一维链状冠醚配合物:[{Na(18-C-6)}2(H2O)]n[M(SCN)4]n(M=Pd、Pt)的合成与结构

The reactions of 18-crown-6 with Na₂[M(SCN)₄] (M= Pd,Pt) were studied and the complex 1 [{Na(18-C-6)}₂(H₂O)]_n[Pd(SCN)₄]_n and complex 2 [{Na(18-C-6)}₂(H₂O)]_n[Pt(SCN)₄]_n were characterized by ele-mental analysis, IR and X-ray diffraction analysis. The complexes belong to monoclinic, space group P2₁/n with cell dimensions, 1:a=1.05734(7),b=1.42250(10),c=1.47762(10) nm,β=107.5330(10)°,V=2.1192(2)nm³,Z=2,D_calcd=1.460g·cm^-3,F(000)=964,R₁=0.0406,wR₂=0.1264 and 2:a=1.05985(19),b=1.4237(3),c=1.4744(3) nm,β=107. 096(3)°, V=2.1264(7)nm³,Z=2,D_calcd=1.690g·cm^-3,F(000)=1028,R₁=0.0292,wR₂=0.0859. In the solid state, the complexes 1 and 2 show an one-dimensional chain of [{Na(18-C-6)}₂(H₂O)]²⁺ complex cations and [M(SCN)₄]^2- (M=Pd,Pt) complex anions bridged by Na-N in-teractions.     

5-氟尿嘧啶-1-乙酸合铜(Ⅱ)的合成及其与DNA的作用

The 5-fluorouracil-1-acetic acid (5FuAA) and its Cu(Ⅱ) complex (5FuAACu) were synthesized and the date for the crystal complex was obtained. The interaction of 5-fluorouracil-1-acetic acid (5FuAA) and its Cu(Ⅱ) complex (5FuAACu) with DNA was also investigated by using spectral, viscometric, electrochemical and agarose gel electrophoresis methods. The results of interaction with DNA suggest that both 5FuAA and 5FuAACu can bind to DNA in a static electricity attraction mode. But the attraction of 5FuAACu is greater than that of 5FuAA.     

分子内扭转电荷转移探针DMABN测定表面活性剂水溶液的临界胶团浓度

以对二甲氨基苯甲腈(DMABN)为探针, 测定它在表面活性剂(C12TABr、SDS、C12E23、C12-3-12·2Br)水溶液中的第二重荧光强度(Ia)和对应的特征波长(λa)对表面活性剂浓度(c)曲线, 由Ia-c 曲线的转折点或λa-c曲线对应的一阶导数极小点可以获得临界胶团浓度(cmc). 由于C12-3-C12·2Br在水溶液中强烈聚集, 利用λa-c曲线还可以获得其胶团结构松散度的信息.     

Tweezer分子的合成和对有机阴离子的配位效应

本文报道新的Ｔｗｅｅｚｅｒ（１）的合成，用＾１ＨＮＭＲ研究了新的Ｔｗｅｅｚｅｒ分子和对硝基苯甲酸盐的配位效应，结果表明它兴通过氢键，静电引力和芳环夹心堆叠作用而自动缔合。     

二维DNA晶体的程序化设计与自组装的研究进展

按照Watson-Crick的碱基配对原则，在理论上能够人工设计与合成DNA碱基序列并自组装成任何一维和二维结构的DNA晶体。DNA分子这种底端向上(bottom-up)的自组装模式为我们提供了一种精确合成纳米材料的方法。本文将从程序化设计、合成刚性的DNA分子瓦(DNA tile)、分子瓦自组装成二维DNA晶体以及二维DNA晶体作为模板在纳米技术中的应用等方面展开，简述这一新奇的并且有着潜在应用前景的研究领域的最新进展。     

邻苯二胺合钴氧合反应的研究Ⅰ 水溶液中配合物及其氧合配合物稳定常数的测定

自１９３８年Tsumaki报道犤１犦氧载体以来，这方面的研究已有很大进展犤２犦，只是理论研究居多。氧载体的氧合常数是氧载体研究中的一个重要参数，它的测定是氧载体研究中的一项重要内容，用pH电位法测定氧载体的氧合常数已有研究报道犤２～４犦，作者在研究中发现，邻苯二胺合钴（o－Phdn－Co）配合物在固相和水溶液中与O２反应时表现出很大差异，其反应产物的组成比分别为液相配合物Co∶O２＝２∶１，而固相配合物Co∶O２＝１∶２，为究其成因和进行理论探讨，有必要先测定其氧合常数。由于o－Phdn－Co配合物的配位常数也未见文献…     

金(Ⅲ)与杯[4]乙酯合钠(Ⅰ)超分子化合物: [Na(C60H80O12)]+[Au(SCN)4]-的合成、结构及性能

A novel super molecule [Na(C₆₀H₈₀O₁₂)]⁺[Au(SCN)₄]^- was obtained by extraction of calix[4] arene (L) for an aqueous solution containing [AuCl₄]^-, and NaCl into CH₂Cl₂. The crystal structure and properties of the title super molecule were characterized by single-crystal X-ray diffraction, IR and ¹H NMR spectra. The X-ray single crystal structure analysis shows that the crystal was Tetragonal system with space group P4/n and the unit cell parameters were as follows: a=2.880 8(18) nm, b=2.880 8(18) nm, c=2.292 4(5) nm, and final R indices [I>2σ(I)]: R₁=0.048 5, wR₂=0.106 1. CCDC: 243229.     

石墨烯负载高活性Pd催化剂对乙醇的电催化氧化

以石墨粉为原料, 采用Hummers法液相氧化合成了氧化石墨(GO), 然后用化学一步还原制得石墨烯负载钯催化剂. X射线衍射(XRD)、透射电镜(TEM)表征表明, Pd在石墨烯载体上有较好的分散度, 粒径为3-5 nm. 电化学活性面积(EASA)、循环伏安(CV)、计时电流(CA)和计时电位(CP)等电化学测试表明, 与传统Pd/Vulcan XC-72相比, Pd/石墨烯催化剂对碱性介质中乙醇电催化氧化的催化活性有了很大的提高.     

PREPARATION OF MICROGEL-EPOXY RESIN TWO-PHASE POLYMERS BY IN SITU POLYMERIZATION~*

Microgel-epoxy resin two-phase polymers were prepared by in situ copolymerization of ethylenic monomers with unsaturated polyesters. The choice of monomers and the effect of monomer concentration on microgel particle size were discussed. Agglomeration of particles played a significant role in the early stage of polymerization. The microgel dispersion in epoxy resin was stable after the finish of polymerization. Upon curing the particles remained well dispersed.     

水热法合成K0.5Bi0.5TiO3纳米陶瓷粉体

K_0.5Bi_0.5TiO₃(KBT)nanocrystalline particles were hydrothermally synthesized from Bi(NO₃)₃·5H₂O, TiO₂ and KOH. The crystal phase, chemical composition and microstructure were characterized by XRD, XRF, Raman scattering spectroscopy and TEM. The results indicated that the products were pure perovskite structured K_0.5Bi_0.5TiO₃ with chemical stoichiometry and perovskite structure. The TEM observation revealed that the particles possessed a feature of cubic shape and a nano-scale of about 40 nm. The KBT ceramics sintered at 1 040 ℃ from hydrothermal powders show higher density and better electric properties than that prepared by a solid-state reaction method.