Synthesis and comparative study of the heterocyclic rings on liquid crystalline properties of 2,5-aryl-1,3,4-oxa(thia)diazole derivatives containing furan and thiophene units

A series of heterocyclic liquid crystalline compounds containing 1,3,4-oxadiazole/thiadiazole, furan and thiophene units were synthesised and characterised by means of electrospray ionisation-mass spectrometry (ESI-MS), high-resolution mass spectroscopy (HRMS), ¹H nuclear magnetic resonance (NMR) and ¹³C NMR. The thermal behaviours were investigated by differential scanning calorimetry (DSC) and polarised optical microscopy (POM). The effect of the 1,3,4-oxadiazole, 1,3,4-thiadiazole, furan, thiophene and benzene rings on the liquid crystalline properties was discussed briefly in context with the geometrical and electronic factors. The results showed that the tendency to form mesophases follows the sequence: 1,4-disustituted benzene >2,5-disubstituted thiophene >2,5-disustituted furan and 1,3,4-thiadiazole >1,3,4-oxadiazole.     

Liquid crystalline behaviour of hydrazide derivatives containing alkoxyazobenzene

Two series of dissymmetric hydrazide derivatives containing alkoxyazobenzene with nitro terminal group and octyloxy terminal group, N-4-alkoxyphenyl-N′-4-((4-nitrophenyl)azophenyl) benzohydrazide (Bn-NO₂, n indicates the number of carbon atoms) and N-4-octyloxyphenyl-N′-4-((4-octyloxyphenyl)azophenyl) benzohydrazide (B8-B8), were designed and synthesised, and their liquid crystalline properties were investigated by means of differential scanning calorimetry, polarised optical microscopy and wide-angle X-ray diffraction. It was found that B8-B8 with octyloxy terminal chains displayed monolayer smectic C phase, whereas Bn-NO₂ with nitro terminal group displayed SmA_d phase, and intermolecular hydrogen bonding was confirmed as the driving force. In addition, the effect of hydrogen bonding, dipole–dipole interactions and steric hindrance effect on the liquid crystalline structures were also discussed.     

Synthesis and liquid crystalline properties of substituted 2,5‐diaryl 1,3,4‐oxadiazole derivatives without flexible chains

A series of new compounds based on aromatically 2,5‐disubstituted 1,3,4‐oxadiazoles without flexible chains, formulated as p‐R–C₆H₄–(OC₂N₂)–(p‐C₆H₄)₂–R′ with (i) R = CH₃O, R′ = CH₃O, CH₃S, F, H (Ia–Id), (ii) R = CH₃S, R′ = CH₃O, CH₃S, F, H (IIa–IId) and (iii) R = F, R′ = CH₃O, CH₃S, F, H (IIIa–IIId) (p‐C₆H₄ and OC₂N₂ represent a p‐phenylene spacer and a 1,3,4‐oxadiazole ring, respectively), were synthesised and characterised by ¹H and ¹³C NMR, MS and HRMS techniques. Mesomorphic properties were investigated using differential scanning calorimetry and polarizing optical microscopy. All of the target compounds (except Id, IId, IIIc and IIId) exhibited an enantiotropic nematic mesophase with high melting temperatures. The liquid crystalline properties of these compounds were influenced greatly by polarity, steric factors and positions of the terminal groups. The effect of the terminal groups on the liquid crystal properties is discussed.     

Recombinant Expression and Characterization of an Organic-Solvent-Tolerant α-Amylase from Exiguobacterium sp. DAU5

The enzyme from halophilic microorganisms often has unique properties such as organic-solvent-tolerance. In this study, a novel organic-solvent-tolerant α-amylase gene was cloned from the mild halophile Exiguobacterium sp. DAU5. The open reading frame (ORF) of the enzyme consisted of 1,545 bp and encoded 514 amino acids, the primary sequence revealed that it belongs to the glycoside hydrolase (GH) family 13. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) showed an AmyH monomer of 57 kDa. The enzyme exhibited maximal activity at 40 °C in pH?8.5 glycine–NaOH buffer, and the activity was strongly inhibited by Zn²⁺, Cu²⁺, and Fe²⁺. The α-amylase AmyH exhibited high hydrolysis activity toward soluble starch, and the major hydrolysis products were maltose, maltotriose, and maltopentaose; the AmyH could not efficiently hydrolyze oligosaccharides smaller than maltoheptaose, nor could it act on the β-1,4 or α-1,6 glucosidic bonds in xylan or pullulan, respectively. In addition, the α-amylase exhibited better tolerance to organic solvents, as it was stable in the presence of dimethylsulfoxide (DMSO), methanol, ethanol, and acetone. Base on all of these results, the enzyme could be useful for practical application in the bakery industry and in biotechnological processes that occur in the presence of organic solvents.     

Facile synthesis of gemini surface-active ATRP initiator and its use in soap-free AGET ATRP mini-emulsion polymerisation

A novel cationic gemini surfactant has been readily synthesised in 70 % total yield. The functional gemini surfactant can act both as an emulsifier and an atom transfer radical polymerisation (ATRP) initiator in mini-emulsion polymerisation of methyl methacrylate (MMA), in which no other emulsifier was required. 1-(Dimethylamino)dodecane (N,N-dimethyldodecylamine, DMDA) was found to be a good ligand in the activator generated by electron transfer (AGET) ATRP reaction. Kinetic studies indicated that the polymerisation featured controlled/living radical polymerisation.     

辉光放电电解等离子体引发合成高吸水性树脂

以淀粉、丙烯酸和腐殖酸钠为原料,以N,N-亚甲基双丙烯酰胺为交联剂,采用辉光放电电解等离子体在水溶液中引发聚合制备淀粉-聚丙烯酸/腐殖酸钠复合高吸水树脂。考察了放电电压、放电时间,单体与淀粉质量比、腐殖酸钠含量、交联剂、温度及中和度对树脂吸水率的影响。用红外光谱和热重分析分别对树脂进行了结构表征和稳定性测试,结果表明,在优化合成条件下,所得的复合树脂具有较高的吸水性和耐盐性,常温下对蒸馏水吸收量为862g/g,对0.9%NaCl溶液的吸收量为69g/g。     

Determination of Cr(VI) by portable tungsten coil electrothermal atomic absorption spectrometer after surfactant-assisted dispersive liquid-liquid microextraction

As a new developed instrument, a portable tungsten coil electrothermal atomic absorption spectrometer (W-coil ET-AAS) was first coupled with surfactant assisted dispersive liquid–liquid microextraction (SA-DLLME) to improve its analytical performance and expand its applications in this work. SA-DLLME was very simple, rapid and the extraction efficiency was considerably improved by the effect of surfactant, which was suitable to be coupled with the portable instrument in field analysis. After SA-DLLME, concentrated chromium in organic phase was directly determined on W-coil atomiser. The influence factors relevant to SA-DLLME and instrumental conditions were studied systematically. Under the optimal conditions, the limit of detection (LOD) for Cr(VI) was 0.016 µg L^?1, with sensitivity enhancement factor (EF) of 107. The relative standard deviation (RSD) for seven replicate measurements of 0.5 µg L^?1 of Cr(VI) was 4.6%. The recoveries for the spiked samples were in the acceptable range of 96.8–104%. The rapid, simple and high effective method greatly improved the sensitivity of this portable spectrometer for the determination of Cr(VI) and was applied to the analysis of ultra-trace Cr(VI) in real and certified water samples with satisfactory results.     

Biomimetic synthesis of calcium carbonate with different morphologies under the direction of different amino acids

Using three different amino acids (AAs) as organic matrices, including the highly nonpolar hydrophobic l-valine, the positively charged l-arginine and the less polar uncharged l-serine, calcium carbonate (CaCO₃) with different morphologies and polymorphs were synthesized by a facile gas diffusion reaction based on biomimetic strategy. Compared with the control cubic calcite obtained in the absence of AAs, the product from l-valine was cubic calcite aggregates assembled by nano-platelets. The product from l-arginine was spherical vaterite aggregates assembled by spherical nanoparticles. The product from l-serine was the mixture of cubic calcite and spherical vaterite. The structures and properties of the side chains of the AAs exerted the significant effects on the nucleation and growth of the CaCO₃. The formation mechanisms of the CaCO₃ in the presence of AAs are preliminarily discussed. The results suggest that the polymorphs and morphologies of the inorganic nanomaterials might be easily adjusted through the careful selection of the organic matrices.     

Preparation and photocatalytic antibacterial property of nitrogen doped TiO2 nanoparticles

Nitrogen doped TiO₂ (N-TiO₂) nanoparticles with about 30 nm in size were produced by a sol–gel method and characterized respectively by UV–vis, X-ray diffraction (XRD), Transmission electron microscopy, X-ray photoelectron spectroscopy (XPS). Their photocatalytic antibacterial properties were evaluated by the antibacterial ratio against Escherichia coli in dark and under simulated sunlight respectively. The XRD pattern showed that the doped nano-TiO₂ was mainly composed of anatase phase. The XPS spectra of the N-TiO₂ sample indicated that TiO₂ was doped by nitrogen atom. The nitrogen doping created a new N 2p state slightly above the valence band top consists of O 2p state, and this pushes up the valence band top and decreased the band gap. Which leaded to the absorption edge was red-shifted to the visible light region of UV–vis spectra of nitrogen doped nano-TiO₂ comparing with pure nano-TiO₂. The antibacterial percentage of N-TiO₂ against E. coli reached to 90 % under simulated sunlight for 2 h, which was much better than that in dark, also than that of pure nano-TiO₂. The photo-catalytic antibacterial activity was activated under visible light. The structure and integrity of cell wall and cell membrane were destructed, and even caused the bacteria death.