A comparative study on textural characterization: cation-exchange and sorption properties of crystalline alpha-zirconium(IV), tin(IV), and titanium(IV) phosphates

Tetravalent metal phosphates (M=Zr, Ti, and Sn) were prepared and characterized by XRD, surface properties, and TG-DTA. The cation exchange and sorption behavior of these metal phosphates toward transition metal ions such as Cu(2+), Co(2+), and Ni(2+) have been studied comparatively as a function of temperature and concentration. The adsorption process was found to increases with increase in temperature and concentration. The selectivity order for alpha-titanium and alpha-tin phosphates is Cu(2+)>Co(2+)>Ni(2+), whereas for alpha-zirconium phosphate it is Cu(2+)>Ni(2+)>Co(2+). The ion exchange capacity of alpha-titanium phosphate is greater than those of other phosphates, which is explained on the basis of the surface behavior, disorderness of the system, degree of hydrolysis of incoming guest adsorbate metal ions, and structural steric hindrance of the exchangers during adsorption and sorption. The distribution coefficient, Gibbs free energy, enthalpy, and entropy values indicate that the ion-exchange processes are spontaneous.     

Synthesis and applications of a novel supramolecular polymer network with multiple H‐bonded melamine pendants and uracil crosslinkers

A conjugated main‐chain copolymer ( PBT ) consisting of bithiazole, dithieno[3,2‐b:2′,3′‐d]pyrroles (DTP), and pendent melamine units was synthesized by Stille polymerization, which can be hydrogen‐bonded (H‐bonded) with proper molar amounts of bi‐functional π‐conjugated crosslinker F (i.e., two uracil motifs covalently attached to a fluorene core through triple bonds symmetrically) to develop a novel supramolecular polymer network ( PBT/F ). The effects of multiple H‐bonds on light harvesting capabilities, HOMO levels, and photovoltaic properties of polymer PBT and H‐bonded polymer network PBT/F are investigated. The formation of supramolecular polymer network ( PBT/F ) between PBT and F was confirmed by FTIR and XRD measurements. Because of the stronger light absorption, lower HOMO level, and higher crystallinity of H‐bonded polymer network PBT/F , the solar cell device containing PBT/F showed better photovoltaic properties than that containing polymer PBT . The preliminary results show that the solar cell device containing 1:1 weight ratio of PBT/F and [6,6]‐phenyl C₇₁ butyric acid methyl ester (PC₇₁BM) offers the best power conversion efficiency (PCE) value of 0.86% with a short‐circuit current density (J_sc) of 4.97 mA/cm², an open circuit voltage (V_oc) of 0.55 V, and a fill factor (FF) of 31.5%. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

SH-waves in viscoelastic heterogeneous layer over half-space with self-weight

The effect of gravity, heterogeneity and internal friction on propagation of SH-waves (horizontally polarised shear waves) in viscoelastic layer over a half-space has been studied. Using the method of separation of variables, dispersion equation has been obtained and used to recover the damped velocity of SH-waves. Both the real and imaginary parts of dispersion equation are in well agreement with the classical Love wave equation. It has been observed that heterogeneity of the medium affects the velocity profile of SH-wave significantly. Some other peculiarities have been observed and discussed in our study.     

Spectroscopic techniques in medicine: The future of diagnostics

Spectroscopic techniques have been finding increasing applications in the field of biomedicine especially in the field of disease diagnosis and monitoring in spite of the rapid emergence of several molecular biology based techniques. The significance of spectroscopy techniques and the possibility of using some of the underutilized regions of the electromagnetic radiations are discussed in this review. While previous reviews have already dealt with the potential of Fourier transform infrared spectroscopy-based (FTIR) techniques for clinical applications, the present review addresses the lacunae of the techniques along with its future trends that may make it a technique routinely applied in clinical settings.     

Task-specific ionic liquid tetraalkylammonium hydrogen phthalate as an extractant for U(VI) extraction from aqueous media

In this paper a quaternary ammonium based room temperature ionic liquid (IL) trioctylmethylammonium hydrogen phthalate has been reported as promising extractant for separation of U(VI) from other metal ions from aqueous media. The IL was synthesized via metathesis route and characterized using various techniques such as hydrogen nuclear magnetic resonance, electron spray ionization mass spectrometry and infra red etc. The newly synthesized IL was evaluated for extraction of U(VI), Th(IV), La(III), Y(III), Nd(III) and Fe(III) from aqueous solutions and follow the order: U(VI) > Th(IV) > Fe(III) > Y(III) >> Nd(III) ~ La(III).     

Simultaneous bioanalysis and pharmacokinetic interaction study of acebrophylline,levocetirizine and pranlukast in Sprague–Dawley rats

The combination of acebrophylline (ABP), levocetirizine (LCZ) and pranlukast (PRN) is used to treat allergic rhinitis, asthma, hay‐fever and other conditions where patients experience difficulty in breathing. This study was carried out with the aim of developing and validating a reverse‐phase high‐performance liquid chromatographic bioanalytical method to simultaneously quantitate ABP, LCZ and PRN in rat plasma. The objective also includes determination of the pharmacokinetic interaction of these three drugs after administration via the oral route after individual and combination treatment in rat. Optimum resolution between the analytes was observed with a C₁₈ Kinetex column (250 mm × 4.6 mm × 5 μm). The chromatography was performed in a gradient elution mode with a 1 mL/min flow rate. The calibration curves were linear over the concentration range of 100–1600 ng/mL. The intra‐ and inter‐day precision and accuracy were found to be within acceptable limits as specified in US Food and Drug Administration guideline for bioanalytical method validation. The analytes were stable on the bench‐top (8 h), after three freeze–thaw cycles, in the autosampler (8 h) and as a dry extract (?80°C for 48 h). The statistical results of the pharmacokinetic study in Sprague–Dawley rats showed a significant change in pharmacokinetic parameters for PRN upon co‐administration of the three drugs.     

Recovery of plutonium and cerium from alumina crucible

Journal of Radioanalytical and Nuclear Chemistry - Plutonium recovery is inevitable from plutonium bearing alumina crucibles generated over the years as part of carbon analysis during chemical...     

Coexistence and harvesting control policy in a food chain model with mutual defense of prey

A model is proposed to understand the dynamics in a food chain (one predator‐two prey). Unlike many approaches, we consider mutualism (for defense against predators) between the two groups of prey. We investigate the conditions for coexistence and exclusion. Unlike Elettreby's (2009) results, we show that prey can coexist in the absence of predators (as expected since there is no competition between prey). We also show the existence of Hopf bifurcation and limit cycle in the model, and numerically present bifurcation diagrams in terms of mutualism and harvesting. When the harvest is practiced for profit making, we provide the threshold effort value that determines the profitability of the harvest. We show that there is zero profit when the constant effort is applied. Below (resp. above) , there will always be gain (resp. loss). In the case of gain, we provide the optimal effort and optimal steady states that produce maximum profit and ensure coexistence. Recommendations for resource managers As a result of our investigation, we bring the following to the attention of management:

• 1. In the absence of predators, different groups of prey can coexist if they mutually help each other (no competition among them).
• 2. There is a maximal effort to invest in order to gain profit from the harvest. Above , the investment will result in a loss.
• 3. In the case of profit from harvest, policy makers should recommend the optimal effort to be applied and the optimal stock to harvest. This will guarantee maximum profit while ensuring sustainability of all species.

     

Irreversible Structural Changes of Copper Hexacyanoferrate Used as a Cathode in Zn-Ion Batteries

The structural changes of copper hexacyanoferrate (CuHCF), a Prussian blue analogue, which occur when used as a cathode in an aqueous Zn-ion battery, are investigated using electron microscopy techniques. The evolution of Zn_xCu_1−xHCF phases possessing wire and cubic morphologies from initial CuHCF nanoparticles are monitored after hundreds of cycles. Irreversible introduction of Zn ions to CuHCF is revealed locally using scanning transmission electron microscopy. A substitution mechanism is proposed to explain the increasing Zn content within the cathode material while simultaneously the Cu content is lowered during Zn-ion battery cycling. The present study demonstrates that the irreversible introduction of Zn ions is responsible for the decreasing Zn ion capacity of the CuHCF cathode in high electrolyte concentration.     

An experimental investigation on heat transfer enhancement in circular jet impingement on hot surfaces by using Al2O3/water nano-fluids and aqueous high-alcohol surfactant solution

The present article reports the heat transfer characteristics of a vertical stainless steel foil of 0.15 mm thickness (SS304) by circular impinging jets of various fluids such as pure water, nano-fluids (Al₂O₃-water, ф = 0.15%, 0.6%), and aqueous high-alcohol surfactant (HAS, i.e., 2-ethyl-hexanol, 100–400 ppm) studied using an infrared thermal imaging camera (A655sc, FLIR System). The enhancement in the heat transfer rates for Al₂O₃-water nano-fluids with ф = 0.15%, ф = 0.60%, and aqueous surfactant solution (150ppm) is found to be 140%, 207%, and 117% higher compared to pure water results, respectively. The surface characteristics of the foil after jet impingement by various fluids are also studied using scanning electron microscopy (SEM), energy dispersive spectrometer (EDS), and surface wettability.