultimate shear recovery S _∞ is developed as a power series in κ^?, the shear rate prior to the cessation of the steady shear flow: $$S_\infty = (\theta _0 /2\eta _0 ) \kappa ^\user1{ - } + O(\kappa ^\user1{ - } )^3$$ where η₀ and θ₀ values of the viscosity and primary normal stress functions respectively at zero-shear rate. The coefficient of the term in (κ^?)³ is calculated. In addition, the behavior of the normal stresses during the recoil process is found; during recoil τ₂₂?τ₃₃ has the opposite sign from τ₁₁?τ₂₂.     

Strain gages in cryogenic environment

The increasing use of cryogenics in all fields of endeavor necessitates the use of strain gages for stress analysis of structures under extreme temperatures. This has been a continuing program at the McDonnell Douglas Astronautics Co.'s Strain Gage Engineering Laboratory (Huntington Beach facility). Many characteristics of strain gages were investigated, and a majority of the commercial strain gage types were evaluated. Tests results are presented, as well as composite curves, showing the comparison between various types of strain gages.     

Evaluation of three-dimensional stresses in shrink-fit problems by scattered-light photoelasticity

Stresses caused by shrink fits are commonly evaluated by using Lame's solution or by other analytical methods in which it is assumed that the radial stresses on the surface of contact are distributed uniformly, or in some stepwise manner, and that friction forces between the bodies are zero. These assumptions were not necessary in the experimental problem solved. Heretofore, no experimental techniques have been available to check the existing theories on a three-dimensional basis. The stresses which result when a short, hollow, thick-walled cylinder is shrunk over a shaft which is a solid shaft or a thick-walled, hollow shaft were determined. Equipment and techniques using scattered-light three-dimensional photoelasticity with a laser light source were developed and applied.     

A torsional creep apparatus

Summary This paper describes a torsional creep apparatus for the determination of the creep compliance in shear as a function of time. The instrument is suitable for the measurement of compliances below 5·10^–8 m²/N, in the time range between 1 and 10⁵ seconds. Within five minutes and with an accuracy of 1 C, the temperature of the specimen can be adjusted to any value between –175 and –200 C. From the torsional creep measurements can be calculated the dynamic shear modulus and the corresponding damping. The lowest damping, determined in this way, is several times 10^–3.

---

Zusammenfassung Ein Apparat zur Messung des Torsions-Kriechverhaltens wird beschrieben. Das Instrument ist zur Bestimmung von Nachgiebigkeiten kleiner als 5·10^–5 m²/N im Zeitbereich zwischen 1 und 10⁵ Sekunden geeignet. Die Temperatur der Probe läßt sich innerhalb 5 Minuten und mit einer Genauigkeit von 1 C auf jeden Wert zwischen –175 und –200 C einstellen. Aus der gemessenen Kriechfunktion können der dynamische Schubmodul und die dynamische Dämpfung berechnet werden. Eine untere Grenze für die Dämpfung, die man auf diese Weise noch bestimmen kann, ist einige Male 10^–3.

---

---

The work was partly sponsored by the Office of Naval Research, Washington, D. C., under contract number N 62558-3884.     

Magnetohydrodynamic mixed convection in a vertical channel

The problem of combined free and forced convective magnetohydrodynamic flow in a vertical channel is analysed by taking into account the effect of viscous and ohmic dissipations. The channel walls are maintained at equal or at different constant temperatures. The velocity field and the temperature field are obtained analytically by perturbation series method and numerically by finite difference technique. The results are presented for various values of the Brinkman number and the ratio of Grashof number to the Reynolds number for both equal and different wall temperatures. Nusselt number at the walls is determined. It is found that the viscous dissipation enhances the flow reversal in the case of downward flow while it counters the flow in the case of upward flow. It is also found that the analytical and numerical solutions agree very well for small values of ε.     

Experimental visualization of bubble formation from an orifice in microgravity in the presence of electric fields

 The formation of air bubbles injected into a stagnant, isothermal liquid in microgravity through an orifice was studied. The bubbles grew very large in microgravity. They attained a nearly spherical shape and showed pronounced affinity towards coalescence in the absence of electric fields and other perturbations. Under the influence of electric fields, periodic detachment was observed, with bubble sizes larger than in terrestrial conditions. The bubble shape was elongated. After detachment, the bubbles moved away from the electrode at which they formed without coalescing with other bubbles. Experimental data on bubble shape and size at detachment showed good agreement with models. Received: 26 March 2001 / Accepted: 16 August 2001     

Application of Uniform Asymptotics to the Second Painlevé Transcendent

In this work we propose a new method for investigating connection problems for the class of nonlinear second‐order differential equations known as the Painlevé equations. Such problems can be characterized by the question as to how the asymptotic behaviours of solutions are related as the independent variable is allowed to pass towards infinity along different directions in the complex plane. Connection problems have been previously tackled by a variety of methods. Frequently these are based on the ideas of isomonodromic deformation and the matching of WKB solutions. However, the implementation of these methods often tends to be heuristic in nature and so the task of rigorising the process is complicated. The method we propose here develops uniform approximations to solutions. This removes the need to match solutions, is rigorous, and can lead to the solution of connection problems with minimal computational effort. Our method relies on finding uniform approximations of differ ential equations of the generic form as the complex‐valued parameter . The details of the treatment rely heavily on the locations of the zeros of the function F in this limit. If they are isolated, then a uniform approximation to solutions can be derived in terms of Airy functions of suitable argument. On the other hand, if two of the zeros of F coalesce as , then an approximation can be derived in terms of parabolic cylinder functions. In this paper we discuss both cases, but illustrate our technique in action by applying the parabolic cylinder case to the “classical” connection problem associated with the second Painlevé transcendent. Future papers will show how the technique can be applied with very little change to the other Painlevé equations, and to the wider problem of the asymptotic behavio ur of the general solution to any of these equations. (Accepted May 15, 1997)     

Use of caged fluorescent dyes for the study of turbulent passive scalar mixing

The non-intrusive initialization of a flow field with distinct and spatially segregated scalar components represents a significant experimental difficulty. Here a new technique is described which makes possible the non-intrusive initialization of a spatially binary passive scalar field in a laminar or turbulent flow field. This technique uses photoactivatable (caged) fluorescent dyes dissolved in the flow medium. The scalar field within the flow field is tagged or initialized by uncaging the appropriate regions with an ultraviolet excimer laser. Mixing between the tagged and untagged regions is quantified using standard laser induced fluorescence techniques. The method is currently being used to study mixing in a turbulent pipe flow.