新型π-扩展TTF衍生物的合成、晶体结构及量子化学计算

以对苯二胺为起始原料合成了2个新型的π-扩展四硫富瓦烯(TTF)衍生物,即N,N’-2(4,5-二苄硫基-1,3-二硫杂环戊烯-2-叶立德)-苯-1,4-二胺(5a)和N,N’-2(4,5-二甲酯基-1,3-二硫杂环戊烯-2-叶立德)-苯-1,4-二胺(5b),并利用氢核磁共振(1H NMR)、质谱(MS)、傅里叶变换红外光谱(FTIR)和单晶X射线衍射(XRD)等方法对化合物结构进行了表征.晶体结构分析结果表明,化合物5a和5b分属三斜晶系、P1空间群和单斜晶系、P21/n空间群.化合物5a和5b均为非平面结构分子,分子中对苯二亚胺平面和1,3-二硫杂环平面形成的二面角分别为87.61°(5a)和43.77°(5b).运用Gaussian 09程序,采用密度泛函理论(DFT)方法在B3LYP/6-31+G(d,p)水平上进行了量子化学计算,对化合物的前线分子轨道、静电势和电子吸收光谱进行了讨论,计算结果与实验值基本一致.     

硬脂酸/异氰酸酯摩尔比对聚丙烯/木粉复合材料性能的影响

用甲苯-2,4-二异氰酸酯（TDI）和硬脂酸（SA）复合改性木粉,在双螺杆挤出机中制备了聚丙烯（PP）基的木塑复合材料（WPC）,研究了SA/TDI摩尔比对木粉表面性能、复合材料力学性能和加工性能的影响。 结果表明,随着SA/TDI摩尔比的增大,改性木粉的表面张力逐渐减小,与PP的界面张力先减小后增大;与未改性的WPC相比,SA/TDI复合改性剂对WPC的拉伸强度、弯曲强度、缺口冲击强度影响不明显,但对无缺口冲击强度提升较大;当SA/TDI摩尔比为1.07时,复合材料的无缺口冲击强度和熔体质量流动速率分别达到9.74 kJ/m2和13.12 g/10 min,分别比未改性WPC提高了77%和22%。     

内嵌镧金属富勒烯的高产率合成及异构体比例调控

采用电弧放电法制备内嵌镧金属富勒烯的原灰,通过改变氦气压力及电流强度来提高内嵌镧金属富勒烯产率。原灰由1,2,4-三氯苯提取并回溶入甲苯后,利用分析型高相液相色谱（HPLC）对提取液中各富勒烯组分进行分析。通过分别衡量3种常见含镧金属富勒烯La@C_2v-C₈₂、La@C_s-C₈₂和La₂@C₈₀与C₈₄的相对峰面积比,探讨了氦气压力和电流强度等对3种金属富勒烯产率的影响。实验结果表明,氦气压力与电流强度共同决定了金属富勒烯的产率,在（1）低电流高氦气压、（2）中等电流中等氦气压、（3）高电流低氦气压的条件下都可以高产率地获得含镧金属富勒烯。此外,调整电流强度和氦气压力可以改变La@C_2v-C₈₂和La@C_s-C₈₂的相对比例。例如,在电流为100、120 A或氦气压为20、35 kPa时,此前认为的"minor"异构体La@C_s-C₈₂的含量甚至高于"major"异构体La@C_2v-C₈₂。我们还发现,降低电流强度或减小氦气压力可促进La₂@C₈₀的生成,这表明La₂@C₈₀与La@C₈₂的形成过程可能是不同的。     

碳化硅和碳化硼在电催化中的应用

燃料电池是具有广泛应用前景的新能源技术。碳载铂基催化剂（Pt/C）是最常用的燃料电池电极催化剂,不过Pt/C稳定性较差、且成本高昂,严重限制了燃料电池的规模化应用。共价型碳化物碳化硅和碳化硼,由于具有极强的共价键,其物化稳定性优异,成为制备高稳定性、低成本的燃料电池催化剂的重要基础材料。本文总结了相关研究成果,介绍了碳化硅和碳化硼的独特优势,讨论了相关研究的发展方向。     

Impact of Reaction Conditions on the Structures of Nickel(II) Complexes Based on 3‐(4‐Carboxyphenyl)propionic Acid

Two new nickel(II) complexes, [Ni(4, 4′‐bpy)(H₂O)₄]_n · n(cpp) · 0.5nH₂O ( 1 ) and [Ni(cpp)(4, 4′‐bpy)(H₂O)₂]_n ( 2 ) [4, 4′‐bpy = 4, 4′‐bipyridine, H₂cpp = 3‐(4‐carboxyphenyl)propionic acid] were synthesized and characterized by single‐crystal X‐ray diffraction, elemental analysis, IR spectroscopy, and thermal analysis. In complex 1 , Ni^II ions are bridged by 4, 4′‐bpy into 1D chains, and cpp ligands are not involved in the coordination, whereas in complex 2 , cpp ligands adopt a bis(monodentate) mode and link Ni^II ions into 2D (4, 4) grids with the help of 4, 4′‐bpy ligands. Triple interpenetration occurs, which results in the formation of a complicated 3D network. The difference in the structures of the two complexes can be attributed to the different reaction temperatures and bases.     

Ⅱ型TiO2/g-C3N4异质结的构筑促进高效光催化U(Ⅵ)还原

采用水热法将TiO₂纳米片修饰在中空管状g-C₃N₄上制备了TiO₂/g-C₃N₄(T-CN)复合催化剂。利用扫描电子显微镜(SEM)、X射线光电子能谱(XPS)、紫外可见漫反射光谱(UV-Vis DRS)和光电流响应等对其形貌、结构和光物理性能进行了表征。结果表明,TiO₂纳米片均匀地分散在中空管状g-C₃N₄表面,两者紧密结合形成异质结。TiO₂与g-C₃N₄的质量比为20%时制得的T-CN-20复合催化剂在60 min内对U (Ⅵ)的去除率为85.64%,是纯相g-C₃N₄的6.7倍。在10倍高浓度阳离子共存条件下的去除率仍大于69.8%,且具有优良的结构稳定性。对光催化产物分析可知,T-CN将U (Ⅵ)还原为难溶的U (Ⅳ)(63.68%)以去除铀,可有效解决含铀核废水中的U (Ⅵ)污染问题。根据能带理论分析,提出了复合催化剂异质结的Ⅱ型光催化机理。     

多级孔NiMo负载TS-1分子筛催化剂的制备及其加氢脱硫性能

钛硅(TS-1)分子筛的微孔孔道严重限制了其在复杂分子催化转化中的应用,为了克服这一问题,通过酸洗脱、碱刻蚀及二者相结合的方法制备了多级孔 TS-1 分子筛,并采用等体积共浸渍法制备了相应的 NiMo 负载型催化剂;使用 X 射线衍射(XRD)、N₂吸附-脱附、吡啶吸附红外光谱(Py-FTIR)、氢气程序升温还原(H₂-TPR)、X射线光电子能谱(XPS)和高分辨透射电子显微镜(HR-TEM)等方法对多级孔TS-1分子筛的理化性质进行了表征;以二苯并噻吩(DBT)为探针对催化剂的加氢脱硫(HDS)性能进行了评价。结果表明,和常规TS-1分子筛相比,多级孔TS-1分子筛保持了MFI拓扑结构,比表面积增大且具有介孔结构,分子筛表面形成了适量的Brønsted酸中心;相应催化剂上活性金属与载体间相互作用得以改善,MoS₂片晶长度和堆垛层数适宜,形成了更多的 NiMoS活性相;催化剂活性和选择性均有所提升,尤其是酸洗脱获得的 NiMo/AT-TS-1催化剂的活性相较未经处理的NiMo/TS-1催化剂提升了1.2倍,直接脱硫(DDS)路径选择性提升了22%。     

电感耦合等离子体原子发射光谱法测定烧结增效剂中三氧化二硼和二氧化锰

提出了电感耦合等离子体原子发射光谱法测定烧结增效剂中主成分三氧化二硼和二氧化锰含量的方法。用盐酸-硝酸混合溶液溶解样品,选择波长257.610,249.773 nm两条谱线分别作为测定硼和锰的分析线,采用背景校正来扣除干扰。方法用于烧结增效剂样品分析,测定结果与化学法测定值相一致。     

Electronic Coupling between Two Amine Redox Sites through the 5,5′‐Positions of Metal‐Chelating 2,2′‐Bipyridines

Electron delocalization of new mixed‐valent (MV) systems with the aid of lateral metal chelation is reported. 2,2′‐Bipyridine (bpy) derivatives with one or two appended di‐p‐anisylamino groups on the 5,5′‐positions and a coordinated [Ru(bpy)₂] (bpy=2,2′‐bipyridine), [Re(CO)₃Cl], or [Ir(ppy)₂] (ppy=2‐phenylpyridine) component were prepared. The single‐crystal molecular structure of the bis‐amine ligand without metal chelation is presented. The electronic properties of these complexes were studied and compared by electrochemical and spectroscopic techniques and DFT/TDDFT calculations. Compounds with two di‐p‐anisylamino groups were oxidized by a chemical or electrochemical method and monitored by near‐infrared (NIR) absorption spectral changes. Marcus–Hush analysis of the resulting intervalence charge‐transfer transitions indicated that electron coupling of these mixed‐valent systems is enhanced by metal chelation and that the iridium complex has the largest coupling. TDDFT calculations were employed to interpret the NIR transitions of these MV systems.     

Transesterification of Soybean Oil Catalyzed by Calcium Hydroxide which Obtained from Hydrolysis Reaction of Calcium Carbide

Calcium carbide residue (CCR) was investigated in transesterification reaction of triglycerides to determine its viability as a solid catalyst for biodiesel synthesis. Literature survey showed that CCR has never been studied as a solid catalyst in the transesterification of triglyceride. The scope of the study includes the effects of CCR calcination temperature, calcination time, the alcohol/oil molar ratio, the catalyst amount (wt % of oil) and the reaction time. The relationship between chemical composition and catalytic activity of waste cement was also investigated. These CCR catalysts, thermally activated at 600 °C, can give rise to fatty acid methyl esters (FAME) purity higher than 99.5%, after 3 h of reaction, when oil/methanol molar ratio of 1/12 and 1 wt % of the catalyst were employed. Application of CCR as catalyst for biodiesel production in this study may not only provide a cost‐effective and environment friendly way of recycling CCR waste but also reduce hopefully the cost of biodiesel production.