《光谱学与光谱分析》2007年征订启事

The authors achieved the temporal coherent control in an Er^3＋ doped telluride glass, one kind of disordered solids. The upconversion at 670 nm was modulated and the dephasing time was simulated as 300 fs. Moreover, the photon echo signal gave the dephasing time due to the phonon interaction. The agreement between the two data indicates that the interaction between the wavepacket and the phonon leads to the fast disappearance of wavepackets interference, which is helpful for the tech- nique to be applied to the disordered solids.     

Nanostructured thermoset epoxy resin templated by an amphiphilic poly(ethylene oxide)‐block‐poly(dimethylsiloxane) diblock copolymer

An amphiphilic poly(ethylene oxide)‐block‐poly(dimethylsiloxane) (PEO–PDMS) diblock copolymer was used to template a bisphenol A type epoxy resin (ER); nanostructured thermoset blends of ER and PEO–PDMS were prepared with 4,4′‐methylenedianiline (MDA) as the curing agent. The phase behavior, crystallization, hydrogen‐bonding interactions, and nanoscale structures were investigated with differential scanning calorimetry, Fourier transform infrared spectroscopy, transmission electron microscopy, and small‐angle X‐ray scattering. The uncured ER was miscible with the poly(ethylene oxide) block of PEO–PDMS, and the uncured blends were not macroscopically phase‐separated. Macroscopic phase separation took place in the MDA‐cured ER/PEO–PDMS blends containing 60–80 wt % PEO–PDMS diblock copolymer. However, the composition‐dependent nanostructures were formed in the cured blends with 10–50 wt % PEO–PDMS, which did not show macroscopic phase separation. The poly(dimethylsiloxane) microdomains with sizes of 10–20 nm were dispersed in a continuous ER‐rich phase; the average distance between the neighboring microdomains was in the range of 20–50 nm. The miscibility between the cured ER and the poly(ethylene oxide) block of PEO–PDMS was ascribed to the favorable hydrogen‐bonding interaction. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3042–3052, 2006     

HgCl2/I2复合催化剂协同催化合成异丙醇钇的研究

以金属钇和异丙醇为原料，以HgCl2/I2为复合催化剂，通过对金属钇的机械加工以增加其比表面，并将异丙醇脱水使其含水量降低至0．05％，体系在82℃回流5h，经过滤、减压蒸馏，得到了白色海绵状异丙醇钇，其产率高达83％，合成时间比文献报道的缩短了19h，产率提高了8％。文章确定了催化剂的最佳用量为20gY加入60mg HgCl2/I2，研究了合成产率与HgCl2/I2催化剂和HgCl2催化剂的依赖关系及异丙醇中含水量对合成产率的影响，并对HgCl2/I2的催化作用机理进行了初步探讨。     

On a class of new and practical performance indexes for approximation of fold bifurcations of nonlinear power flow equations

Efficient measurement of the performance index (the distance of a loading parameter from the voltage collapse point) is one of the key problems in power system operations and planning and such an index indicates the severity of a power system with regard to voltage collapse. There exist many interesting methods and ideas to compute this index. However, some successful methods are not yet mathematically justified while other mathematically sound methods are often proposed directly based on the bifurcation theory and they require the initial stationary state to be too close to the unknown turning point to make the underlying methods practical.This paper first gives a survey of several popular methods for estimating the fold bifurcation point including the continuation methods, bifurcation methods and the test function methods (Seydel's direct solution methods, the tangent vector methods and the reduced Jacobian method) and discuss their relative advantages and problems. Test functions are usually based on scaling of the determinant of the Jacobian matrix and it is generally not clear how to determine the behaviour of such functions. As the underlying nonlinear equations are of a particular type, this allows us to do a new analysis of the determinants of the Jacobian and its submatrices in this paper. Following the analysis, we demonstrate how to construct a class of test functions with a predictable analytical behaviour so that a suitable index can be produced. Finally, examples of two test functions from this class are proposed. For several standard IEEE test systems, promising numerical results have been achieved.     

相对论性无自旋粒子在Hartmann势场中运动的精确解

在标量势等于矢量势的条件下,本文获得了具有Hartmann型势的Klein-Gordon方程的精确解.给出了束缚态的精确的能谱方程和归一化的径向波函数,对于散射态,获得了按“k/2π标度”归一化的径向波函数和相移的解析计算公式.讨论了散射振幅的解析性质和波函数、能谱方程以及相移的非相对论近似.     

遥感相机自动检焦技术研究

将基于图像处理的自动检焦技术应用于线阵CCD推扫成像的空间遥感相机中。图像法检焦的关键在于对焦评价函数的选取。通常对焦评价函数是在摄影目标不变的情况下得出的,而推扫成像的线阵CCD相机在任意时刻所拍摄的景物都是不同的,这就给对焦评价函数的选取增加了难度。用功率谱的方法对任意景物在空间频域进行分析表明,功率谱对于自然景物具有一定的不变性。由此建立了基于功率谱的对焦评价函数,采用小波去噪与亮度归一化相结合的图像预处理技术有效地去除了图像噪声和亮度变化对对焦精度的影响。通过对功率谱评价函数进行加权处理,提高了对焦评价函数曲线的灵敏度。仿真实验表明了所构造的对焦评价函数是可行的。     

第五讲新型光纤水听器和矢量水听器

光纤水听器和矢量水听器作为当前水声研究领域最具有代表性的两大技术倍受业界关注。光纤水听器的重要贡献在于，从一个全新的角度出发，试图解决传统的水声传感和声纳数据传输一体化设计和实现的一系列问题，这有助于改善声纳系统的可靠性，并且有可能降低其制造、使用和维护的总成本。矢量水听器则由于其特有的指向性和矢量一相位处理方法，在低频和甚低频水声微弱目标探测方面具有潜在的优势．经过不懈的努力，光纤水听器和矢量水听器系统已经从实验室逐渐进入到工程应用阶段．这些对未来声纳系统的发展会产生相当重要的影响．文章尝试从声纳设计的角度对这两者的技术现状进行简要综述，包括它们各自的物理基础、工作原理、关键技术和应用领域．     

同步辐射讲座 第二讲 同步辐射X射线荧光及其在植物微量元素分析中的应用

比较了同步辐射（SR）X射线荧光（XRF），电子和质子激发的X射线谱，介绍了XRF谱的采集方法及数据处理方法（主要是能谱方法），智能方法的无标样（基本参数法）定量分析原理，以及近期在植物微量元素分析中得到的结果。     

超临界流体触媒作用下石墨-金刚石转变

 研究了超临界流体CO₂在石墨-金刚石转变中的触媒作用。实验中，采用Ag₂O作为流体触媒的先驱材料，在7.7 GPa压力下，Ag₂O在1 200 ℃分解成Ag和O₂，O₂与石墨套管在高温高压下反应形成CO₂超临界流体。研究结果表明，在7.7 GPa和1 500 ℃以上温度条件下，石墨在CO₂流体触媒的作用下可转变为金刚石晶体，在1 500～1 700 ℃温度范围内合成出的金刚石具有完好的八面体形貌，与天然金刚石的生长特征非常相似。     

声波在一维声子晶体中共振隧穿的研究

通过从实验和理论方面对声波在一维声子晶体单晶体和被小的共振腔分开的双晶体中传播时发生的隧穿和共振隧穿现象的研究，观察到了声子晶体单晶体在带隙频率范围内发生的隧穿现象，而对于双晶体样品，在带隙频率范围内出现了很强的共振透射峰.共振发生时，实验测得的群时间很大，但是没有共振时，群速度却很快. 关键词： 声波 声子晶体 隧穿 共振