Fabrication of three-dimensional crystalline microstructures by selective ion implantation and chemical etching

We present a new fabrication technique to produce three-dimensional (3D) microstructures on crystalline substrate using selective ion implantation and chemical etching. Localized lattice-damage layers at the specified depth beneath the substrate surface are formed by selective ion implantation. After etching out the partial surface regions and the buried lattice-damage layers by chemical etching, the 3D crystalline microstructures are produced. This technique is demonstrated on LiNbO₃ crystal to produce undercutting and free-standing microstructures, including microwire, microring, and microdisk. The measurement results of micro-Raman spectra show that the used fabrication process does not affect the original crystalline structure. The features of this technique include smooth structure surface, large undercutting range, and auto-etching stop. By using multiple implantations or repeating the proposed process several times, versatile 3D crystalline microstructures can be produced.     

Hydrothermal synthesis of LiMnO2 microcubes for lithium ion battery application

Two kinds of LiMnO₂ microcubes were successfully synthesized by hydrothermal method using solid or hollow Mn₂O₃ microcubes as precursors. One was made up of nanoparticles varying in size and the other was made up of interlaced polygonal nanoplates with the thickness of 70 nm. Both kinds of LiMnO₂ microcubes were characterized by X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. Charge–discharge curves were carried out to investigate their electrochemical properties. LiMnO₂ microcubes with interlaced nanoplates showed much better capacities than the ones with nanoparticles indicating it is more suitable for application in the lithium ion batteries. The former material could deliver the capacities of 197 and 134 mAh/g at 0.1 and 1 C, respectively. And its capacity fading after 50 cycles did not exceed 7 %. The excellent electrochemical performance of the former material could be ascribed to the smaller size which could shorten the path length for lithium ion transport and increase the electrode and electrolyte contact.     

生物添加剂对汽油机燃油经济性及废气排放影响的研究

将一种棕榈油提取物作为添加剂,加入汽油中以研究其对汽油机燃油经济性和排放品质的影响。针对市场上正使用的辛烷值为93#的高清洁汽油和乙醇汽油,通过发动机台架试验对加剂前后的汽油机性能指标进行了对比和分析．结果表明:加入此种添加剂后对各种汽油的燃油经济性有大幅改善作用,对乙醇汽油的效果尤甚。加剂后可以使乙醇汽油的燃油经济性与普通汽油完全一样。对于93#高清洁汽油,除了未燃碳氢(HC)略有上升外,其他排放物如氮氧化物 (Nox)、一氧化碳等有所减少, CO2排放有明显的改善。对于乙醇汽油,则HC和CO2略有上升。     

反相高效液相色谱法测定小鼠脑中的梓醇

建立了小鼠脑组织中梓醇的反相高效液相色谱检测方法.色谱柱为Agilent Zorbax SB-AqC18亲水色谱柱,流动相为水-乙腈(99.5:0.5,V/V).流速为1.0mL/min,检测波长为210nm,柱温为30℃.梓醇含量在0.8-40.8μg/mL范围内线性关系良好,相关系数r为0.9999.平均回收率为70.0％-77.4％,RSD≤5.9％.按照5mg/kg给药剂量,C57小鼠腹腔注射梓醇,结果显示2h后,0.29％的给药量可以通过血脑屏障进入脑组织.所建立的RP-HPLC法简便,快速,准确,可靠,能较好的应用于小鼠脑组织中梓醇的测定.     

High optical-efficiency integral imaging display with a gradient-aperture parallax barrier

We propose a one-dimensional integral imaging (1DII) display that consists of a display panel and a gradient-aperture parallax barrier. The gradient-aperture parallax barrier is symmetrical, and its slit widths gradually increase from both sides to the middle. The leftmost and rightmost slits are used to fix the viewing angle, whereas the other slits are used to increase the optical efficiency. A prototype of the proposed 1DII display is developed. Its optical efficiency is higher than that of the conventional display, but the viewing angles are the same.     

三维跨音速叶栅自动气动优化设计

应用三维叶栅自动设计参数化方法,选择E3约束的条件下进行了自动气动优化设计.优化后,最优叶栅的总压恢复系数比参考叶栅提高了0.8%,流量和出口气流角都在约束范围内.对优化结果的详细气动分析表明,叶栅性能有显著的改善,表明该算法具有良好的优化性能.     

新模式热电联产系统:联产供热的一个发展

1前言经济的迅猛发展，能源与水源的供需矛盾的突出，环保形势的严峻要求用能的“文明化”。文明用能应是跨世纪和新世纪用能战略的基本原则。文明用能的一个极重要方面就是对热能的文明利用问。热电联产是热能文明利用不可替代的途径。本文提出一种热电联产的新模式，旨在通过这种模式把联产供热规模化，大幅度地节约能源和水资源，减轻电能与热能的生产对环境的不利影响。最近中央提出的可持续发展战略，应成为我们今后技术研究的一个指导性方针。节约能源、水源和保护环境是这一战略的重要组成部分。在世界范围内，对节约资源保护环境问…     

Time-dependent and outflow boundary conditions for Dissipative Particle Dynamics

We propose a simple method to impose both no-slip boundary conditions at fluid-wall interfaces and at outflow boundaries in fully developed regions for Dissipative Particle Dynamics (DPD) fluid systems. The procedure to enforce the no-slip condition is based on a velocity-dependent shear force, which is a generalized force to represent the presence of the solid-wall particles and to maintain locally thermodynamic consistency. We show that this method can be implemented in both steady and time-dependent fluid systems and compare the DPD results with the continuum limit (Navier-Stokes) results. We also develop a force-adaptive method to impose the outflow boundary conditions for fully developed flow with unspecified outflow velocity profile or pressure value. We study flows over the backward-facing step and in idealized arterial bifurcations using a combination of the two new boundary methods with different flow rates. Finally, we explore the applicability of the outflow method in time-dependent flow systems. The outflow boundary method works well for systems with Womersley number of O(1), i.e., when the pressure and flowrate at the outflow are approximately in-phase.     

真空中两个点电荷间电势为零的点及其产生的场强

以真空中的两个点电荷为研究对象,讨论了空间坐标系下电势为零的点所形成的轨迹,以及电势为零的点的场强大小及方向;并通过MATLAB进行数值模拟,验证了结论的正确.总结了空间场强求解的一般方法和要点,明确了场强的空间分布性.     

ICP-AES测定南方离子型稀土精矿中稀土配分

采用 ICP- AES同时测定了南方离子型稀土精矿中 L a、Ce、Pr、Nd、Sm、Eu、Gd、Tb、Dy、Ho、Er、Tm、Yb、Lu和 Y组分的含量。选择了合适的分析线 ,确定了各元素的检出限为 0 .0 4— 13.6 μg/L,加标回收率为 90 %— 110 %。方法准确、快速、简便 ,已用于生产实践中