Synthesis and Optical Properties of SiO2-Coated CeO2 Nanoparticles

Silica (SiO₂)-coated ceria (CeO₂) nanoparticles were prepared using water-in-oil microemulsion. Polyoxyethylene (15) cetylether and cyclohexane were used as a surfactant and organic solvent. SiO₂-coated CeO₂ nanoparticles were obtained by hydrolysis of metal alkoxide (tetraethylorthosilicate, TEOS) in the solution containing CeO₂ precursor nanoparticles. The effects of CeO₂ sources (Ce metal salt) and CeO₂ particle-forming agents on the morphology of SiO₂–CeO₂ particles were investigated. Observation via transmission electron microscopy revealed that the type of particle-forming agent affected the nanoparticles' morphology and that CeO₂ nanoparticles were spherically coated with SiO₂ when using oxalic acid ((COOH)₂) as a particle-forming agent of CeO₂. Furthermore, the transmittance of the particles was high in the visible region (above 400 nm) and decreased in the ultraviolet region.     

Optical circuit design based on a wavefront-matching method

We propose an optical circuit design method for coherent waves as a boundary value problem. The method produces a very compact circuit in which the refractive index pattern is automatically synthesized for given input and output fields with a numerical calculation. We employ the method to design a 1.3/1.55 microm wavelength demultiplexer and also describe the features of a circuit generated by use of the method.     

Thermal phase transition of RbMnFe(CN)6 observed by X-ray emission and absorption spectroscopy

The thermal phase transition of RbMnFe(CN)₆ has been observed by Mn and Fe 3p-1s X-ray emission spectroscopy (XES) and 1s X-ray absorption spectroscopy (XAS). The thermal variations of the spin states and the valences of Mn and Fe were determined to be Mn²⁺(S=5/2)-NC-Fe³⁺(S=1/2) for the high-temperature (HT) phase and Mn³⁺(S=2)-NC-Fe²⁺(S=0) for the low-temperature (LT) phase. These transitions are thus caused by charge transfer between Mn and Fe. The temperature dependences of Mn and Fe 3p-1s XES and 1s XAS were observed as the composition of the spectra of the HT and LT phases. The ratios of the HT component in each spectrum show good agreement with the thermal transition curves observed with magnetic susceptibility measurements.     

A miniaturized adaptive microphone array under directional constraint utilizing aggregated microphones

This paper introduces a miniaturized microphone array using the Directionally Constrained Minimization of Power (DCMP) method, which utilizes the transfer functions of microphones located at the same place, namely aggregated microphones. The phased microphone array realizes a noise reduction and direction of arrival (DOA) estimation system according to differences in the arrival time, phase shift, and/or the level of the sound wave for each microphone. Hence it is difficult to miniaturize the microphone array. The objective of our research is to miniaturize the system size using aggregated microphones. In this paper, we first show that the phased microphone array system and the proposed aggregated microphone system can be described within the same framework. We then apply a microphone array under directional constraint to the aggregated microphones and compare the proposed method with the microphone array. We show the directional pattern of the aggregated microphones. We also show the experimental results regarding DOA estimation.     

Widely tunable terahertz-wave generation using an N-benzyl-2-methyl-4-nitroaniline crystal

Widely tunable terahertz (THz)-wave generation using difference frequency generation (DFG) in an organic N-benzyl-2-methyl-4-nitroaniline (BNA) crystal was demonstrated. To our knowledge, this is the first report of THz-wave generation by BNA DFG. Large, high-quality single crystals of BNA (phi 8 mm x 30 mm) were grown using the vertical Bridgman method. The nonlinear optical (NLO) coefficient d(33) of the BNA crystal is approximately 234 pm/V, which is the largest value reported for any yellow NLO material. The collinear phase-matching condition of the type-0 configuration is satisfied using a 0.7-1 microm band pump wavelength. We generated THz waves using an organic BNA crystal; the generation range is 0.1-15 THz.     

Formulation for XPS spectral change of oxides by ion bombardment as a function of sputtering time

XPS measurement revealed that the original state of TiO₂ was changed to Ti₂O₃ and TiO by ion bombardment. TiO₂ decreased and Ti₂O₃ increased at the initial stage. TiO increased at a later stage than Ti₂O₃. Each of them saturated after enough sputtering time.A formulation was proposed in order to explain the change of XPS spectra for oxides as a function of ion sputtering time. This formulation was based on reaction equations that contain two reduction processes (from TiO₂ to Ti₂O₃ and from Ti₂O₃ to TiO), and sputtering effects. Using four fitting parameters (two reduction coefficients, sputtering yield and information depth), the present formula was fitted to the experimental results. The fitting results agree satisfactorily with the experimental results. The calculation shows that the reduction coefficient from TiO₂ to Ti₂O₃ is about ten times larger than that from Ti₂O₃ to TiO. This calculation predicts that surface composition of an oxide that is changed by ion bombardment will reach a different value depending on its bulk composition. Moreover, the present formulation can determine the chemical states of compounds changed by ion bombardment.     

Evidence for a novel state of superconductivity in noncentrosymmetric CePt3Si: a 195Pt-NMR study

We report on novel antiferromagnetic (AFM) and superconducting (SC) properties of noncentrosymmetric CePt3Si through measurements of the 195Pt nuclear spin-lattice relaxation rate 1/T(1). In the normal state, the temperature (T) dependence of 1/T(1) unraveled the existence of low-lying levels in crystal-electric-field multiplets and the formation of a heavy-fermion (HF) state. The coexistence of AFM and SC phases that emerge at T(N)=2.2 K and T(c)=0.75 K, respectively, takes place on a microscopic level. CePt3Si is the first HF superconductor that reveals a peak in 1/T(1) just below T(c) and, additionally, does not follow the T3 law that used to be reported for most unconventional HF superconductors. We remark that this unexpected SC characteristic may be related to the lack of an inversion center in its crystal structure.     

Polymer electrolytes plasticized with hyperbranched polymer for lithium polymer batteries

Hyperbranched polymers (HBPs) with different terminal groups and different ethylene oxide (EO) chain lengths were prepared, and the influence of the HBP structures including molecular weights and molecular weight distribution on the ionic conductivity and the mechanical property of the composite polymer electrolytes composed of poly (ethylene oxide) (PEO), HBP, BaTiO₃ as a ceramic filler, and LiN(CF₃SO₂)₂ as a lithium salt were investigated. It was found that the molecular weights of the HBP do not affect significantly the ionic conductivity, but the molecular weight distribution might affect it, and also further branching at the terminals of the HBP led to a decrease in the ionic conductivity. The HBP with longer EO chain length was effective for enhancement of the ionic conductivity in comparison with the HBP with shorter one. The increase in cross-linkable groups (acryloyl group) at the terminals of the HBP improved the tensile strength, but caused the ionic conductivity to decrease. Loosely cross-linked composite polymer electrolyte showed higher ionic conductivity and higher tensile strength than no cross-linked one. Paper presented at the Patras Conference on Solid State Ionics — Transport Properties, Patras, Greece, Sept. 14 – 18, 2004.     

Noise reduction combining time-domain epsilon-filter and time-frequency epsilon-filter

A time-domain epsilon-filter (TD epsilon-filter) is a nonlinear filter that can reduce noise while preserving a signal that varies drastically, such as a speech signal. Although the filter design is simple, it can effectively reduce noise. It is applicable not only to stationary noise but also to nonstationary noise. It cannot, however, be applied when the amplitude of noise is relatively large. This paper introduces an advanced method for noise reduction that applies an epsilon-filter to complex spectra, namely a time-frequency epsilon-filter (TF epsilon-filter). This paper also introduces noise reduction combining a TD epsilon-filter and a TF epsilon-filter. An advanced method called a variable time-frequency epsilon-filter is also proposed. First, the algorithm of the TD epsilon-filter is explained to clarify the problem. Then, the algorithms of the proposed methods are explained. By utilizing an epsilon-filter in the frequency domain, the proposed method can reduce not only noise that has a relatively small amplitude but also noise that has a relatively large amplitude. Experimental results are also given to demonstrate the performance of the proposed methods in comparison to the results of some conventional methods.