Issues on nanoimprint lithography with a single-layer resist structure

We summarize our key developments in nanoimprint lithography (NIL) that employs a single layer resist lift-off process: lowering of the imprint temperature (for thermal imprint) and pressure, achieving uniform resist thickness and low residual resist layer thickness in the trenches, and eliminating metal ‘rabbit ears’ for the single-layer lift-off. In thermal NIL, our requirements for lower operating temperature and pressure motivated us to develop an alternative resist that is a viscous fluid at room temperature and cures at a lower temperature of 70 °C than the operating temperature of the conventional thermal NIL (≈200 °C). For UV NIL, we devised a method to dispense the resist onto a hydrophobic mold and use the hydrophilic substrate surface to spread the resist via surface wetting to engineer a continuous and uniform film. We also explored the use of Si(110) substrates as molds to produce features with perfectly vertical side walls, and the use of aqua regia to directly etch away rabbit ears. PACS 86.65.+h; 81.16.Nd; 81.16.Rf     

Effect of ion velocity on SHI-induced mixing in Ti/Bi system

Energetic ion beams are proving to be versatile tools for modification and depth profiling of materials. The energy and ion species are the deciding factor in the ion-beam-induced materials modification. Among the various parameters such as electronic energy loss, fluence and heat of mixing, velocity of the ions used for irradiation plays an important role in mixing at the interface. The present study is carried out to find the effect of the velocity of swift heavy ions on interface mixing of a Ti/Bi bilayer system. Ti/Bi/C was deposited on Si substrate at room temperature by an electron gun in a high-vacuum deposition system. Carbon layer is deposited on top to avoid oxidation of the samples. Eighty mega electron volts Au ions and 100?MeV Ag ions with same value of S_e for Ti are used for the irradiation of samples at the fluences 1?×?10¹³–1?×?10¹⁴ ions/cm². Different techniques like Rutherford backscattering spectroscopy, atomic force microscopy and grazing incidence X-ray diffraction were used to characterize the pristine and irradiated samples. The mixing effect is explained in the framework of the thermal spike model. It has been found that the mixing rate is higher for low-velocity Au ions in comparison to high-velocity Ag ions. The result could be explained as due to less energy deposition in thermal spike by high-velocity ions.     

Organic/inorganic interfaced field-effect transistor properties with a novel organic semiconducting material

A novel 1,3,4-oxadiazole-substituted benzo[b]triphenylene was synthesized by three-step synthetic procedure and OFET device design was successfully designed after theoretical calculations made using Gaussian software. For investigating the field-effect properties of designed organic electronic device, a SiO₂ (300 nm) was thermally grown on p-Si wafer at 1000 °C as a dielectric layer and gate, source and drain contacts have been deposited using Au metal with physical vapour deposition. 1,3,4-Oxadiazole-substituted benzo[b]triphenylene was spin coated on the source and drain electrodes of our device, forming organic/inorganic interfaced field-effect transistors. Surface morphology and thin film properties were investigated using AFM. All electrical measurements were done in air ambient. The device showed a typical p-type channel behaviour with increasing negative gate bias voltage values. Our results have surprisingly shown that the saturation regime of this device has high mobility (μ_FET), excellent on/off ratio (I_on/I_off), high transconductance (g_m) and a small threshold voltage (V_Th). The values of μ_FET, I_on/I_off, g_m and V_Th were found as 5.02 cm²/Vs, 0.7 × 10³, 5.64 μS/mm and 1.37 V, respectively. These values show that our novel organic material could be a potential candidate for organic electronic device applications in the future.     

Emergence of power-law in a market with mixed models

We investigate the problem of wealth distribution from the viewpoint of asset exchange. Robust nature of Pareto's law across economies, ideologies and nations suggests that this could be an outcome of trading strategies. However, the simple asset exchange models fail to reproduce this feature. A Yardsale (YS) model in which amount put on the bet is a fraction of minimum of the two players leads to condensation of wealth in hands of some agent while theft and fraud (TF) model in which the amount to be exchanged is a fraction of loser's wealth leads to an exponential distribution of wealth. We show that if we allow few agents to follow a different model than others, i.e., there are some agents following TF model while rest follow YS model, it leads to distribution with power-law tails. Similar effect is observed when one carries out transactions for a fraction of one's wealth using TF model and for the rest YS model is used. We also observe a power-law tail in wealth distribution if we allow the agents to follow either of the models with some probability.     

Signals of left-right supersymmetry ine + e − collisions

We study chargino and neutralino pair production at the Next Linear e⁺ e⁻ Collider in a supersymmetric left-right model. We investigateon- and off-resonance signals via the processes: and . These reactions could lead to observable signals as they compare with the background signal from W^± -pair production.     

The influence of heat transfer in an MHD second grade fluid film over an unsteady stretching sheet

The flow and heat transfer problem of a second grade fluid film over an unsteady stretching sheet is considered. The fluid is incompressible and electrically conducting in the presence of a uniform applied magnetic field. The series solutions of the governing boundary value problems are obtained by employing homotopy analysis method (HAM). The convergence of the developed solutions is discussed explicitly. The dependence of velocity and temperature profiles on various parameters is shown and discussed through graphs. The values of skin-friction coefficient, Nusselt number and free surface temperature are given in tabular form for various emerging parameters.     

Tracing Bose�CEinstein condensate effects in a recurrence tracking microscope

The recurrence tracking microscope for probing nanostructures on a surface is based on the quantum recurrence phenomenon. We report that condensed atoms bouncing off on the atomic mirror, connected to a cantilever, modify the quantum recurrences. The times at which the recurrences occur depend on the initial energy of the bouncing condensates above the atomic mirror, which change with the density of condensed atoms.     

Ultra-smooth platinum surfaces for nanoscale devices fabricated using chemical mechanical polishing

A technique involving two steps of chemical mechanical polishing (CMP) has been developed to produce ultra-smooth metal surfaces with an RMS roughness better than 0.1 nm. A figure of merit termed degree of smoothness (DOS) is proposed for the purpose of quantifying the extent of smoothness of a polished metal surface. A post CMP metal slurry cleaning solution was used for cleaning Pt slurry for the first time and by applying special techniques, a very high quality clean surface was attained. Applications of the polished Pt electrodes in interfacing molecular switching devices with self-assembled monolayers of molecules have been found to dramatically improve the packing and orientation of the molecular monolayer with a huge improvement in the molecular electronics device yields. These smooth metal surfaces may open doors for new opportunities in future nanoscale devices. PACS 81.05.Bx; 81.16.Rf; 81.65.Ps     

New sensitive spectrophotometric method for the determination of clomipramine-HCl in pure form and pharmaceutical preparations

A simple, rapid and sensitive spectrophotometric method for the assay of clomipramine-HCl is described. It has been found that clomipramine-HCl reacts with ammonium molybdate in acetic medium to give blue color product exhibiting maximum absorbance at 712 nm. The reaction is selective for clomipramine-HCl with 1 μg/mL as visual limit of detection. It provides a basis for a sensitive spectrophotometric method for the determination of clomipramine-HCl. The method obeys Beer’s Law from 0.001 to 0.250 mg/mL. The standard deviation does not exceed 0.005 mg/mL. The method has been successfully applied to the determination of clomipramine-HCl in pure form and pharmaceutical preparations. The quantitative assessment of tolerable amounts of possible interferants was also studied. The results are reproduced within ±1% and are in good agreement with those obtained by the standard procedure.