Simulation of Dual Frequency Capacitive Sheath over a Concave Electrode in Low Pressure

A self-consistent two-dimensional （2D） collisionless fluid model is developed to simulate the characteristics of a dual frequency capacitive sheath over an electrode with a cylindrical hole. The model consists of 2D time-dependent fluid equations coupled with Poisson＇s equation, in which the low-frequency （LF） and high-frequency current sources are applied to an electrode. Thus, the so-called equivalent circuit model coupling with the fluid equations will be able to self-consistently determine the relationship between the instantaneous voltage on the powered electrode and the sheath thickness. The time-averaged potential, electric field, ion density in the sheath and ion energy distributions at the bottom of the hole are calculated and compared for different LF frequencies. The results show that the LF frequency is crucial for determining the sheath structure. The existence of the cylindrical hole on the electrode obviously affects the sheath profile in the parallel to the electrode and makes the sheath profile tend to adapt the contours of the electrode, which is the plasma molding effect.     

Result of search for low velocity exotic particles

The L3＋C experiment, taking advantage of the L3 muon magnetic spectrometer, measured the spatial tracks of charged cosmic ray particles to obtain rigidity as well as velocity. One possible low velocity exotic particle is observed. The existing uncertainties are discussed, and the flux upper limit of the low velocity exotic particles from this observation is deduced based on the assumption of a null observation. The result is 6.2×10^-10 cm^-2·s^-1·sr^-1 at 90% confidence level in the velocity range from 0.04c to 0.5c.     

人工种植黄芩根、茎、叶、花、种子中营养元素的光谱分析

使用火焰原子吸收光谱法对人工种植黄芩的根、茎、叶、花、种子5个部位中的Ca,Cu,Fe,Mn,Zn,K六种矿物元素的含量进行了测定分析。结果表明,黄芩各部位均含有丰富的矿物元素,根中营养元素由高到低的顺序是为Ca>Fe>Cu>Mn>Zn>K,茎中的为Fe>Mn>Zn=Cu>K>Ca,叶中的为Fe>Mn>Zn>Cu>K>Ca,花中的为Ca>Fe>Mn>Zn>Cu>K,种子中的为Ca>Fe>Zn>Mn>Cu>K。研究认为人工种植黄芩茎、叶、花、种子中Fe, Mn, Zn含量皆较高,花和种子中还富含Ca, 根中富含Ca和Fe元素。     

撞击流中颗粒碰撞传热理论模型研究

建立了考虑颗粒接触面导热的颗粒碰撞传热模型,相应完善了气固两相撞击流理论模型,并对不同条件的撞击流干燥过程进行了模拟。计算结果与实验结果非常吻合,从而验证了所建模型的正确性。本文还分析了颗粒碰撞传热、加料方式以及喷嘴间距对撞击流干燥性能的影响规律。结果表明:在本文所涉及的撞击流干燥过程中,颗粒碰撞传热对干燥性能的影响并不明显;单边加料时颗粒物料的降水幅度及撞击流装置的干燥强度都明显大于双边加料的工况;喷嘴间距较大时,物料的降水幅度及装置的干燥强度均较大。     

Zig-Zag板条泵浦的2.12μm激光器

 为了实现窄脉宽、高峰值功率2.12 μm激光的稳定输出,设计了基于侧面泵浦Zig-Zag 板条产生1.06 μm基频光,进而泵浦KTP晶体通过II类相位匹配产生2.12 μm激光的光参量振荡实验。对外腔及内腔进行了实验研究,分别获得了1.53%和2.86%的电光转换效率。在20 Hz频率下内腔2.12 μm输出能量达到70 mJ以上,脉宽7 ns~9 ns。其中内腔实验中能量输出稳定度接近8%。     

Lagrange方法基于保正性的时间步长

对交错网格上Lagrange预估-校正显示格式的时间步长选取提出新的方法.与经典CFL稳定性理论时间步长选取方法不同,新方法考虑了原始微分方程组的非线性效应,并基于物理量保正性给出了自适应的时间步长选取方法.数值实验验证了该方法有效.     

百瓦级高亮度光纤耦合半导体激光模块的研制

用3只976 nm半导体激光短列阵作为子模块,研制出连续工作的百瓦级高亮度光纤耦合模块。首先,利用光束转换器将每个半导体激光短列阵进行光束整形;然后采用空间复用技术将3个半导体激光短列阵在光参数积小的方向上叠加,并利用倒置伽利略望远镜作为扩束器进一步压缩发散角;最后利用优化结构的透镜组将激光聚焦到芯径200 μm,数值孔径为0.22的光纤中。测量结果显示:聚焦后激光的发散角为24.8°,焦平面的光斑尺寸为175.2 μm;耦合后测量光纤出光功率可达107 W,对应亮度为2.23 MW/(cm²·sr),达到了国内利用列阵进行光纤耦合的领先水平;在工作电流为52.5 A时,电光转换效率为43.1%,远高于全固态等激光器;最后测量本模块在不同驱动电流时的光谱,并以此计算出模块的热阻为1.29 K/W,说明它的散热性能良好。结果表明,本光纤耦合模块适合应用于泵浦光纤激光器、医疗和激光加工等领域。     

XYZ particles at Belle

In this paper, I review recent progress in the study of the XYZ particles at Belle. I only focus on studies with charmonium and one or more light mesons in the final states. This covers the X（3872）, X（3915）, Y（4140）, X（4350）, and the charged Z states.     

耦合界面计算格式的一维流体力学Lagrange有限点方法

为探索高维多介质流体力学散乱点集上的Lagrange有限点方法,首先对相应一维问题进行研究,提出一种Lagrange有限点方法:在计算区域内(包括物质界面)设置任意离散点集,所有力学量都设在该点集上,在内点和界面点上分别建立离散格式.内点算法为基于Taylor展开的差分方法.界面点算法为显式追踪算法,从定解条件出发,利用Rankine-Hugoniot关系和特征差分方法,计算界面点位置及相应的状态量变化.通过追踪界面点的运动得到物质界面是方法的最大特色.典型算例计算结果与精确解符合很好,验证了算法的合理和有效性.