Gain and transient photoresponse of quantum well infrared photodetectors: a detailed ensemble Monte Carlo study

We investigate different gain characteristics observed on quantum well infrared photodetectors (QWIPs) fabricated with various material systems, and the effects of barrier material properties on the device characteristics through detailed ensemble Monte Carlo simulations. When the energy spacing between the central and satellite valleys is increased, the improvement in the excited electron lifetime is found to be much stronger than that in the average electron velocity in the device. According to our results, relatively high gain observed in InP/In_0.53Ga_0.47As QWIPs under large bias is not due to the higher mobility in InP as suggested earlier; it can mainly be attributed to higher excited electron lifetime as a result of relatively large Γ–L energy spacing. We discuss the details of the fast part of the Al_0.3Ga_0.7As/GaAs QWIP transient photoresponse, which exhibits three regions with different decay characteristics under a short pulse of radiation. The duration of the final region, during which the electrons excited near the emitter are extracted from the collector, is observed to be considerably long due to the dispersion of the photoelectrons. The photoresponse time rapidly decreases with increasing bias under low bias, and nearly saturates at 10 ps under large bias being 40% larger than the average transit time estimated by dividing the device length to the average steady-state electron velocity in device. We also investigate the effects of the interface reflections on the photoresponse time.     

Collective firing regularity of a scale-free Hodgkin–Huxley neuronal network in response to a subthreshold signal

We consider a scale-free network of stochastic HH neurons driven by a subthreshold periodic stimulus and investigate how the collective spiking regularity or the collective temporal coherence changes with the stimulus frequency, the intrinsic noise (or the cell size), the network average degree and the coupling strength. We show that the best temporal coherence is obtained for a certain level of the intrinsic noise when the frequencies of the external stimulus and the subthreshold oscillations of the network elements match. We also find that the collective regularity exhibits a resonance-like behavior depending on both the coupling strength and the network average degree at the optimal values of the stimulus frequency and the cell size, indicating that the best temporal coherence also requires an optimal coupling strength and an optimal average degree of the connectivity.     

Photooxygenation of 5-dialkylamino-4-pyrrolin-3-ones. Synthesis of highly functionalized ureas, 2-oxazolidinones, and 2-oxazolinones

5-Dialkylamino-4-pyrrolin-3-ones, available from cyclocondensation of amidines with dimethyl acetylenedicarboxylate (DMAD), undergo rapid singlet oxygenation to give highly functionalized ureas by way of a 1,2-dioxetane cleavage of the initially formed [2 + 2] cycloadducts. These latter compounds undergo cyclization to 2-oxazolidinones in MeOH. Catalytic hydrogenation of the ureas in EtOAc gives 2-oxazolinones. The DBU-DMAD adduct undergoes photooxygenation by an entirely different pathway to give a large ring heterocycle.     

Performance evaluation of IDW,Kriging and multiquadric interpolation methods in producing noise mapping: A case study at the city of Isparta,Turkey

In order to produce an accurate noise map of a city or a region, it is necessary to make noise measurements at certain locations and these measurements must be modeled with the most suitable mathematical algorithm. A homogeneous and representative distribution of the noise measurement points is the first key factor in the production of sound noise maps. The second key element is the calculation of the noise values of gridding points based on noise measurement points according to the selected mathematical calculation method and the generation of maps according to these gridding points. In this study, a noise map of the Isparta city center and its periphery was produced using inverse distance weighted (IDW), Kriging and multiquadric interpolation methods with different parameters and four grid resolution. Then, the influence of parameter selection for each method was investigated in themself by taking into account grid resolution, namely 10 ∗ 10 m, 50 ∗ 50 m, 100 ∗ 100 m and 200 ∗ 200 m, and the performance of three method with 50 ∗ 50 m grid resolution were compared with each other. In addition, the noise mapping of the city of Isparta were produced by Kriging method with respect to maximum, average and minimum noise data and they were evaluated by considering the national environmental noise thresholds.     

Improving the performance of DCT-based fragile watermarking using intelligent optimization algorithms

The performance of a fragile watermarking method based on discrete cosine transform (DCT) has been improved in this paper by using intelligent optimization algorithms (IOA), namely genetic algorithm, differential evolution algorithm, clonal selection algorithm and particle swarm optimization algorithm. In DCT based fragile watermarking techniques, watermark embedding can usually be achieved by modifying the least significant bits of the transformation coefficients. After the embedding process is completed, transforming the modified coefficients from the frequency domain to the spatial domain produces some rounding errors due to the conversion of real numbers to integers. The rounding errors caused by this transformation process were corrected by the use of intelligent optimization algorithms mentioned above. This paper gives experimental results which show the feasibility of using these optimization algorithms for the fragile watermarking and demonstrate the accuracy of these methods. The performance comparison of the algorithms was also realized.     

Growth,structure and optical properties of an efficient NLO crystal-aqua maleatocopper(II)

A promising non-linear optical (NLO) crystal, aqua maleatocopper(II) (CuC₄H₂O₄·H₂O), was grown at room temperature by the controlled ionic diffusion technique. Fourier transform infrared spectrum could identify the various functional groups in the crystal. Structural analysis using single crystal XRD revealed that the compound crystallizes in the monoclinic system with space group P2₁ and unit cell parameters a = 7.7277(5) Å, b = 5.2967(3) Å, c = 7.7179(4) Å, α = γ = 109.170(5)°, β = 111.995(2)°. The thermal stability and decomposition pattern of the material were explored using thermogravimetry (TG) and differential thermal analysis (DTA). The optical band gap energy of the material was estimated as 2.2 eV from the diffuse reflectance spectroscopy. The Kurtz and Perry powder technique established the crystal to be an efficient non-linear optical (NLO) material.     

Investigation of the effect of dual-size coatings on the hydrophobicity of cotton surface

A series of silica nanoparticles with two different length scales were introduced onto the cotton substrates to study the correlation between the surface structure and observed hydrophobicity. SiO₂ nanoparticles of 7, 12, 20, and 40 nm in size were individually functionalized using 3-aminopropyl triethoxysilane or 3-glycidoxypropyltrimethoxysilane. Amino functionalized silica nanoparticles were durably attached to the cotton surface that was previously treated with epichlorohydrin. By depositing an additional layer of epoxy modified silica nanoparticles, a dual-size hierarchical coating was obtained. It was found that the order of deposition of particles to develop dual-size coatings determines the surface roughness, hydrophobicity and the amount of silica loaded on the cotton substrate. Deposition of the bigger nanoparticles on top of smaller ones resulted in rougher surfaces, higher hydrophobicity and higher amount of silica loading onto the cotton surface. A strong correlation between the size ratio of deposited nanoparticle combinations and the amount of silica loading was observed. It was found that there is also a direct relationship between the surface roughness and the hydrophobicity of the samples generated. Based upon these correlations, it is now possible to tune surface roughness and subsequent wettability by controlling the sizes of the dual-type nanoparticle layers.     

Phthalocyanine with a giant dielectric constant

Compound 1 has been prepared by the reaction of 4-nitrophthalonitrile and trans-2-methoxy-4-(2-nitrovinil)phenol by the common method of nucleophilic substitution of an activated nitro group in an aromatic ring. The metallophthalocyanines 2, 3 were prepared by the reaction of a dinitrile derivative with Co(OAc)(2) or Zn(OAc)(2) in DMSO. The lutetium bis-(phthalocyaninato) complex 4 was obtained by treating the dinitrile derivative with lutetium acetate and DBU in 1-hexanol. The new compounds were characterized by elemental analyses, FT-IR, (1)H-NMR, MALDI-TOF MS and UV/Vis spectral data. The spectroscopic data of the new compounds were in accordance with the structures. The temperature and frequency dependence of dielectric and conduction properties of the spin coated film of compounds (2-4) have been studied by fabricating metal-Pc-metal structures. The results show that compound 2 has giant dielectric constant. At a low range of frequency and room temperature, ε' is found to be equal to 2.33 × 10(6), 1.53 × 10(4) and 1.03 × 10(4) for 2, 3 and 4, respectively. The giant dielectric behavior of 2 is mainly attributed to Maxwell-Wagner polarization. The obtained results also indicated that the frequency dependence of the dielectric permittivity, ε'(ω), exhibits non-Debye type relaxation for all temperatures investigated. The ac conductivity results gave a temperature dependent frequency exponent s. The results were compared with the prediction of the Quantum Mechanical Tunneling and Correlated Barrier Hopping models.     

Furo- and thieno-fused 1,3-diazepine-4,6-diones

We report the first preparation of furo- and thieno-fused 1,3-diazepine-4,6-dione derivatives starting from ethyl 2-(2-methoxy-2-oxoethyl)-3-furancarboxylate and -thiophencarboxylate. The ester functionalities connected to the hetero-ring were converted regiospecifically into the desired amides. The ester groups attached to the methylene unit were converted into isocyanates via Curtius rearrangement. The ring-closure reaction was performed in the presence of lithium bis(trimethylsilyl)amide at room temperature to give furo- and thieno-fused diazepinone derivatives.