Cu(I)-mediated deoxygenation of N-oxides to amines

A mild and highly efficient deoxygenation of variety of N-oxides using an inexpensive CuX, or a CuX-Zn or CuX-Al couple is described.     

l-Proline catalyzed selective synthesis of 2-aryl-1-arylmethyl-1H-benzimidazoles

l-Proline (10 mol %) was found to be a versatile organocatalyst for the selective synthesis of 2-aryl-1-arylmethyl-1H-benzimidazoles from a wide range of substituted o-phenylenediamines and aldehydes in moderate to excellent isolated yields (32-95%) under mild conditions using chloroform as a solvent at ambient temperature.     

Flexible cofacial binuclear metal complexes derived from alpha,alpha-bis(salicylimino)-m-xylene

The tetradentate Schiff-base ligand SIXH2 (alpha,alpha-bis(salicylimino)-m-xylene), prepared from salicylaldehyde and m-xylylenediamine, forms cofacial binuclear complexes with Pd and Cu. Of the two isomers possible (trans-syn and trans-anti) for M2(SIX)2, these complexes crystallize exclusively as the trans-anti isomer. In ansolvous Pd2(SIX)2, the metal-containing planes are approximately parallel, with PdPd 4.416(1) A. Pd2(SIX)2 also forms a crystalline solvate, in which the molecules adopt a more open conformation with longer metal-metal distances (5.109(1) and 5.112(1) A). The M...M distance is significantly longer in Cu2(SIX)2 (6.653(1) A), because of conformational changes in the m-xylylene moieties and substantial tetrahedral distortion about Cu.     

Synthesis of 4,6-disubstituted-7-β-D-ribofuranosyl- and arabinofuranosylpyrazolo[3,4-d]pyrimidines and certain related ribonucleosides

Several disubstituted pyrazolo[3,4-d]pyrimidine, pyrazolo[1,5-a]pyrimidine and thiazolo[4,5-d]pyrimidine ribonucleosides have been prepared as congeners of uridine and cytidine. Glycosylation of the trimethylsilyl (TMS) derivative of pyrazolo[3,4-d]pyrimidine-4,6(1H,5H,7H)-dione ( 4 ) with 1-O-acetyl-2,3,5-tri-O-benzoyl-D-ribofuranose ( 5 ) in the presence of TMS triflate afforded 7-(2,3,5-tri-O-benzoyl-β-D-ribofuranosyl)pyrazolo-[3,4-d]pyrimidine-4,6(1H,5H)-dione ( 6 ). Debenzoylation of 6 gave the uridine analog 7-β-D-ribofuranosylpyrazolo[3,4-d]pyrimidine-4,6(1H,5H)-dione ( 3 ), identical with 7-ribofuranosyloxoallopurinol reported earlier. Thiation of 6 gave 7 , which on debenzoylation afforded 7-β-D-ribofuranosyl-6-oxopyrazolo[3,4-d]pyrimidine-4(1H,5H)-thione ( 8 ). Ammonolysis of 7 at elevated temperature gave a low yield of the cytidine analog 4-amino-7-β-D-ribofuranosylpyrazolo[3,4-d]pyrimidin-6(1H)-one ( 11 ). Chlorination of 6 , followed by ammonolysis, furnished an alternate route to 11 . A similar glycosylation of TMS-4 with 2,3,5-tri-O-benzyl-α-D-arabinofuranosyl chloride ( 12 ) gave mainly the N7-glycosylated product 13 , which on debenzylation provided 7-β-D-arabinofuranosylpyrazolo[3,4-d]pyrimidine-4,6(1H,5H)-dione ( 14 ). 4-Amino-7-β-D-arabinofuranosyl-pyrazolo[3,4-d]pyrimidin-6(1H)-one ( 19 ) was prepared from 13 via the C4-pyridinium chloride intermediate 17 . Condensation of the TMS derivatives of 7-hydroxy- ( 20 ) or 7-aminopyrazolo[1,5-a]pyrimidin-5(4H)-one ( 23 ) with 5 in the presence of TMS triflate gave the corresponding blocked nucleosides 21 and 24 , respectively, which on deprotection afforded 7-hydroxy- 22 and 7-amino-4-β-D-ribofuranosylpyrazolo[1,5-a]pyrimidin-5-one ( 25 ), respectively. Similarly, starting either from 2-chloro ( 26 ) or 2-aminothiazolo[4,5-d]pyrimidine-5,7-(4H,6H)-dione ( 29 ), 2-amino-4-β-D-ribofuranosylthiazolo[4,5-d]pyrimidine-5,7(6H)-dione ( 28 ) has been prepared. The structure of 25 was confirmed by single crystal X-ray diffraction studies.     

Quantifying the relative contribution of hydrogen bonding and hydrophobic environments, and coordinating groups, in the zinc(II)-water acidity by synthetic modelling chemistry

Ligands derived from the tripodal N4 ligand tris(pyridylmethyl)amine ((pyCH2)3N, tpa) of general formula (6-RNHpyCH2)nN(CH2py)(3-n)(R = H, n= 1-3 L(1-3); R = neopentyl, n= 1-3 L'(1-3)) were used to elucidate and quantify the magnitude of the effects exerted by hydrogen bonding and hydrophobic environments in the zinc-water acidity of their complexes. The pKa of the zinc-bound water molecule of [(L(1-3))Zn(OH2)]2+ and [(L'(1-3))Zn(OH2)]2+ 1'-3' was determined by potentiometric pH titrations in water (1-3) or water-ethanol (1:1) (1'-3'). The zinc(II) water acidity gradually increases as the number of -NH2 hydrogen bonding groups adjacent to the water molecule increases. Thus, the zinc-bound water of [(L3)Zn(OH2)]2+ and [(tpa)Zn(OH2)]2+ deprotonate with pKa values of 6.0 and 8.0, respectively. The pKa of the water molecule, however, is only raised from 8.0 in [(tpa)Zn(OH2)]2+ to 9.1 in [(bpg)Zn(OH2)]+ (bpa =(pyCH2)2N(CH2COO-)). Moreover, the acidity of the zinc-bound water of several of the five-coordinate zinc(II) complexes with the hydrogen bonding groups is greater than that of four-coordinate [((12)aneN3)Zn(OH2)]2+ (pKa = 7.0). This result shows that the magnitude of the effect exerted by the hydrogen bonding groups can be larger than that induced by changing one neutral by one anionic ligand, and/or even by changing the coordination number of the zinc(II) centre. The X-ray structure of [(L'2)Zn(OH)]ClO4 2' and [(L'3)Zn(OH)]ClO4.CH3CN 3'.CH3CN is reported, and show the neopentylamino groups forming N-H...O hydrogen bonds with the zinc-bound hydroxide. Although, which have hydrogen bonding and hydrophobic groups, have a zinc-bound water more acidic than [(tpa)Zn(OH2)]2+, their pKa is not always lower than that of 1-3. This result suggests that a hydrogen bonding microenvironment may be more effective than a hydrophobic one to increase the zinc-water acidity.     

Iron(III) chloride catalysed three-component Grieco condensation: Synthesis of tetrahydropyrido[2′,3′:3,4]pyrazolo[1,5-a]pyrimidines/quinazolines

Three-component Grieco condensation reaction of 3-aminopyrazolo[3,4-b]pyridine, formaldehyde/benzaldehyde and electron rich alkenes in presence of iron(III) chloride gave tetrahydropyrido[2′,3′:3,4]pyrazolo[1,5-a]pyrimidines/quinazolines in single pot. The sequence of reactions is formation of di-azadiene in situ and the subsequent regioselective addition of alkenes in aza-Diels Alder type reaction. The structure and stereochemistry of the products were confirmed by spectral data and single crystal X-ray crystallography.     

Kinetics of decomposition of hydrogen peroxide on Fe(III)?Al(III) hydroxide-oxide systems

The kinetics of decomposition of hydrogen peroxide have been studied on mixed Fe(III)–Al(III) hydroxide and oxide catalysts. While iron hydroxide possesses considerable catalytic activity, aluminium hydroxide has very little activity. The rate of decomposition on mixed hydroxides increases with increasing concentration of aluminium hydroxide up to about 1.5 mol% and decreases thereafter. The mixed oxides possess negligible activity compared to the corresponding hydroxides. The energy of activation, as calculated from the Arrhenius equation, is 10.1 kcal/mol for sample S4, containing 1.52 mol% of alumina. The rate of decomposition of S4 increases with increasing pH up to 6.8 and decreases thereafter. The rate is first order in all these cases. A suitable mechanism is suggested.

---

Fe(III)–Al(III). , . , 1,5 , . . , , 10,1 / S4, 1,52 . S4 pH 6,8, . . .

     

Binding and condensation of plasmid DNA onto functionalized carbon nanotubes: toward the construction of nanotube-based gene delivery vectors

Carbon nanotubes (CNTs) constitute a class of nanomaterials that possess characteristics suitable for a variety of possible applications. Their compatibility with aqueous environments has been made possible by the chemical functionalization of their surface, allowing for exploration of their interactions with biological components including mammalian cells. Functionalized CNTs (f-CNTs) are being intensively explored in advanced biotechnological applications ranging from molecular biosensors to cellular growth substrates. We have been exploring the potential of f-CNTs as delivery vehicles of biologically active molecules in view of possible biomedical applications, including vaccination and gene delivery. Recently we reported the capability of ammonium-functionalized single-walled CNTs to penetrate human and murine cells and facilitate the delivery of plasmid DNA leading to expression of marker genes. To optimize f-CNTs as gene delivery vehicles, it is essential to characterize their interactions with DNA. In the present report, we study the interactions of three types of f-CNTs, ammonium-functionalized single-walled and multiwalled carbon nanotubes (SWNT-NH3+; MWNT-NH3+), and lysine-functionalized single-walled carbon nanotubes (SWNT-Lys-NH3+), with plasmid DNA. Nanotube-DNA complexes were analyzed by scanning electron microscopy, surface plasmon resonance, PicoGreen dye exclusion, and agarose gel shift assay. The results indicate that all three types of cationic carbon nanotubes are able to condense DNA to varying degrees, indicating that both nanotube surface area and charge density are critical parameters that determine the interaction and electrostatic complex formation between f-CNTs with DNA. All three different f-CNT types in this study exhibited upregulation of marker gene expression over naked DNA using a mammalian (human) cell line. Differences in the levels of gene expression were correlated with the structural and biophysical data obtained for the f-CNT:DNA complexes to suggest that large surface area leading to very efficient DNA condensation is not necessary for effective gene transfer. However, it will require further investigation to determine whether the degree of binding and tight association between DNA and nanotubes is a desirable trait to increase gene expression efficiency in vitro or in vivo. This study constitutes the first thorough investigation into the physicochemical interactions between cationic functionalized carbon nanotubes and DNA toward construction of carbon nanotube-based gene transfer vector systems.