A Silver Bite: Crystalline Heterometallic Architectures Based on Ag–π Interactions with a Bis‐Dipyrrin Zinc Helicate

An unprecedented mode of assembly of helical motives and Ag^I ions in the crystalline state is described. The combination of a Zn^II helicate based on a 2,2′‐bisdpm bearing peripheral benzonitrile moieties with AgX salts, leads to the formation of a tetranuclear core containing Ag–π interactions. Depending on the coordinating ability of the X^? anion and the solvents used, the tetranuclear complex self‐assembles into coordination polymers of varying dimensionality. From the sequence of coordination events (Ag–π or Ag–peripheral site), one may envisage two possible construction scenarios. However, the Ag–π as primary event seems reasonable owing to the rather weak binding propensity of the nitrile group and the chelating nature of the π‐clefts.     

液相色谱-串联质谱法测定桃中31种农药残留

取均质后的桃皮或桃肉,在匀浆机上用乙腈提取;加入氯化钠及硫酸镁振荡盐析;取上清液与PSA混匀并离心进行净化。取经滤膜过滤的滤液与水混匀后供液相色谱-串联质谱分析。用Agilent Eclipse plus C18 RRHT色谱柱为分离柱,用含甲酸的5mmol·L-1甲酸铵溶液与乙腈以不同比例的混合液作流动相进行梯度淋洗。质谱测定中采用电喷雾正离子源动态多反应监测模式进行检测。所测31种农药在一定质量分数范围内保持线性关系,方法的检出限(3S/N)在0.04~20μg·kg-1之间,回收率在73.6%~119%之间,测定值的相对标准偏差(n=6)在0.70%~17%之间。     

固相萃取/超高效液相色谱-串联质谱法测定化妆品中12种合成着色剂

建立了固相萃取/超高效液相色谱-串联质谱法(SPE/UPLC-MS/MS)同时测定指甲油、眼影、唇膏等化妆品中12种合成着色剂(酸性紫49、颜料红57、颜料红53∶1、酸性黄36、结晶紫、罗丹明B、分散黄3、颜料橙5、苏丹红Ⅰ、苏丹红Ⅱ、苏丹红Ⅳ和溶剂蓝35)的分析方法。样品用四氢呋喃(THF)、二甲基亚砜(DMSO)和甲醇分步超声波辅助萃取,HLB固相萃取柱净化后,在Acquity UPLC BEH-C18(2.1 mm×50mm,1.7μm)色谱柱上分离,乙腈和0.05%甲酸溶液为流动相梯度洗脱,采用多反应监测(MRM)模式进行检测,基质外标法定量。结果表明:12种着色剂在6 min内均显示较好峰形,其线性范围为0.5~800μg·L-1,相关系数均大于0.99。定量下限(LOQ,S/N10)为1.4~2 000μg·kg-1。在指甲油、眼影和唇膏中分别添加0.025~20 mg·kg-1浓度的着色剂进行加标回收实验,测定回收率为60.8%~118.0%,相对标准偏差(RSD)为2.3%~10.8%。该方法快速、简便、灵敏,适用于油状、粉状及膏状化妆品中禁限用着色剂的定量和确证分析。     

液相色谱-串联质谱法测定人参中申嗪霉素的残留

建立了液相色谱-电喷雾串联质谱测定人参中申嗪霉素残留量的分析方法。人参样品经水浸泡,乙腈提取,分散固相萃取净化,色谱分离后,采用ESI-MS/MS在正离子多反应监测(MRM)模式下进行检测,选择定量离子对为m/z 225.1/179.1,定性离子对为m/z 225.1/125.1,外标法定量。该方法对于人参中申嗪霉素的定量下限为0.01 mg/kg,在0.5~10μg/L质量浓度范围内,峰面积与含量呈良好线性关系,相关系数大于0.99。对人参中申嗪霉素在0.01,0.02,0.10 mg/kg加标水平下的回收率为82%~100%,相对标准偏差均不大于6.8%。结果表明,该方法操作简单、快速,灵敏度和准确度高,可满足人参中申嗪霉素残留量的检测要求。     

高效液相色谱-电喷雾串联质谱法测定畜禽粪便中四环素类抗生素

建立了高效液相色谱-电喷雾串联质谱法(HPLC-MS/MS)测定畜禽粪便中四环素类抗生素的分析方法。样品经甲醇-乙酸-水(体积比6∶3∶1)溶液提取,OASIS HLB小柱净化后,采用Waters Symmetry C18色谱柱(150×3.9mm,5μm)进行分离,以0.3%甲酸水溶液-0.3%甲酸乙腈溶液梯度洗脱,电喷雾正离子模式多反应监测(MRM)模式定量分析。在优化的色谱条件下,四环素、土霉素和金霉素在0.05~1.0mg/L范围内具有良好的线性,其检出限分别为0.025、0.084、0.098mg/kg;样品回收率为80%~103%。实验结果表明,该方法较液相色谱法具有更高的准确性和灵敏度,可满足畜禽粪便中四环素类抗生素残留的检测要求。     

Cross-Link-Functionalized Nanoparticles for Rapid Excretion in Nanotheranostic Applications

Most NIR-IIb fluorophores are nanoparticle-based probes with long retention (≈1 month or longer) in the body. Here, we applied a novel cross-linked coating to functionalize core/shell lead sulfide/cadmium sulfide quantum dots (PbS/CdS QDs) emitting at ≈1600 nm. The coating was comprised of an amphiphilic polymer followed by three crosslinked amphiphilic polymeric layers (P³ coating), imparting high biocompatibility and >90 % excretion of QDs within 2 weeks of intravenous administration. The P³-QDs were conjugated to an engineered anti-CD8 diabody (Cys-diabody) for in vivo molecular imaging of CD8+ cytotoxic T lymphocytes (CTLs) in response to anti-PD-L1 therapy. Two-plex molecular imaging in combination with down-conversion Er nanoparticles (ErNPs) was performed for real-time in vivo monitoring of PD-L1 positive tumor cells and CTLs with cellular resolution by non-invasive NIR-IIb light sheet microscopy. Imaging of angiogenesis in the tumor microenvironment and of lymph nodes deep in the body with a signal-to-background ratio of up to ≈170 was also achieved using P³-QDs.     

焙烧温度对1,4-丁烯二醇加氢Cu/Raney-Ni催化剂结构和性能影响

在Ni-Al合金粉上浸渍硝酸铜溶液,经不同温度焙烧得到Cu改性Ni-Al合金粉,采用质量分数10%NaOH溶液浸渍上述改性合金粉得Cu/Raney-Ni催化剂。采用EDX、XRD、N_2吸附-脱附、TEM和NH_3-TPD等手段表征了Ni-Al合金粉及相应Raney-Ni催化剂的元素含量、晶体结构、孔结构特征、表面形貌和表面酸碱性,并以1,4-丁烯二醇加氢制1,4-丁二醇为探针反应,考察了焙烧温度对Raney-Ni催化剂加氢性能的影响。表征分析表明,焙烧温度500℃所制备的CRT500催化剂比表面积较大,为64.96m~2/g;弱酸中心比例较高,达81.2%。结果表明,焙烧温度升高,BED可实现完全转化,BDO选择性和收率均先升高后降低。其中,CRT500加氢性能较好,BED转化率为100.00%,BDO选择性为61.88%。进一步升高焙烧温度,催化剂RCT550和RCT600的BDO选择性和收率反而降低,这是由于高温下催化剂易发生团聚或烧结。结合催化剂表征可知,CRT500具有较好的加氢性能,这与该催化剂具有合适的Ni/Al物质的量比(3.84)、弱酸中心所占比例较大和活性组分Ni分散性好等因素有较大关联。     

Versatile post-functionalisation strategy for the formation of modular organic–inorganic polyoxometalate hybrids

Hybrid structures incorporating different organic and inorganic constituents are emerging as a very promising class of materials since they synergistically combine the complementary and diverse properties of the individual components. Hybrid materials based on polyoxometalate clusters (POMs) are particularly interesting due to their versatile catalytic, redox, electronic, and magnetic properties, yet the controlled incorporation of different clusters into a hybrid structure is challenging and has been scarcely reported. Herein we propose a novel and general strategy for combining multiple types of metal-oxo clusters in a single hybrid molecule. Two novel hybrid POM structures (HPOMs) bis-functionalised with dipentaerythritol (R–POM₁–R; R = (OCH₂)₃CCH₂OCH₂C(CH₂OH)) were synthesised as building-blocks for the formation of heterometallic hybrid triads (POM₂–R–POM₁–R–POM₂). Such a modular approach resulted in the formation of four novel heterometallic hybrids combing the Lindqvist {V₆}, Anderson–Evans {XMo₆} (X = Cr or Al) and trisubstituted Wells–Dawson {P₂V₃W₁₅} POM structures. Their formation was confirmed by multinuclear Nuclear Magnetic Resonance (NMR), infrared (IR) and UV-Vis spectroscopy, as well as Mass Spectrometry, Diffusion Ordered Spectroscopy (DOSY) and elemental analysis. The thermal stability of the hybrids was also examined by Thermogravimetric Analysis (TGA), which showed that the HPOM triads exhibit higher thermal stability than comparable hybrid structures containing only one type of POM. The one-pot synthesis of these novel compounds was achieved in high yields in aqueous and organic media under simple reflux conditions, without the need of any additives, and could be translated to create other hybrid materials based on a variety of metal-oxo cluster building-blocks.

A versatile modular approach has been developed for incorporating different metal-oxo nanoclusters with characteristic structures into a single hybrid molecule by covalently linking them with polyol ligands.     

4,5-二溴邻硝基苯基荧光酮与镧(Ⅲ)显色反应研究与应用

研究了在表面活性剂吐温-80存在下,镧(Ⅲ)与4,5-二溴邻硝基苯基荧光酮(DBONPF)的高灵敏显色反应,并建立了测定镧(Ⅲ)的新方法。实验发现,在pH=10.3 NH4Cl-NH3缓冲溶液中,镧(Ⅲ)与4,5-二溴邻硝基苯基荧光酮形成紫色络合物,络合物的最大吸收波长为594.0 nm,表观摩尔吸光系数ε=2.31×105L.mol-1.cm-1。镧(Ⅲ)的浓度在0~35μg/25mL的范围内符合比耳定律。本法用于铜合金试样中微量镧的测定,结果令人满意。