CeO_2修饰炭载体负载PdPt二元合金催化剂及其在甲酸氧化电催化中的应用

用CeO2修饰炭粉做载体,使用有机溶胶法还原PdPt二元合金的方法制备了一系列PdPt/CeO2-C催化剂.借助电化学测试,探讨催化剂中不同Pd与Pt原子比例的PdPt二元合金和不同含量的CeO2对于甲酸电氧化催化活性的影响.不断减少PdPt合金中Pt的比例可以促使甲酸氧化的起始电位前移,当Pd：Pt=15：1时氧化电流出现极值;同时,随着催化剂中CeO2含量的增加,催化剂对于HCOOH氧化的电流密度增加,当含量为15%时达到最大值.相对于Pd/C催化剂,在Pd15Pt1/15CeO2-C催化剂表面的甲酸氧化反应起始电位负移至少0.1V,氧化的电流密度提高60%以上.结合X射线衍射（XRD）,X射线光电子能谱（XPS）,透射电镜（TEM）和热重（TG）等测试数据可以发现,当极少量的Pt与Pd形成合金,Pt与Pd之间产生电子效应,使得合金表面HCOOH氧化的过电位降低;而CeO2的添加不仅有助于PdPt二元合金的分散,更有可能改变甲酸在PdPt表面的氧化反应路径,发挥双功能机理.     

Relative position determination of a lunar rover using high-accuracy multi-frequency same-beam VLBI

Multi-frequency same-beam VLBI means that two explorers with a small separation angle are simultaneously observed with the main beam of receiving antennas. In the same-beam VLBI, the differential phase delay between two explorers and two receiving telescopes can be obtained with a small error of several picoseconds. The differential phase delay, as the observable of the same-beam VLBI, gives the separation angular information of the two explorers in the celestial sphere. The two-dimensional relative position on the plane-of-sky can thus be precisely determined with an error of less than 1 m for a distance of 3.8×105 km far away from the earth, by using the differential phase delay obtained with the four Chinese VLBI stations. The relative position of a lunar rover on the lunar surface can be determined with an error of 10 m by using the differential phase delay data and the range data for the lander when the lunar topography near the rover and the lander can be determined with an error of 10 m.     

Highly Efficient Oxygen Reduction Reaction Fe-N-C Cathode in Long-durable Direct Glycol Fuel Cells

The oxygen reduction reaction in direct glycol fuel cells heavily relies on noble metal-based electrocatalysts. In this work, novel Pt group metal-free catalysts based on porous Fe-N-C materials are successfully synthesized as catalysts with high activity and durability for the cathode oxygen reduction reaction (ORR). Through the encapsulation of NH₄SCN salt, the surface elements and pore structure of the catalyst are effectively changed, and the active sites of Fe effectively are increased. The half-wave potential of the best Fe-N-C catalyst was –0.02 V vs. Hg/HgO in an alkaline environment. The porous Fe-N-C catalyst possesses a large specific surface area(1158 m²/g) and shows good activity and tolerance to glycol. The direct glycol fuel cell with the Fe-N-C cathode achieved a maximum power density of 62.2 mW/cm² with 4 mol/L KOH and 4 mol/L glycol solution at 25 °C and maintained discharge for more than 250 h at a 50 A/cm² current density.     

Preparation and Properties of Electrospun Sheath-core Modified-PMMA Nanofibers with Photoluminescence and Photochromic Functions

Multi-functional nanofibers are playing an important role in the optical field, and are widely used in fluorescence indication, product anti-counterfeit identification and smart clothing. Nanofibers with photoluminescence and photochromic functions are already attracting more interest from researchers. In this work, based on electrospun technology, the modified-PMMA nanofibers[PMMA=poly(methyl methacrylate)] with photoluminescence and photochromic functions were prepared through the design of the sheath-core structure(SCNFs 1-4). Compared with other samples, SCNF-4 shows outstanding photoluminescence and photochromic functions. SCNF-4 can produce green light and its fluorescence intensity and fluorescence lifetime can reach 7144 a.u. and 1031.32 μs, respectively. In photochromic functions, SCNF-4 can show purple in 1 min under the 365 nm ultraviolet light, and the color can be preserved for more than 4 h under the sunlight. When SCNF-4 is irradiated by far infrared light, the color of the samples can fade quickly in 40 s. Under the irradiation of ultraviolet light of different wavelengths, SCNF-4 can display multi-color fluorescence and achieve a reversible transition between white and purple. The design of the sheath-core structure realizes the complementarity of photoluminescence and photochromic functions of the electrospun modified-PMMA nanofibers, which is important to promote the wide application of multi-functional nanofibers in the optical field.     

Structure of Cytochromec and Its Platinum-modified Derivatives by Fourier Transform Infrared Spectroscopy

ＳｔｒｕｃｔｕｒｅｏｆＣｙｔｏｃｈｒｏｍｅｃａｎｄＩｔｓＰｌａｔｉｎｕｍ┐ｍｏｄｉｆｉｅｄＤｅｒｉｖａｔｉｖｅｓｂｙＦｏｕｒｉｅｒＴｒａｎｓｆｏｒｍＩｎｆｒａｒｅｄＳｐｅｃｔｒｏｓｃｏｐｙＪＩＡＮＧＬｉ－ｊｕａｎａ，ＳＵＮＷｅｉ－ｙｉｎａ，ＦＡＮＧＪ...     

毛细管电泳法测定人发中铝

用毛细管离子分析 (CIA)法 ,采用 10mmol·L- 1咪唑为背景电解质 ,4 0 %甲醇为选择性改性剂 ,在 pH 2 .5、分离电压为 2 5kV、柱温为 2 2℃的电泳条件下 ,采用间接紫外检测 (2 14nm ) ,在5min内测定了人发中铝 ,方法简便、快速、灵敏度高、重现性好、测定成本低     

冠醚共缩聚物的合成与性能（Ⅱ）

采用２，６－二羟甲基苯酚类化合物分别与单苯并冠醚（Ｂ１５ＣＳ、Ｂ１８Ｃ６）和Ｍ苯并冠醚（２Ｂ１８Ｃ６、２Ｂ２４Ｃ８、２Ｂ３０Ｃ１０）在酸催化下缩聚，合成了两个系列冠醚共缩聚物．这些聚合物Ｍ＝１２００—４５００，可溶于氯仿等溶剂，萃取性能和络合选择性均有所提高．作为树脂使用，动态吸附容量为０．０５—０．１５ｍｍｏｌ／ｇ，并有较好的色谱特性．     

氟离子与磺化反应改性多壁纳米碳管催化剂的制备、表征及催化酯化反应合成油酸甲酯性能

通过高温浸渍法,对多壁纳米碳管进行了氟离子与浓硫酸磺化反应修饰改性处理,制备了一种新型Lewis酸型催化剂F^--SO₄^2-/MWCNTs,并通过透射电镜、拉曼光谱、X射线光电子能谱、吡啶吸附红外光谱、X射线荧光光谱、X射线衍射和NH₃程序升温脱附等表征手段对其的物理化学性能进行了表征分析,进而对多壁纳米碳管经F-与浓硫酸磺化反应修饰改性后所出现的结构与催化性能变化的内在影响规律进行了探索。以F^--SO₄^2-/MWCNTs为催化剂,以甲醇和油酸为原料,对其在应用于催化酯化反应合成油酸甲酯过程中的活性进行了研究。结果表明：当反应温度为65℃、醇油物质的量之比为12：1、催化剂质量占反应物总质量的0.9%、反应时间为6 h,油酸的转化率最高,达到了90%。高催化活性可归因于随着氟元素的加入,提高了SO₄^2-的插层作用效果,从而增加了酸性活性位的数量;此外,S=O键具有电子诱导效应,而F-有强负电性,两者之间发生强烈的相互作用后形成了F-S键,使S=O的吸电子效应大幅度增强,从而加剧了F^--SO₄^2-/MWCNTs催化剂的体系电荷不平衡趋势,导致催化剂中的正电荷过剩,使催化剂中的酸性活性位以Lewis酸为主,有效的避免了单纯磺化反应作用所生成的催化剂的酸性活性位以Brönsted酸型为主,而易在富含水的反应介质中发生水合作用而降低,甚至失去催化活性的现象发生。     

Effects of High Salt Concentration and Residue on Copper and Aluminum Corrosion

Traditional researches on metal corrosion under salt solutions deposit conditions are usually carried out by visual, electron microscopic observations and simple electrochemical measurement via a traditional one-piece electrode. These techniques have difficulties in measuring localized corrosion that frequently occur in inhomogeneous media. This paper reports the results from the experiments using specially shaped coupons and a relatively new method of measuring heterogeneous electrochemical processes, namely, the wire beam electrode(WBE). Preliminary results from copper and aluminum corrosion in highly concentrated sodium chloride solutions with and without solid deposits show that the method is useful in simulating and studying corrosion especially localized corrosion in pipelines.     

蒸汽活化生物质焦吸附模拟烟气中SO2和NO的研究

以麦秆和稻壳生物质为研究对象,在不同的热解温度、热解速率以及蒸汽活化温度条件下制备了生物质焦,采用比表面积与孔隙度分析仪测定生物质焦的比表面积和孔隙结构参数。利用固定床吸附装置,研究了热解温度、热解速率、活化温度和模拟烟气中SO₂和NO浓度等因素对生物质焦吸附SO₂和NO性能的影响。结果表明,蒸汽活化可以显著提高生物质焦的BET比表面积、D-R比表面积、D-R微孔容积和总孔容,降低其平均孔径,并显著增加蒸汽活化生物质焦对SO₂与NO吸附的起始穿透时间和吸附量。快速热解下制得的蒸汽活化焦对SO₂和NO的吸附效果优于慢速热解,热解温度为873 K的蒸汽活化焦的吸附性能明显好于热解温度为673与1 073 K的蒸汽活化焦。在973~1 173 K下,随着蒸汽活化温度的提高,蒸汽活化生物质焦对SO₂和NO的吸附量呈现先上升后下降的趋势。随着模拟烟气中SO₂与NO浓度的降低,蒸汽活化生物质焦对SO₂与NO吸附的起始穿透时间延长,但相应的SO₂和NO吸附量下降。在873 K、快速热解和1 073 K条件下制得的蒸汽活化麦秆焦对SO₂和NO吸附量最大,其值分别为109.02和21.77 mg/g。