Discrete Transforms and Matrix Rotation Based Cancelable Face and Fingerprint Recognition for Biometric Security Applications

The security of information is necessary for the success of any system. So, there is a need to have a robust mechanism to ensure the verification of any person before allowing him to access the stored data. So, for purposes of increasing the security level and privacy of users against attacks, cancelable biometrics can be utilized. The principal objective of cancelable biometrics is to generate new distorted biometric templates to be stored in biometric databases instead of the original ones. This paper presents effective methods based on different discrete transforms, such as Discrete Fourier Transform (DFT), Fractional Fourier Transform (FrFT), Discrete Cosine Transform (DCT), and Discrete Wavelet Transform (DWT), in addition to matrix rotation to generate cancelable biometric templates, in order to meet revocability and prevent the restoration of the original templates from the generated cancelable ones. Rotated versions of the images are generated in either spatial or transform domains and added together to eliminate the ability to recover the original biometric templates. The cancelability performance is evaluated and tested through extensive simulation results for all proposed methods on a different face and fingerprint datasets. Low Equal Error Rate (EER) values with high AROC values reflect the efficiency of the proposed methods, especially those dependent on DCT and DFrFT. Moreover, a comparative study is performed to evaluate the proposed method with all transformations to select the best one from the security perspective. Furthermore, a comparative analysis is carried out to test the performance of the proposed schemes with the existing schemes. The obtained outcomes reveal the efficiency of the proposed cancelable biometric schemes by introducing an average AROC of 0.998, EER of 0.0023, FAR of 0.008, and FRR of 0.003.     

Biologically active 2-thione-4,6-diamino-5-hydroxypyrimidine transition metal complexes

New complexes of 2-thione-4,6-diamino-5-hydroxypyrimidine (HTDAHP) with Fe(III), Ni(II), Ag(I) and Ru (II) are described. IR, ¹H-NMR and mass spectra, conductivity, magnetic and thermal measurements of the complexes are reported and their structures discussed. HTDAHP behaves as a bidentate ligand, forming five membered hydroxyl-amino chelates or four-membered cyclic nitrogen-sulphur chelates without any participation of the pendant amino or hydroxy groups in complexation. The biological activities of the Ag(I) complexes against fungi (Aspergillus niger and Candida albicans) and bacteria (Staphylococcus aureus and Pseudomonas aeruginosa) have been investigated.     

Conductometric and fluorometric studies of sodium dodecyl sulphate in aqueous solution and in the presence of amino acids

The critical micelle concentration (CMC) of sodium dodecyl sulphate (SDS) in pure water and in the presence of amino acids (0.01, 0.02 and 0.03 mol kg^?1), L-valine (Val) and L-leucine (Leu) was determined from conductometric and fluorometric methods using pyrene as luminescence probe. Depression in the CMC at low concentration of amino acids is attributed to the increased hydrophobic–hydrophobic interaction between the non-polar groups of the surfactant, while, at high concentration, amino acids bind strongly with the anion, DS^?, head groups of SDS, thereby, delaying the micelle formation, resulting in increased CMC. A pronounced decrease in the CMC, while a marked increase in λ⁰₊, with decrease in the solvated radius (rather than crystal radius) of the counterions is observed. Negative values of ΔG⁰_m and ΔH⁰_m indicate that micellisation of SDS in the presence of amino acids is thermodynamically spontaneous and exothermic. Highest negative value of ΔH⁰_m in 0.01 m Val, with lowest CMC value, shows that 0.01 m aqueous Val is the most suitable medium favouring the micellisation of SDS. Decrease in I₁/I₃ from Val to Leu confirms the relative hydrophobicity of two amino acids. The observed values of the packing parameter, P, of SDS in water and in aqueous amino acids suggest that micelles formed are spherical in nature.     

First principle study of the electronic and magnetic properties of a single iron atomic chain encapsulated in boron nitrite nanotubes

The electronic and magnetic properties for a single Fe atom chain wrapped in armchair (n,n) boron nitride nanotubes (BNNTs) (4≤n≤6) are investigated through the density functional theory. By increasing the nanotube diameter, the magnetic moments, total magnetic moments and spin polarization of systems are increased. We have calculated the majority and minority density of states (DOS) of armchair BNNT. Our results show that the magnetic moment of the system come mostly from the Fe atom chain. The magnetic moment on an Fe atom, the total magnetic moment and spin polarization decrease by increasing the axial separation of the Fe atom chain for the system. The BNNT can be used in the magnetic nanodevices because of higher magnetic moment and spin polarization.     

Development of a Novel Electrochemical Sensor Based on Gold Nanoparticle-Modified Carbon-Paste Electrode for the Detection of Congo Red Dye

In this study, gold nanoparticles (AuNPs) were electrodeposited on samples of a carbon-paste electrode (CPE) with different thicknesses. The prepared AuNPs were characterized using different analysis techniques, such as FTIR, UV–Vis, SEM, EDX, TEM images, and XRD analysis. The fabricated modified electrode AuNPs/CPE was used for the sensitive detection of Congo red (CR) dye. Electrochemical sensing was conducted using square-wave voltammetry (SWV) in a 0.1 M acetate buffer solution at pH 6.5. The proposed sensor exhibited high efficiency for the electrochemical determination of CR dye with high selectivity and sensitivity and a low detection limit of 0.07 μM in the concentration range of 1–30 μM and 0.7 μM in the concentration range of 50–200 μM. The practical application of the AuNPs/CPE was verified by detecting CR dye in various real samples involving jelly, candy, wastewater, and tap water. The calculated recoveries (88–106%) were within the acceptable range.     

Preparation and Some Properties of Lithium Vanadium Bronzes

Lithium vanadium bronzes with composition formula Li_xV₂O₅ (0.04 ≤ × ≤ 0.92) have been prepared by solid‐state reaction at 650 °C in argon atmosphere. The obtained products were characterized by X‐ray powder diffraction and IR spectroscopy. The results reveal that four phases are present in the range from x = 0.04 to 0.92, namely α, β, β′, and γ phase. The magnetic susceptibility for the investigated bronzes was measured using the conventional Gouy's method. The values of the effective magnetic moments, as calculated from experimental data, indicate the presence of V⁴⁺ ions in all bronze samples. The electrical conductivity as a function of temperature and lithium content was measured in the temperature range from room temperature to 483 K. The electrical conductivity of the bronzes is found to be affected by lithium content. The values of the electrical conductivity increase with temperature for the prepared samples and both electronic and ionic conduction are discussed.     

Effects of TiO<Subscript>2</Subscript> on the hydrophilicity of сotton/polyester (50/50) blend fabric under UV irradiation

Alkaline TiO₂ nanoparticles treated cotton/polyester (50/50) blend fabric were prepared, and then exposed to UV irradiation. It was found that the addition of a small amount of TiO₂ nanoparticles to the coating solution improves the hydrophilicity and mechanical strength of the fabrics. The treated fabrics exhibited high water absorption as well as better hydrophilicity compared to the untreated sample. Compared to the surface of untreated blend fabric, scanning electron microscopy showed that the surface of the modified blend fabric becomes rough and covered by a layer of other materials. Furthermore, X-ray diffraction demonstrated the formation of crystalline material. In addition, thermograms showed that the modification process improved the thermostability of blend fabric.     

Two-photon reduction: a cost-effective method for fabrication of functional metallic nanostructures

Metallic nanostructures have underpinned plasmonic-based advanced photonic devices in a broad range of research fields over the last decade including physics, engineering, material science and bioscience. The key to realizing functional plasmonic resonances that can manipulate light at the optical frequencies relies on the creation of conductive metallic structures at the nanoscale with low structural defects. Currently, most plasmonic nanostructures are fabricated either by electron beam lithography (EBL) or by focused ion beam (FIB) milling, which are expensive, complicated and time-consuming. In comparison, the direct laser writing (DLW) technique has demonstrated its high spatial resolution and cost-effectiveness in three-dimensional fabrication of micro/nanostructures. Furthermore, the recent breakthroughs in superresolution nanofabrication and parallel writing have significantly advanced the fabrication resolution and throughput of the DLW method and made it one of the promising future nanofabrication technologies with low-cost and scalability. In this review, we provide a comprehensive summary of the state-of-the-art DLW fabrication technology for nanometer scale metallic structures. The fabrication mechanisms, different material choices, fabrication capability, including resolution, conductivity and structure surface smoothness, as well as the characterization methods and achievable devices for different applications are presented. In particular, the development trends of the field and the perspectives for future opportunities and challenges are provided at the end of the review. It has been demonstrated that the quality of the metallic structures fabricated using the DLW method is excellent compared with other methods providing a new and enabling platform for functional nanophotonic device fabrication.     

Gap States of ZnO Thin Films by New Methods:Optical Spectroscopy,Optical Conductivity and Optical Dispersion Energy

The optical reflectance and transmittance spectra in the wavelength range of 300–2500 nm are used to compute the absorption coefficient of zinc oxide films annealed at different post-annealing temperatures 400, 500 and 600°C.The values of the cross point between the curves of the real and imaginary parts of the optical conductivity ɑ_1 and ɑ_1 with energy axis of films exhibit values that correspond to optical gaps and are about 3.25–3.3 eV. The maxima of peaks in plots dR/dλ and dT/dλ versus wavelength of films exhibit optical gaps at about 3.12–3.25 eV.The values of the fundamental indirect band gap obtained from the Tauc model are at about 3.14–3.2 eV. It can be seen that films annealed at 600°C have the minimum indirect optical band gap at about 3.15 eV. The films annealed at 600°C have Urbach's energy minimum of 1.38 eV and hence have minimum disorder. The dispersion energy d of films annealed at 500°C has the minimum value of 43 eV.