Optoelectronic properties of SnO_2 thin films sprayed at different deposition times

This article presents the elaboration of tin oxide(SnO_2) thin films on glass substrates by using a home-made spray pyrolysis system. Effects of film thickness on the structural, optical, and electrical film properties are investigated. The films are characterized by several techniques such as x-ray diffraction(XRD), atomic force microscopy(AFM), ultravioletvisible(UV–Vis) transmission, and four-probe point measurements, and the results suggest that the prepared films are uniform and well adherent to the substrates. X-ray diffraction(XRD) patterns show that SnO_2 film is of polycrystal with cassiterite tetragonal crystal structure and a preferential orientation along the(110) plane. The calculated grain sizes are in a range from 32.93 nm to 56.88 nm. Optical transmittance spectra of the films show that their high transparency average transmittances are greater than 65% in the visible region. The optical gaps of SnO_2 thin films are found to be in a range of 3.64 e V–3.94 e V. Figures of merit for SnO_2 thin films reveal that their maximum value is about 1.15 × 10-4-1?atλ = 550 nm. Moreover, the measured electrical resistivity at room temperature is on the order of 10-2?·cm.     

Differential contribution of envelope fluctuations across frequency to consonant identification in quiet

Two experiments investigated the effects of critical bandwidth and frequency region on the use of temporal envelope cues for speech. In both experiments, spectral details were reduced using vocoder processing. In experiment 1, consonant identification scores were measured in a condition for which the cutoff frequency of the envelope extractor was half the critical bandwidth (HCB) of the auditory filters centered on each analysis band. Results showed that performance is similar to those obtained in conditions for which the envelope cutoff was set to 160 Hz or above. Experiment 2 evaluated the impact of setting the cutoff frequency of the envelope extractor to values of 4, 8, and 16 Hz or to HCB in one or two contiguous bands for an eight-band vocoder. The cutoff was set to 16 Hz for all the other bands. Overall, consonant identification was not affected by removing envelope fluctuations above 4 Hz in the low- and high-frequency bands. In contrast, speech intelligibility decreased as the cutoff frequency was decreased in the midfrequency region from 16 to 4 Hz. The behavioral results were fairly consistent with a physical analysis of the stimuli, suggesting that clearly measurable envelope fluctuations cannot be attenuated without affecting speech intelligibility.     

The 2<Superscript>1/3</Superscript> rule and other properties of ferromagnets near the temperature of the maximum of magnetic susceptibility

The behavior of the magnetization M and the magnetic susceptibility χ is theoretically analyzed for ferromagnets at the temperature T=T _m corresponding to the maximum of the function χ(T). Four new methods of determining the Curie temperature T_C with the use of the derived relationships are proposed. One of these methods is based on the relationship χ(T _m ) =2^1/3χ(T_C) (the 2^1/3 rule). The results are applied for processing experimental data obtained for lanthanum manganite of composition La_0.85Sr_0.15MnO₃.     

Charge density: A probe for the nuclear interaction in microscopic transport models

The transport properties of the ³⁶Ar +⁵⁸Ni system at measured with the INDRA array, are studied within the BNV kinetic equation. A general protocol of comparison between the N-body experimental fragment information and the one-body distribution function is developed using global variables, with a special focus on charge density. This procedure avoids any definition of sources and any use of an afterburner in the simulation. We shall discuss the feasibility of such an approach and the distortions induced by the finite detection efficiency and the completeness requirements of the data selection. The sensitivity of the different global observables to the macroscopic parameters of the effective nuclear interaction will be studied in detail.Received: 21 January 2003, Published online: 5 August 2003PACS: 25.70.-z Low and intermediate energy heavy-ion reactions - 24.10.-i Nuclear reaction models and methodsN. Le Neindre: Permanent address: Institut de Physique Nuclaire, IN2P3-CNRS, F-91406 Orsay cedex, France.     

Strain-induced properties of epitaxial VOx thin films

We have grown VOx thin films on different substrates in order to investigate the influence of epitaxial strain on the transport properties. We found that the electric conductivity is much larger for films grown under compressive strain on SrTiO3 substrates, as compared to bulk material and VOx films grown under tensile strain on MgO substrates. A clear crossover from metallic to semiconducting behavior is observed when increasing the oxygen content x. Apparently, the application of strain induces a Mott-Hubbard insulator-to-metal transition in VOx<1. The VOx/SrTiO3 films show an unexpected large positive magnetoresistance effect at low temperatures, which is not found in the VOx films grown under tensile strain on MgO or on a substrate with a similar lattice parameter.     

Are the New Physics Contributions from the Left-Right Symmetric Model Important for the Indirect CP Violation in the Neutral B Mesons?

No Heading Several works analyzing the new physics contributions from the Left-Right Symmetric Model to the CP violation phenomena in the neutral B mesons can be found in the literature. These works exhibit interesting and experimentally sensible deviations from the Standard Model predictions but at the expense of considering a low right scale υ_R around 1 TeV. However, when we stick to the more conservative estimates for υ_R, which say that it must be at least 10⁷ GeV, no experimentally sensible deviations from the Standard Model appear for indirect CP violation. This estimate for υ_R arises when the generation of neutrino masses is considered. In spite of the fact that this scenario is much less interesting and says nothing new about both the CP violation phenomenon and the structure of the Left-Right Symmetric Model, this possibility must be taken into account for the sake of completeness and when considering the see-saw mechanism that provides masses to the neutrino sector. ¹ Associate researcher of the Centro Internacional de Física, Ciudad Universitaria, Bogotá D.C., Colombia.     

Response of bare 1-3 piezocomposite array to localized electrical excitation

The theoretical response of a 1-3 piezocomposite plate submitted to localized electrical excitation was studied with the theory of guided waves. The theoretical modeling was based on the global matrix method, and the piezocomposite material was considered as a homogeneous medium. To validate the theoretical results, experimental displacement measurements were performed with an interferometric probe on two piezocomposite plates, one with a single element and one with an array of electrodes. The measured response on the single-element plate was mainly supported by the S0 and S3 modes of the plate. Homogenization limits of the composite in terms of frequency and wave number are defined on the basis of data from this sample. Within these limits, the piezocomposite material operates as a homogeneous medium, and comparison between theoretical and experimental results allows the equivalent electroacoustic parameters to be evaluated. A second sample was measured to study the effects of the electrode array on the electroacoustic response of the plate. Two kinds of electrical excitation were studied.