Thermo-oxidative processes in biodegradable poly(butylene succinate)

Aliphatic polyesters have acquired significant interest as environmentally friendly thermoplastics for a wide range of applications, and understanding their degradation behaviour has relevance both for processing and end uses. We have investigated the thermal and thermo-oxidative degradation processes occurring in synthetic and commercial poly(butylene succinate) (PBSu). Thermal oxidation was performed in atmospheric air using extremely thin polymer films at 170 °C for up to 6 h. The oxidized compounds were analyzed by size exclusion chromatography (SEC), NMR spectroscopy, and Mass Spectrometry (MALDI-TOF MS). A measurable reduction of the molar mass of the polyesters was soon apparent, promoting the formation of PBSu oligomers with different end groups. MALDI mass spectrometry combined with the use of extremely thin polyester films provided a virtual magnifying glass to obtain exhaustive information on the structure of the oxidation products. An α-H abstraction mechanism has been unambiguously ascertained to be the primary step in PBSu oxidation. The oxidized polymer chains originating from the decomposition of the hydroperoxide intermediate by radical rearrangement reactions had not been revealed before. The latter products subsequently undergo chain scission processes, which can be accurately traced from the chemical species identified in our work. Thermal degradation experiments were also performed under nitrogen at 240-260 °C. The new species identified in the MALDI spectra support a decomposition pathway taking place through a β-hydrogen-transfer mechanism, followed by the production of succinic anhydride from succinic acid end molecules via a back-biting process.     

Thermal analysis of dithiomalonamide complexes

Dithiomalonamide [H₂A, CH₂(CSNH₂)₂] and 2,2-dimethyldithiomalonamide [H₂B, C(CH₃)₂(CSNH₂)₂] can act as bidentate ligands and form stable, cationic 1∶2 complexes with general formula M₂(H₂L)₂X₂ [M=Ni²⁺, Pd²⁺, Pt²⁺;X=C1, Br, I; H₂L=H₂A, H₂B] in strong acidic medium. An elaborate thermal study is presented, based on results from elemental analyses and vibrational studies (IR and Raman spectroscopy). The H₂A complexes start to decompose by releasing two HX molecules whereafter a stable intermediate M(HA)₂ is formed. The H₂B complexes degrade in a different way; the metal-sulphur bond is broken and the ligand is expelled as a whole. Influences of the metal ion and of the halogenide counterions are investigated.     

Expedient parallel synthesis of 2-amino-4-heteroarylpyrimidines

[reaction: see text] An expedient synthesis of diverse 2-amino-4-heteroarylpyrimidines via a 2-chloropyrimidine intermediate is described. A series of potentially biologically active analogues have been synthesized in two parallel steps to afford focused arrays.     

Solid-phase microextraction gas chromatography/mass spectrometry: a new method for species identification of truffles

This study describes a rapid method to identify different truffle species by analysis of their volatile compound fraction using static headspace solid-phase microextraction gas chromatography/mass spectrometry. The volatile organic compounds (VOCs) were extracted using a new 2-cm 50/30 microm DVB/CAR/PDMS fiber placed for 10 min in the headspace of the truffle sample with the vial maintained at 20 degrees C (in a thermostatically controlled analysis room). The mass spectra of the VOC chromatograms were represented as 'fingerprints' of the analysed samples. Next, stepwise factorial discriminant analysis afforded a limited number of characteristic fragment ions that allowed a classification of the truffle species studied. This new method provides an effective approach to rapid quality control and identification of truffle species by analysis of their volatile fraction. Moreover, this method offers the advantage of minimizing thermal, mechanical, and chemical modifications of the truffles, thereby reducing the risk of analytical artifacts.     

Effect of time on the interfacial and foaming properties of beta-lactoglobulin/acacia gum electrostatic complexes and coacervates at pH 4.2

The electrostatic complexation between beta-lactoglobulin and acacia gum was investigated at pH 4.2 and 25 degrees C. The binding isotherm revealed a spontaneous exothermic reaction, leading to a DeltaHobs = -2108 kJ mol(-1) and a saturation protein to polysaccharide weight mixing ratio of 2:1. Soluble electrostatic complexes formed in these conditions were characterized by a hydrodynamic diameter of 119 +/- 0.6 nm and a polydispersity index of 0.097. The effect of time on the interfacial and foaming properties of these soluble complexes was investigated at a concentration of 0.1 wt % at two different times after mixing (4 min, referred as t approximately 0 h and t = 24 h). At t approximately 0 h, the mixture is mainly made of aggregating soluble electrostatic complexes, whereas after 24 h these complexes have already insolubilize to form liquid coacervates. The surface elasticity, viscosity and phase angle obtained at low frequency (0.01 Hz) using oscillating bubble tensiometry revealed higher fluidity and less rigidity in the film formed at t approximately 0 h. This observation was confirmed by diminishing bubble experiments coupled with microscopy of the thin film. It was thicker, more homogeneous and contained more water at t approximately 0 h as compared to t = 24 h (thinner film, less water). This led to very different gas permeability's of Kt approximately 0 h = 0.021 cm s(-1) and Kt=24 h) = 0.449 cm s(-1), respectively. Aqueous foams produced with the beta-lactoglobulin/acacia gum electrostatic complexes or coacervates exhibited very different stability. The former (t approximately 0 h) had a stable volume, combining low drainage rate and mainly air bubble disproportionation as the destabilization mechanism. By contrast, using coacervates aged for 24 h, the foam was significantly less stable, combining fast liquid drainage and air bubble destabilization though fast gas diffusion followed by film rupture and bubble coalescence. The strong effect of time on the air/water interfacial properties of the beta-lactoglobulin/acacia gum electrostatic complexes can be understood by their reorganization at the interface to form a coacervate phase that is more fluid/viscous at t approximately 0 h vs rigid/elastic at t = 24 h.     

Laboratory measurement of sound absorption of occupied pews and standing audiences

Places of worship, as well as other performing spaces or large arenas are characterized by lightweight pews or seats, with moderate or negligible upholstery, leading to very low absorption coefficients. Consequently, the audience becomes the most important sound absorbing element, capable of playing a fundamental role in determining the acoustic characteristics of the space. Consequently accurate knowledge of its acoustic properties is required for any design purpose. Several studies have been carried out with reference to audiences seated on upholstered theatre seats but there is a considerable lack of information about occupied pews. The well known difficulty of taking into account edge effects during such measurements poses further questions as well as the effect of the density of occupation, and the seasonal variations due to clothing. This paper presents the results of a series of laboratory measurements aimed at clarifying such aspects. The measurements showed that the edge effects are negligible and that total absorption is better related to the number of persons present than to the area they cover. Nonetheless, as the density grows, or when the audience is seated, there is a reduction in absorption which may be explained by the reduction in exposed body surface. Lightweight clothes show a considerable reduction in sound absorption over all the frequency bands, suggesting that significant seasonal fluctuations in reverberation time should be expected in places where the audience is the only sound absorbing surface.     

Quasi-homogeneous hydrogenation with platinum and palladium nanoparticles stabilized by dendritic core-multishell architectures

Platinum and palladium nanoparticles, supported and stabilized by polymeric core-shell architectures, proved to be active catalysts for hydrogenation reactions. Here, two different reactions were used as probes to investigate the influence of the polymeric support: the hydrogenation of α-methyl styrene (AMS) to cumene and the partial hydrogenation of 1,5-cyclooctadiene (COD). We found that the stability of the nanoparticles and the rate of reaction are higher in the presence of a hydrophobic octadecyl shell within a three-shell polymer system. The kinetic study of AMS hydrogenation showed much higher activities for palladium nanoparticles than for platinum nanoparticles, and the obtained results (e.g., 35 kJ/mol for the activation energy) are of the same order of magnitude as reported earlier for palladium supported on alumina. A methanol/n-heptane biphasic mixture was tested for catalyst recycling and allowed for highly efficient catalyst separation with very low metal leaching.     

Hierarchical Archimedean Dependence in Common Shock Models

Methodology and Computing in Applied Probability - In this paper we show how to extend a simple common shock model with Archimedean dependence of the hidden variables to the non-exchangeable case....     

Chloroform sorption in nanoporous crystalline and amorphous phases of syndiotactic polystyrene

The transport of chloroform in films of atactic polystyrene and of semicrystalline syndiotactic polystyrene in its nanoporous form (δ‐form) has been investigated by gravimetric analysis. Experimental tests have been performed at 35, 49, and 56 °C and at several vapor pressures ranging from 0.5 to 100 Torr. Nonequilibrium lattice fluid prediction of the amorphous sorption behavior was used to enucleate the sorption contribution of the crystalline nanoporous phase from semicrystalline samples. Sorption behavior of the crystalline phase has been interpreted on the basis of Langmuir equation. Moreover, the chloroform sorption at low activities in the crystalline nanoporous phase has been predicted by using Grand Canonical Monte Carlo molecular simulations. Isosteric heats of sorption were also experimentally evaluated for the crystalline phase, and compared with the corresponding prediction of molecular simulation. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 8–15, 2008