单色光束的衍射度

受近期Gawhary和Severini在Opt.Lett.33,1360(2008)一文中引入的光束近轴度的启发,定义了一个独立于光束近轴度的衍射度参数来描述单色光束的衍射扩散程度,所定义的衍射度只依赖于光束的角谱分布,并可以定量比较不同光束的衍射扩散程度.     

用瑞利激光雷达16年观测数据分析合肥地区大气密度分布特征

介绍了L625瑞利激光雷达系统结构以及基于瑞利散射理论探测大气分子数密度的原理.提出了反复迭代修正大气透过率的计算方法,并通过模拟仿真验证了该算法的可靠性.通过误差分析得到影响大气分子密度不确定度的主要因素为回波信号信噪比以及参考点处大气分子数密度值,给出了回波信号误差产生的主要来源以及参考点选取方法.最后,分析了激光雷达16年观测数据反演的结果,得到合肥地区大气分子数密度的月份以及年份分布状况,结果表明:中层大气分子数密度分布呈现明显的季节性分布特征,冬季分布稀疏,夏季分布密集,随年份分布则较为平稳.通过将统计平均得到的密度廓线与1976美国标准大气模式比对分析,发现由激光雷达观测反演得到的结果较模式值大,二者的比值在1.05～1.13之间.     

分光计调整方法的改进及白光色散研究

普通物理实验中使用分光计观察白光散射,测量三棱镜顶角,最小偏向角等。但在测量前需借助三棱镜调整分光计,有人通过理论分析发现传统的调节方法存在误调和误差,并提出了改进的实验调整方法。本文我们通过实验来验证该方法是否可行,并在实验中发现了其它的问题。     

Back contact–absorber interface modification by inserting carbon intermediate layer and conversion efficiency improvement in Cu2ZnSn(S,Se)4 solar cell

Carbon layers have been employed as intermediate layers between Mo back contact and Cu₂ZnSn(S_1–xSe_x)₄(CZTSSe) absorber film prepared by sol–gel and post‐selenization method. Carbon layers with appropriate thickness can significantly inhibit the formation of MoSe₂ and voids at bottom region of the absorber, and therefore reduce the series resistance remarkably. The conversion efficiency can be boosted by the introducing of the carbon layer from 6.20% to 7.24% by enhancement in short current density, fill factor and open voltage in comparison to the reference sample without carbon layer. However, excess thickness of carbon layer will worse device performance due to the deteriorated absorber crystallinity. In addition, the time‐resolved photoluminescence analysis shows that inserting the carbon layer with suitable thickness does not introduce recombination and lower minority lifetime. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

光学频率梳非线性传输及其在相位噪声探测中的应用

光纤传递链路中相位噪声探测是基于光纤的精确射频标准传递系统中重要组成部分。为解决光纤链路相位噪声探测中节点反射干扰的问题, 本文基于广义非线性薛定谔方程, 理论上研究了窄带光学频率梳在色散位移光纤中的非线性光学传播特性。在理论分析的基础上, 结合密集波分复用架构, 提出了一种基于锁模光学频率梳进行光纤传递射频信号的相位噪声探测新技术, 克服了节点反射干扰, 给出了初步实验验证。     

Toxic effects of anticancer drug doxorubicin to bovine serum albumin evaluated by spectroscopic methods

The aim of this present work is to investigate the interaction between doxorubicin and bovine serum albumin (BSA) in simulated physiological conditions by spectroscopic methods to reveal potential toxic effects of the drug. The results reflected that doxorubicin made the fluorescence quenching of BSA through a static quenching procedure. The binding constants at 293, 298, and 303 K were obtained as 2.53 × 10⁵, 8.13 × 10⁴, and 3.59 × 10⁴ M^–1, respectively. There may be one binding site of doxorubicin on BSA. The thermodynamic parameters indicated that the interaction between doxorubicin and BSA was driven mainly by hydrogen bonding and electrostatic forces. Synchronous fluorescence spectra and circular dichroism (CD) results showed doxorubicin binding slightly changed the conformation of BSA with secondary structural content changes. Förster resonance energy transfer (FRET) study revealed high possibility of energy transfer with doxorubicin-Trp-212 distance of 3.48 nm. The results of the present study may provide valuable information for studying the distribution, toxicological and pharmacological mechanisms of doxorubicin in vivo.     

主被动光学图像融合技术研究

本文应用扫描式激光成像雷达获取试验数据并实现对激光数据的三维成像处理,给出了基于目标特征的激光雷达图像与被动光学图像的数据融合方法,实现了激光图像和光学图像间的三维融合。试验结果表明,本文所提出的基于目标特征的两种不同质图像间的融合方法是可行的,融合后的图像具有丰富的光谱信息和三维立体信息。     

Thermal stability of amorphous SiOC/crystalline Fe composite

We examined the thermal stability of amorphous silicon oxycarbide (SiOC) and crystalline Fe composite by in situ and ex situ annealing. The Fe/SiOC multilayer thin films were grown via magnetron sputtering with controlled length scales on a surface-oxidized Si (100) substrate. These Fe/SiOC multilayers were in situ or ex situ annealed at temperature of 600 °C or lower. The thin multilayer sample (~10 nm) was observed to have a layer breakdown after 600 °C annealing. Diffusion starts from low groove angle triple junctions in Fe layers. In contrast, the thick multilayer structure (~70 nm) was found to be stable and an intermixed layer (Fe_xSi_yO_z) was observed after 600 °C annealing. The thickness of the intermixed layer does not vary as annealing time goes up. The results suggest that the Fe_xSi_yO_z layer can impede further Fe, Si and O diffusion, and assists in maintaining morphological stability.     

Theoretical analysis of the mode coupling induced by heat of large-pitch micro-structured fibers

In this paper,a theoretical model to analyze the mode coupling induced by heat,when the fiber amplifier works at high power configuration,is proposed.The model mainly takes into consideration the mode field change due to the thermally induced refractive index change and the coupling between modes.A method to predict the largest average output power of fiber is also proposed according to the mode coupling theory.The largest average output power of a large pitch fiber with a core diameter of 190 μm and an available pulse energy of 100 mJ is predicted to be 540 W,which is the highest in large mode field fibers.