Molecular Architecture Manipulation in Free Radical Copolymerization: An Advanced Monte Carlo Approach to Screening Copolymer Chains with Various Comonomer Sequence Arrangements

A Kinetic Monte Carlo (KMC) simulation approach has been adopted in this study to capture evolutionary events in the course of free radical copolymerization, through which batch and starved‐feed semibatch processes are compared. The implementation of the KMC code deve­loped in this work: (i) enables satisfactory control of the molecular weight of the copolymer by tracking the profiles of concentrations of macroradicals, monomers, and polymer as well as degree of polymerization, polydispersity, and chain length distribution; (ii) captures the bivariate distribution of chain length and copolymer composition; (iii) comprehensively tracks and analyzes detailed information on the molecular architecture of the growing chains, thus distinguishing between sequence length and polydispersity of chains produced in batch and starved‐feed semibatch operations; (iv) makes possible the screening of products, based on such details as the number and weight fractions of products having different comonomer units located at various positions along the copolymer chains. The aforementioned characteristics are achieved by stochastic calculations through code developed in‐house. This KMC simulator becomes a very useful tool for the development of tailored copolymers through free radical polymerization, with blocks separated with single units of a different type.

     

Preparation and characterization of NiO nanoparticles from thermal decomposition of the [Ni(en)3](NO3)2 complex: A facile and low-temperature route

NiO nanoparticles with an average size of 15 nm were easily prepared via the thermal decomposition of the tris(ethylenediamine)Ni(II) nitrate complex [Ni(en)₃](NO₃)₂ as a new precursor at low temperature, and the nanoparticles were characterized by thermal analysis (TGA/DTA), X-ray diffraction (XRD), Fourier-transformed infrared spectroscopy (FT-IR), UV-Vis spectroscopy, BET specific surface area measurement, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM) and magnetic measurements. The magnetic measurements confirm that the product shows a ferromagnetic behavior at room temperature, which may be ascribed to a size confinement effect. The NiO nanoparticles prepared by this method could be an appropriate photocatalytic material due to a strong absorption band at 325 nm. This method is simple, fast, safe, low-cost and also suitable for industrial production of high purity NiO nanoparticles for applied purposes.     

NiO nanoparticles prepared via thermal decomposition of the bis(dimethylglyoximato)nickel(II) complex: A novel reusable heterogeneous catalyst for fast and efficient microwave-assisted reduction of nitroarenes with ethanol

NiO nanoparticles with an average size of 12 nm and a high specific surface area of 88.5 m²/g were easily prepared via the thermal decomposition of the complex Ni(dmgH)₂ and were characterized by TGA, XRD, FT-IR, TEM and BET surface area measurement. This nanosized transition metal oxide was used as a new heterogeneous catalyst for the reduction of nitroarenes under microwave irradiation. The efficient and selective reduction of aromatic nitro compounds into their corresponding amines was observed by using ethanol as a hydrogen donor (reducing agent) and KOH as a promoter under microwave irradiation. This highly regio- and chemoselective method is fast, simple, inexpensive, high yielding, clean and compatible with several sensitive functionalities, such as halogens, -OH, -OCH₃, -CHO, -COCH₃, -COOH, -COOEt, -CONH₂, -CN, -CHCH₂ and -NHCOCH₃. This method is suitable for the large scale preparation of different substituted anilines as well as other arylamines. In addition, the catalytic activity of nanosized NiO is higher than that of the bulk sample.     

Spectrophotometric determination of the formation constants of some transition metal cations with a new synthetic Schiff base in dichloromethane and chloroform using rank annihilation factor analysis

The complex formation between a new synthesized Schiff base and the cations Ni²⁺, Co²⁺, Cu²⁺, Zn²⁺ in dichloromethane (DCM) and chloroform solutions was investigated spectrophotometrically using rank annihilation factor analysis (RAFA). The results of mole ratio plots and continuous variation data show the stoichiometry of complexation were found to be 1:1, and 2:1 metal ion to ligand. The stoichiometry was obtained as 1:1 metal ion to ligand ratio for Co²⁺, Ni²⁺ and Zn²⁺ in chloroform and 2:1 for Cu²⁺. In DCM the stoichiometry was obtained as 1:1 for Co²⁺ and 2:1 for Ni²⁺ and Zn²⁺ and a consecutive 2:1 metal ion to ligand ratio was obtained for Cu²⁺. Formation constants of these complexes were estimated by application of RAFA on spectrophotometric data. In this process the contribution of ligand was removed from the absorbance data matrix when the complex stability constant acts as an optimizing object and simply combined with the pure spectrum of the ligand, the rank of the original data matrix can be reduced by one by annihilating the information of the ligand from the original data matrix.     

Catalytic study of the copper-based magnetic nanocatalyst on the aerobic oxidation of alcohols in water

A copper-based magnetic nanocatalyst has been prepared by co-precipitation method and characterized by FESEM, EDS, TEM, XRD, XRF, ICP–OES, FTIR, and BET analysis. This new nanocatalyst displays a good activity toward the aerobic oxidation of a wide range of alcohols in water. Moreover, it is recyclable up to five following runs by simple filtration without any significant loss of its catalytic activity.

     

Reducing Occupational Noise Propagated from Centrifugal Fan through Dissipative Silencers: A Field Study

Acoustic performance of dissipative silencer was evaluated to determine the effectiveness of perforated duct porosity and absorbent material density in reducing occupational noise exposure propagated from centrifugal fan. Design charts were applied to predict noise reduction and length of a dissipative silencer. Dissipative silencers with various punched duct porosity (14%, 30% and 40%) and sound absorbent density (80 Kg/m³, 120 Kg/m³, and 140 Kg/m³) were designed and fabricated. According to ISO9612 and ISO11820, noise level was measured before and after installing all nine test silencers at fixed workstations around the discharge side of a centrifugal fan in a manufacturing plant. On average, the noise level at the discharge side of a fan without silencer was measured to be 93.6 dBA, whereas it was significantly mitigated by 67.4 dBA to 70.1 dBA after installing all silencers. Dynamic insertion loss for a dissipative silencer with 100 cm length was predicted to be 27.9 dB, which was in agreement with experimental ones. Although, there was no significant differences between insertion loss of silencers, the one with 30% porosity and 120 Kg/m³ rock wool density had the highest insertion loss of 26.2 dBA. Dissipative silencers noticeably reduced centrifugal fan noise exposures. Increasing sound absorbent density and duct porosity up to a certain limit could probably be effective in noise reduction of dissipative silencers.     

Compact right multipliers on a Banach algebra related to locally compact semigroups

For a locally compact semigroup \({\mathcal{S}}\), let \(L_{0}^{\infty}({\mathcal{S}},M_{a}({\mathcal{S}}))\) be the Banach space of all μ-measurable (\(\mu\in M_{a}({\mathcal{S}})\)) functions vanishing at infinity, where \(M_{a}({\mathcal{S}})\) denotes the algebra of all measures in the measure algebra \(M({\mathcal{S}})\) of \({\mathcal{S}}\) with continuous translations. Here, we study right compact multipliers on the Banach algebra \(L_{0}^{\infty}({\mathcal{S}},M_{a}({\mathcal{S}}))^{*}\) equipped with an Arens product.     

Synthesis and characterization of two new fluorescent macrocycles: A novel fluorescent chemosensor for zinc ion

Two new macrocyclic systems (L¹, L²) containing two emissive naphthalene were synthesized and characterized. The macrocycles were studied by ¹H NMR, ¹³C NMR, COSY, HMQC, DEPT, microanalysis and mass spectroscopy. The influence of metal cations Na⁺, Cr³⁺, Mn²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, and Hg²⁺ on the spectroscopic properties of the macrocyclic systems in acetonitrile/DMF 9:1 (v/v) mixtures were investigated by means of absorption and emission spectrophotometry. The macrocycle L¹ was found to be as an effective fluorescence sensor for Zn²⁺ ions. Zn²⁺ and Cd²⁺ ions show the most effects on the fluorescence intensity of L².