Mn, Cr-co-doped MgAl2O4 phosphors for white LEDs

The Mn-, Cr-doped and Mn, Cr-co-doped MgAl₂O₄ powders have been synthesized via a gel-solid reaction method. Energy transfer from Mn²⁺ to Cr³⁺ has been observed for the first time in the co-doped MgAl₂O₄ phosphors. When excited with blue light with a wavelength of 450 nm at room temperature, both green emission from Mn²⁺ around 520 nm and red emission from Cr³⁺ around 675and 693 nm were generated. Moreover, the color of the emission can be modified by controlling the doping concentrations of Mn²⁺ and Cr³⁺. Therefore, MgAl₂O₄: Mn²⁺, Cr³⁺ could be used as a single-phased phosphor for white LED with a blue LED chip. The energy transfer in terms of Mn²⁺ to Cr³⁺ is determined by means of radiation and reabsorption.     

X波段2维金属光子晶体的加速结构

 光子晶体加速结构能够有效地阻尼高频率加速管中的尾场,对高能加速器中因尾场引起的束流不稳定性起到抑制作用。探索了X波段2维金属光子晶体微波加速结构的研制方法,用机械加工的方式制作了较高品质因数的2维光子晶体结构谐振腔。理论计算表明,在光子晶体结构谐振腔外围放置吸波材料,可有效地吸收加速结构中的类TM11偶极模等高次模,而对加速主模类TM01模影响较小。设计和制作了工作频率为11.42 GHz,由4个腔构成的X波段2维金属光子晶体行波加速器,实验结果与数值模拟计算值吻合较好。     

聚酰亚胺薄膜表面粗糙度的影响因素

 采用热蒸发气相沉积聚合方法（VDP）制备了聚酰亚胺(PI)薄膜,研究了设备、衬底温度、升温过程和单体配比因素对PI薄膜表面形貌的影响。利用干涉显微镜和扫描电镜对薄膜表面形貌进行了分析;利用原子力显微镜测定了薄膜表面粗糙度。结果表明：设定蒸发源-衬底距离为74 cm时可成连续膜;蒸发源采用一段升温和多段升温时,膜表面均方根粗糙度分别为291.23 nm和61.99 nm;采用细筛网可防止原料的喷溅;均苯四甲酸二酐和4,4′-二氨基二苯醚（PMDA和ODA）单体沉积速率比值为0.9∶1时,膜表面均方根粗糙度值可减小至3.30 nm;沉积衬底温度保持30 ℃左右时,膜表面均方根粗糙度为4.01 nm, 随温度的上升,膜表面质量会逐渐变差。     

New construction of hybrid and aperiodic ordered PBG cavity

The band gap of a photonic crystal (PhC) cavity intrinsically avoids HOM problems. In this paper, we present a new PBG structure based on the possible advantage of using hybrid structures and aperiodic lattices. This novel hybrid and aperiodically ordered cavity was designed for apparently higher Q-factor (more than 10300) and achieving large accelerating field gradient. The HOMs in the cavity are able to be absorbed efficiently.     

Synthesis, characterization, and controlled aggregation of biotemplated polystyrene nanodisks

Cross-linked polystyrene nanodisks were prepared by controlled polymerization of styrene and divinylbenzene in the interior of bicelles, discoidal lipid aggregates. Aggregation behavior of polymer nanodisks was studied in water, organic solvents, and solid phase. Nanodisks form stable dispersions in aqueous solutions of surfactants, such as sodium dodecyl sulfate (SDS). Varying SDS/nanodisk ratio allowed us to control the size of nanodisk aggregates. Nanodisks are readily solubilized in nonpolar organic solvents, such as toluene and carbon tetrachloride, to yield stable monodisperse suspensions. These findings open opportunities for creating nanodisk-based nanocomposite materials. Stable nanodisk suspension in toluene enabled small angle neutron scattering (SANS) measurements. SANS data confirmed the nanodisk diameter and allowed accurate measurement of nanodisk thickness (19.5 ± 1.0 Å). In solid phase, nanodisks aggregate in sub-micron platelets.     

Microwave synthesis and spectroscopic characterization of manganese oxalate nanocrystals

The microwave synthesis of MnC₂O₄·2H₂O nanoparticles was performed through the thermal double decomposition of oxalic acid dihydrate (C₂H₂O₄·2H₂O) and Mn(OAc)₂·4H2O solutions using a CATA-2R microwave reactor. Structural characterization was performed using X-ray diffraction (XRD), particle size and shape were analyzed using transmission electron microscopy (TEM). The chemical in the structures was investigated using electron paramagnetic resonance (EPR) as well as optical absorption spectra and near-infrared (NIR) spectroscopies. The nanocrystals produced with this method were pure and had a distorted rhombic octahedral structure.     

Synthesis of tetrahydroisoquinoline (TIQ)–oxazoline ligands and their application in enantioselective Henry reactions

A novel family of eleven new tetrahydroisoquinoline (TIQ)–oxazoline intermediates and five corresponding copper(II) catalysts has been developed and applied to the catalytic asymmetric Henry reaction of various aldehydes with nitromethane to provide β-hydroxy nitroalkanes in high conversion (>99%). This paper describes the synthesis of the TIQ compounds from l-dihydroxyphenylalanine (l-DOPA) as the starting material. The chiral ligands were complexed in situ with various transition metals such as Cu, Sc, Co, Zn, Ni and Mn and tested as a chiral catalyst for the Henry reaction. The reaction was optimized in terms of the metal, counter ion, solvent, temperature and over a range of substrates. The corresponding catalyst with copper(II) acetate and 2-propanol as the solvent provides the best enantioselectivities (up to 77% ee) of the corresponding nitroalcohol for 4-chlorobenzaldehyde.     

Synthesis of tetrahydroisoquinoline-diamine ligands and their application in asymmetric transfer hydrogenation

The use of the tetrahydroisoquinoline scaffold is well documented in biologically active compounds. However, reports of the utilisation of tetrahydroisoquinoline compounds in asymmetric catalysis are limited. The synthesis of novel diamine ligands possessing the tetrahydroisoquinoline (tetrahydroisoquinoline) backbone and evaluation of their activity in the asymmetric transfer hydrogenation of acetophenone are presented. The diamine ligands in conjunction with i-PrOH as the hydrogen source and [RhCl₂(Cp1)]₂ as the metal precursor proved to be the most effective of the tetrahydroisoquinoline derivatives for this catalytic system. Water was found to have a profound influence on the enantioselectivity of the reaction. Optimisation of the amount water, i-PrOH and catalytic loading content rendered the best result of 70% enantioselectivity for the (S)-1-phenylethanol isomer product.     

Investigations of the effects of ultrasound on some metal and nonmetal systems

The effects of power ultrasound on four metal-nonmetal powdered systems: copper-sulphur iron-sulphur, zinc-sulphur and magnesium-sulphur in various solvents, such as hexane and carbon disulphide, are briefly examined here. For each system, a sonication time of 30 min was affected. The sonicated products are analysed by X-ray diffraction, X-ray fluorescence and atomic absorption spectrophotometry to determine their qualitative and quantitative compositions and the percentage yields of the products obtained are then compared and discussed.     

邻菲咯啉荧光熄灭法测定铜

研究了在pH 6 2 5～ 7 5 5KH2 PO4 Na2 HPO4 缓冲介质中 ,铜与邻菲咯啉形成配合物而使荧光熄灭的实验条件 ,建立了荧光熄灭法测定微量铜的新方法。该方法的λex =2 6 6nm ,λem =36 8nm ,铜含量在 8～ 30 0ng·mL- 1 范围内 ,有良好的线性关系 ,相关系数r=0 9996 ,检出下限为 10 4ng·mL- 1 。用本法经巯基棉分离测定了环境水样中的微量铜。