SiO2包覆纳米CaCO3的透射电镜表征

在透射电子显微镜（TEM）电子衍射模式下，用适当孔径的物镜光阑选择非晶态SiO2的衍射区域，拍摄以溶胶一凝胶法制备的SiO2包覆纳米CaCO3的暗场像。与未经包覆SiO2的纳米CaCO3的暗场像作对比，可以看出经过SiO2包覆的纳米CaCO3粒子周围有一白色亮环，从而得到SiO3包覆层的暗场照片。用高分辨方法观察了包覆层与CaCO3粒子间的界面情况。     

反应注射成型聚氨酯互穿聚合物网络研究——刚性网络对于体系形态及性能的影响

用微型反应注射成型机制备了以聚氨酯(PU)为弹性相的两类同步互穿聚合物网络(SIN),其刚性相分别采用保留仲羟基的乙烯基酯树脂(VERH)以及封闭仲羟基的乙烯基酯树脂(VERA)。用傅里叶变换红外光谱在线跟踪了这类互穿网络的生成过程,发现刚性网络抑制了PU网络中硬段有序结构的形成,两个网络间有一定程度的互穿,而两个网络间的化学键作用进一步削弱氢键强度。自旋—自旋弛豫时间的测定进一步表明网络间存在一定的互穿以及刚性相对于PU硬段结晶的抑制作用。材料的力学性能与其SIN的形态有关。VERA网络对PU表现出明显的增强作用,而由VERH网络形成的SIN则由于体系相分离进程受到严重阻碍而使材料性能恶化。     

Photovoltaic Characteristics of a Naphthylamine Derivative

Organic photovoltaic （OPV） cells were fabricated via vacuum vapor deposition with {4-[2-（3-di-cyanomethylidene-5,5-dimethylcyclohexenyl）vinyl]phenyl}di（1-naphthyl）amine （DNP-2CN） as the electron donor, and fullerene （C60） as the electron acceptor. A thin film （10 nm） of tris（8-quinolinolato）aluminum （Alq3） was adopted as the buffer layer. A device based on this DNP-2CN exhibited an open circuit voltage （Voc） of 370 mV, a short-circuit current density （Jsc） of 0.61 mAocm 2, and a white-light power conversion efficiency （ η） of 0.09% （AM1.5, 75 mW.cm^- 2）.     

Synthesis and Characterization of Novel Polyimides Based on Pyridine-containing Diamine

A new aromatic diamine monomer containing pyridine unit, 2,6-bis （4-aminophenoxy- 4＇-benzoyl）pyridine（BABP）, was synthesized in three steps, starting from 2,6-pyridinedicarboxyl chloride. A series of novel pyridine-containing polyimides were prepared v/a the polycondensation of BABP with various aromatic dianhydrides through poly（amic acid） precursors, and thermal or chemical imidization of the precursors. The polyimides exhibit desirable properties, e.g., good solubility in N-methyl-2-pyrrolidone and m-cresol, excellent thermal stability and film-forming capability, as well as high inherent viscosity, indicating high molecular weight.     

Synthesis and Structure of 〔Cu(μ-C_6H_5COO)_2(C_4H_8O)〕_2

1mTRODUCT1ONBinuclearcoppercomplexesareimportantnotonlyincoordinationchemistryandmagnetostructuralstudiesbutalsoinpracticalapplication.tliInanattempttoseekthedisPersionandemulationreagentsofCWM(themixtureofcoalandwater),thetitlecomP0undwassynthesizedbyanoxidativepreparationmethodt2i,whosesynthesisandstructurearedifferentfromthosedescribedbyWangetoft3i.Here,0nlythesynthesisandstructureofthetitlecomP0undarereportedandthestudiesofitsappli-cationareinprogress.2EXPERIMENTAL2.1Preparati0n…     

Preparation of Co3O4 Nanofibers via an Electrospinning Technique

Thin PVA/cobalt acetate composite fibers were prepared by using sol-gel processing and electrospinning technique.After calcination of the above precursor fibers,Co3O4 nanofibers with a diameter of 50-150 nm could be successfully obtained.The fibers were characterized by SEM,FT-IR,WAXD,respectively.     

Zr柱撑蒙脱土上负载稀土铈及铜铈催化剂的制备与表征

The Zr-pillaraed montmorillonite supported Ce and Cu-Ce catalysts were prepared by impregnation method. The performance of the catalysts was evaluated via the catalytic oxidation of volatile organic compounds (acetone, ethyl acetate, and toluene). The results showed that after supporting with Ce and Cu-Ce, the catalysts had a better reducibility. Moreover, the surface areas of the samples were increased. In addition，it was found that the Zr-pillared montmorillonite supported Cu-Ce catalysts had a higher activity and the reaction temperature decreased by 150～200 ℃ compared with the sample without Cu-Ce modification.     

对氟苯甲醛水杨酰腙镍(II)配合物的合成、表征及其晶体结构

A nickel(II) complex Ni(C₁₄H₁₀N₂O₂F)₂ was synthesized from p-fluorobenzaldehyde salicylhydrazone and Ni(CH₃COO)₂·4H₂O and crystallized by diffusion, the structure of which was characterized by IR spectrum, ¹H NMR, and X-ray single-crystal diffraction. The complex crystallizes in monoclinic space group C2/c with a=2.460 6(2) nm, b=0.774 1(1) nm, c=1.534 9(1) nm, β=122.300(1)°, and V=2.471 1(4), Z=8, D_c=1.541 g·cm^-3. We reported the IR, ¹H NMR, crystal structure. CCDC: 638652.     

MoO3—SiO2表面复合物金属催化剂载体的制备与表征

采用ＭｏＯＣｌ４的盐酸溶液负载于ＳｉＯ２的表面反应法，制备了负载型和键联型两种ＭｏＯ３－ＳｉＯ２（ＭｏＳＯ）表面复合物载体。利用红外光谱法研究了ＭｏＳＯ的表面构造及其化学吸附性能；并利用ＴＰＲ技术考察了该表面复合物载体对负载金属Ｐｄ，Ｃｕ氧化物还原过程的影响。     

离子液体相转移催化环己醇氧化制备环己酮

以不同种类的离子液体作为相转移催化剂,用双氧水作为氧化剂,Na2WO4·2H2O为催化剂,在适当的反应条件下,能有效进行相转移催化环己醇氧化制备环己酮.实验结果表明,采用酸性离子液体[C16mim]HSO4和[C14mim]HSO4相转移催化合成环己酮,可提高环己酮的产率,具有反应条件温和、操作简便、需用时间短、相转移催化剂可以循环使用等优点.在反应温度为90℃,反应时间为50min条件下,环己醇的转化率高达100%,选择性99%以上.