Catalytic wet air oxidation of aromatic compounds: degradation in molybdovanadophosphoric polyoxometalates micellar system under room temperature conditions

Catalytic wet air oxidation process, enable to eliminate organic pollutants with non toxic by-product formation, was investigated in micellar system under room condition. Degradation of a series of aromatic compounds, including aromatic hydrocarbons, benzyl alcohol, benzaldehyde, benzoic acid, and some N-containing compounds was carried out based on molybdovanadophosphoric polyoxometalates [(C₁₆H₃₃)N(CH₃)₃]_3+x PV _x Mo_12?x O₄₀ (x = 1, 2, 3) catalysts and surfactants. Outstanding results (60–96 % degradation efficiencies) were achieved for most of the tested substrates. And the POM micellar catalysts have an excellent stability and can be used as heterogeneous catalysts for about six times.     

Adsorption behavior of uranium on polyvinyl alcohol-g-amidoxime: Physicochemical properties, kinetic and thermodynamic aspects

Amidoxime-based adsorbents are widely studied as the main adsorbent in the recovery of uranium from seawater.However,the adsorption rate and loading capacity of such adsorbents should be further improved due to the economic viability consideration.In this paper,polyvinyl alcohol functionalized with amidoxime(PVA-g-AO)has been prepared as a new adsorbent for uranium(Ⅵ)adsorption from aqueous solution.The physicochemical properties of PVA-g-AO were investigated using infrared spectroscopy(IR),scanning electron microscope(SEM),X-ray diffraction(XRD),and X-ray photoelectron spectroscopy(XPS).Results showed that the ligand monomers were successfully grafted onto the matrixes.The XRD and XPS analysis showed that uranium was adsorbed in metal ionic form rather than in crystal form.Uranyl(U(Ⅵ))adsorption properties onto PVA-g-AO were evaluated.The adsorption of U(Ⅵ)by PVA-g-AO was fast,with an equilibrium time of less than 50 min.Additionally the maximum adsorption capacity reached 42.84 mg/g at pH 4.0.     

Alginate‐Based Microcapsules with a Molecule Recognition Linker and Photosensitizer for the Combined Cancer Treatment

A reactive template method was used to fabricate alginate‐based hydrogel microcapsules. The uniform and well‐dispersed hydrogel capsules have a high drug loading capacity. After they are coated by a folate‐linked lipid mixture on the surface, the capsules possess higher cell uptake efficiency by the molecule recognition between folate and the folate‐receptor overexpressed by the cancer cells. Moreover, in this bioconjugate, the lipid could remarkably reduce the release rate of hydrophilic doxorubicin from the hydrogel microcapsules and encapsulate the hydrophobic photosensitizer hypocrellin B. The biointerfaced capsules could be used as drug carriers for combined treatment against cancer cell proliferation in vitro; this was much more effective than chemotherapy or photodynamic therapy alone.     

Sulfonated carbon catalyzed oxidation of aldehydes to carboxylic acids by hydrogen peroxide

Sulfonated carbon as a strong and stable solid acid catalyst exhibited excellent catalytic performance in various acid-catalyzed reactions. Here, sulfonated carbon, as catalyst for oxidation reaction, was prepared via the carbonization of starch followed by sulfonation with concentrated sulfuric acid. N₂ physisorption, X-ray diffraction, Fourier transform infrared spectroscopy, X-ray fluorescence and acid-base titration were used to characterize the obtained materials. The catalytic activity of sulfonated carbon was studied in the oxidation of aldehydes to carboxylic acids using 30 wt% H₂O₂ as oxidant. This oxidation protocol works well for various aldehydes including aromatic and aliphatic aldehydes. The sulfonated carbon can be recycled for three times without obvious loss of activity.     

Direct conversion of fructose-based carbohydrates to 5-ethoxymethylfurfural catalyzed by AlCl3·6H2O/BF3·(Et)2O in ethanol

Direct conversion of fructose-based carbohydrates to 5-ethoxymethylfurfural (EMF) catalyzed by Lewis acid in ethanol was investigated. It was found that BF₃·(Et)₂O was favorable for 5-hydroxymethylfurfural (HMF) etherification to EMF. BF₃·(Et)₂O combination with AlCl₃·6H₂O with the molar ratio of 1 was an effective catalyst system for synthesis of EMF from fructose-based carbohydrates. 55.0%, 45.4% and 23.9% of EMF yields were obtained from fructose, inulin and sucrose under optimized conditions, respectively.     

Synthesis and Characterization of Iron Nanowires

The iron nanowires can be fabricated via the process in which sodium borohydride reduces iron salts in external magnetic field. The iron nanowires are found to be covered by passivated layers of iron oxide which prevent the oxidation of iron nanowires. In this process, the boron will include in iron nanowires. The average length and diameter of iron nanowires is around 1.2 micrometers and 60 nanometers, respectively. According to ICP results, the contents of B and Fe are about 1.98 wt% and 87.04 wt%, respectively, in iron nanowires. A wide variety of equipment is used to investigate the morphological, microchemical, and structural characteristics of the newly synthesized iron nanowires ––– e.g., XRD, FE‐SEM, HR‐TEM, VSM and XANES. XANES analysis indicates the boron in iron nanowires exists in the form of B₂O₃. The saturation magnetization and the coercive force of iron nanowires are 157.93 emu/g and 9.74 Oe, respectively. In‐situ images of synthesized iron nanowires during reduction process in magnetic field are observed by NSRRC transmission X‐ray microscope. Thus, this study develop a novel process to produce iron nanowires with large quantitates and can control its length and diameter by various the concentration of precursors for various applications.     

Sensitive Determination of 2‐Methoxyestradiol in Pharmaceutical Preparations and Biological Fluids by KMnO4‐Na2SO3 Chemiluminescence System

A simple and novel flow‐injection chemiluminescence (FI‐CL) method was established for the determination of 2‐Methoxyestradiol (2‐ME) in pharmaceutical preparations and biological fluids. The method was based on the significant enhancement of the CL from the KMnO₄‐Na₂SO₃ reaction by 2‐ME in acidic medium. Under optimized conditions, the CL intensity was correlated linearly with concentration of 2‐ME in the range of 5.0 × 10^?8‐5.0 × 10^?6 M (r = 0.9995). The detection limit (3σ) of 2‐ME was 7.5 × 10^?9 M and the relative standard deviation was 0.8% at 5.0 × 10^?7 M 2‐ME (n = 8). The proposed method was successfully applied for the flow‐injection CL determination of 2‐ME in pharmaceutical preparations and biological fluids with the recoveries from 92.4 to 106.8%. The possible CL reaction mechanism was also discussed briefly.     

Prenylated Benzene Metabolites from Melicope pteleifolia

Chemical investigation on the stem and root of Melicope pteleifolia afforded three new prenylated benzene metabolites as racemic mixtures, named pteleifolins A–C ( 1 – 3 , resp.). Their gross structures were elucidated on the basis of spectroscopic analysis, especially 2D‐NMR experiments. An enantiomer resolution of (±)‐ 1 using chiral HPLC was performed, and the absolute configuration of the enantiomers were determined to be (+)‐(S)‐ 1 and (?)‐(R)‐ 1 by means of circular‐dichroism analysis.     

A New Taraxastane‐Type Triterpene from Vitex trifolia var. simplicifolia

3‐Oxotaraxer‐14‐en‐30‐al ( 1 ), a new taraxastane‐type triterpene, together with 14 known compounds, taraxerone ( 2 ), 3‐epiursolic acid ( 3 ), 2α,3β‐dihydroxyurs‐12‐en‐28‐oic acid ( 4 ), lupeol ( 5 ), betulinic acid ( 6 ), casticin ( 7 ), artemetin ( 8 ), luteolin ( 9 ), 4‐hydroxybenzoic acid ( 10 ), docosanoic acid ( 11 ), tetracosanoic acid ( 12 ), cerotic acid ( 13 ), β‐sitosterol ( 14 ), and β‐daucosterol ( 15 ), was isolated from the leaves and twigs of Vitex trifolia var. simplicifolia . Compounds 2 – 6 were found for the first time in this plant. Their structures were established by spectroscopic analysis, including 2D‐NMR techniques. Cytotoxic activities of compounds 3 , and 5 – 10 were tested on the three cancer cell lines, PANC‐1, K562, and BxPC‐3. Results revealed that 7 exhibited cytotoxicity against PANC‐1, K562, and BxPC‐3, with IC₅₀ values of 4.67, 0.72, and 4.01 μg/ml, respectively, whereas 8 was inactive against these cancer cell lines. The structure? activity relationship of compound 7 and 8 indicated that the 3′‐OH group in polymethoxyflavonoids is essential for antitumor activity.