Ba0.6Sr0.4TiO3/聚偏氟乙烯-聚甲基丙烯酸甲酯复合材料的制备及其介电性能

采用流延热压工艺制备Ba_0.6Sr_0.4TiO₃(BST)/聚偏氟乙烯(PVDF)?聚甲基丙烯酸甲酯(PMMA)复合薄膜,研究了PMMA含量对复合材料微观组织结构和介电性能的影响规律。结果表明,BST相能够均匀分散在聚合物基体中,归因于PMMA与PVDF良好的相容性,2种聚合物之间的界面不分明;随着PMMA含量的增加,复合材料的介电常数先降低后升高,耐击穿强度和介电可调性先增加后减少。PMMA含量(体积分数)为15%的BST/PVDF?PMMA₁₅复合材料的综合性能最佳:介电常数为23.2,介电损耗为0.07,耐击穿强度为1412 kV·cm^-1,在550 kV·cm^-1偏压场下,介电可调性为26.2%。     

新型钒卤代过氧化物酶模型化合物的合成结构及仿生催化活性

模拟卤代过氧化物酶活性中心钒的配位环境设计合成了新的蝎型聚吡唑硼酸盐钒氧化合物VO(HB(3,5-Me<,2> pz)<,3>)(3,5-Me<,2>pz)(HOOCCH<,2>CH<,2>COO)(1)和VO(HB(3,5-Me<,2>pz)<,3>)(3,5-Me<,2> pz)(C<,5>H<,4>NCOO)(2...     

Lu2O3纳米粉体和透明陶瓷中掺杂Nd3+的局域结构研究

利用扩展X射线吸收精细结构光谱(EXAFS)研究了不同掺杂浓度Nd3+:Lu2O3纳米粉体和透明陶瓷中Nd3+的局域结构.结果表明,在不同条件下Nd3+均以固溶取代Lu3+的方式进入Lu2O3基质晶格,掺杂Nd3+原子的第一配位键长约为0.225 nm,小于Nd2O3纳米粉中Nd-O第一近邻键长0.251 nm,而大于...     

炭化处理高烧失量硅藻土及对天然橡胶的性能补强

通过缺氧条件下煅烧富含有机质的内蒙硅藻土制备了一种含炭的硅藻土,并将这种炭化硅藻土代替部分炭黑用于天然橡胶的补强.采用红外光谱、X射线衍射、热分析、扫描电子显微镜、能谱和万能材料试验机对炭化硅藻土进行结构表征和力学性能测试.结果表明,于600℃进行2h的缺氧锻烧处理后,硅藻土中的有机质已经转化为无定形碳紧密吸附于硅藻土...     

生物质水热液化和炭化产物特性研究

分别选取稻杆,水葫芦,纤维素和木聚糖（生物质模型化合物）为原料,在反应釜中进行水热液化（300℃,30min）和水热炭化（220℃,4h）实验,对液化产物和炭化产物进行分析。结果表明,稻杆获得重油产率达最大值21.62%。纤维素,木聚糖和水葫芦的重油产率分别为15.00%,11.61%和12.19%。生物质化学组分对其重油产率和组分有着一定的影响。液态产物分别利用总有机碳分析仪（TOC）和气质联用仪（GC-MS）进行测定。表明重质油中主要含有酮类,酚类,醛类,醇类和少量的酸类化合物。利用扫描电镜（SEM）和透射电镜（TEM）对水热炭化固态产物进行了形貌与结构表征,得到具有核壳结构的纳米微球。纤维素,水葫芦和稻杆有着较高的焦炭产率,最后对木聚糖的碳微球形成机理进行初探。     

高光谱图像技术检测黄瓜叶片的叶绿素叶面分布

以黄瓜叶片为材料,利用高光谱图像技术结合独立分量法(ICA),研究了叶绿素浓度叶面分布的快速、无损检测方法.用高光谱相机采集了80片黄瓜叶子的高光谱图像(408～1117 nm),利用ICA方法提取了高光谱图像的8个独立分量信号,通过逐步线性回归(SMLR)优选出第1、第2和第5个ICA信号,并在此基础上建立了叶绿素浓...     

Thermodynamic Properties and Relative Stability of Polyhydroxylated Dibenzo-p dioxins Calculated by Density Functional Theory

In this work, partial thermodynamic properties of polyhydroxylated dibenzo-p-dioxins (PHODDs) are calculated by density functional theory (DFT) with the Gaussian 03 program at the B3LYP/6-311G** level. By comparing the total energy Eθ values, it is found that two types of hydrogen bonds exist in PHODDs, one between a hydroxyl and the parent compound (dibenzop-dioxin) with bond energy of approximate 15.7 kJ/mol and the other between two ortho hydroxyl groups with higher bond energy of about 18.3 kJ/mol. Hydrogen bonds have an effect on the conformation stability. On the basis of evaluating the strength of these two types of hydrogen bonds, 75 most stable congeners are ascertained. The relations of calculated thermodynamic parameters (total energy Eθ, zero-point vibrational energy ZPE, correction value of thermal energy Ethθ, heat capacity at constant volume CVθ) with the number and position of hydroxyl substitution (NPHOS) are also discussed. The results show that the NPHOS models can be used to predict the thermodynamic properties for PHODD congeners. In addition, the values of molar heat capacities at constant pressure (Cp,m) from 200 to 1000 K for PHODD congeners are calculated, and the temperature dependence relation of Cp,m is obtained with the least-squares method.     

La2O3对Pd密偶催化剂性能的影响

采用浸渍法制备了不同La2O3含量的Pd密偶催化剂.使用低温N2吸附-脱附、X射线衍射、H2程序升温还原、CO化学吸附和X射线光电子能谱等技术考察了La2O3对催化剂性能的影响.模拟汽车尾气条件考察了催化剂上丙烷的转化活性.活性测试结果表明,La2O3的添加能显著提高催化剂对丙烷的转化活性和催化剂的热稳定性.H2-TP...     

A DFT Study on the Stable Structures and Dissociation Mechanism of C3O6 Cluster

Using geometrical optimization and DFT method at the B3LYP/6-31G (d) level, nineteen equilibrium geometries were identified, and three transition states of dissociation reaction of C3O6 clusters were also found. The vibrational frequencies and intrinsic reaction coordinate (IRC) verification at the same level were computed to verify the transitions. And then we calculated the dissociation energies and analyzed the dissociation channels. The computational results show that the dissociation energies of C3O6 isomers relative to three CO2 are between 1.509 × 103 and 10.61 × 103 kJ·kg-1, and the energy barriers of the reactions are 92.857, 131.138 and 185.793 kJ·mol-1. Both the high dissociation energies and high energy barriers show that C3O6 clusters studied in this paper are stable enough to be used as high-energy-density materials.     

多级孔WO3/ZrO2固体酸催化剂的制备与表征

采用复合模板表面活性剂辅助水热法一步合成了WO3/ZrO2多级孔固体酸催化剂,并应用X射线衍射、低温N2吸附-脱附、拉曼光谱及NH3程序升温脱附对催化剂进行了表征.结果表明,WO3的引入使得WO3/ZrO2催化剂的比表面积增大,表面的酸中心明显增加.在乙酸和正丁醇的酯化反应中,WO3/ZrO2多级孔固体酸催化剂表现出较...