可调移动重叠分离图法用于高效液相色谱多台阶梯度分离条件优化的研究

计算机辅助高效液相色谱（HPLC）分离条件优化可以低成本、快速地得到优化的分离条,因而已较为广泛地用于复杂样品的分离分析。基于移动重叠分离图方法,又发展了一种新型的多台阶梯度分离条件的优化方法可调移动重叠分离图法。该方法通过预测不同流动相条件下各组分的保留时间、峰宽和分离度,绘制出对于样品中各组分的重叠分离区域图。在对当前台阶流动相组成进行优化的同时,考虑其对后面一到两个台阶上流出组分保留的影响,实时地重新绘制对于后面台阶上流出组分的重叠分离区域图。通过观察当前台阶流动相条件对当前台阶和后面台阶上流出组分分离的影响,综合考虑样品中所有组分的分离情况,找到更接近全局最优的分离条件。通过扫描的方法对优化得到的分离条件进行微调,能够进一步提高分离效果。采用文献数据对可调移动重叠分离图法的应用加以说明,在二元流动相体系下,证明了该方法在HPLC方法建立方面的优越性。     

Lewis碱性混合萃取剂碱度的测定

提出一种利用萃取法间接测定Lewis碱性萃取剂碱度的简便方法, 选择常用的Lewis碱性萃取剂TOA/正辛醇和TRPO/煤油, 测定了其碱度, 为今后络合萃取剂的选择及其机理的研究提供理论指导.     

New observation on a class of old reactions:Chemoselectivity for the solvent-free reaction of aromatic aldehydes with alkylketones catalyzed by a double-component inorganic base system

Solvent-free reactions of aromatic aldehydes with three representative ketones,including acetophenone,acetone and cyclohexanone,have been examined under the catalysis of a low-cost inorganic base system consisting of NaOH and K2CO3.It was found that the chemoselectivity of the reactions is in close relationship with the composition of the reactants and the doublecomponent catalyst.Under the optimized experimental conditions,1,2,3,4,5-pentasubstituted cyclohexanols,α,β-unsaturated ketones and Claisen-Schmidt...     

Electrochemical performance of a nano SnO2-modified LiNi1/3Co1/3Mn1/3O2 cathode material

The nano SnO₂-modified LiNi_1/3Co_1/3Mn_1/3O₂ was successfully prepared by a carrier transfer method. The pristine and modified samples were characterized with various techniques such as XRD, SEM, XPS and EDS. The results showed that the SnO₂ particles did not enter the crystal structure of LiNi1/3Co1/ 3Mn1/3O₂, many nano SnO₂ particles were uniformly covered on the surface of LiNi_1/3Co_1/3Mn_1/3O₂ and the modified thin layer could inhibit the dissolution of transition metal oxides. The electrochemical tests indicated that the existence of nano SnO₂ could improve the discharge capacity and rate capability owing to the decreased interfacial polarization. The cycling stability was remarkably improved at room temperature and 55 ℃. The XRD patterns of the fresh NCM electrode and after 50 cycles proved that the structural change of NCM was not so effective on the capacity fade.     

锌硅钼钨多元取代多金属含氧簇合物的合成、表征及其催化异丙醇气相反应的活性

利用pH值的调变, 以H₄SiMo_12－nW_nO₄₀•(20～25)H₂O (n＝2, 4, 6, 8, 10)和Zn(NO₃)₂饱和溶液为原料制得一系列锌硅钼钨多元取代多金属含氧簇合物, 通过IR, XRD, XPS等方法对合成的催化剂的结构和性质进行了表征, 并利用吡啶吸附红外及氨程序升温脱附分别测定样品表面的酸种类和酸强度. 考察了催化剂对异丙醇气相反应的活性, 同时详细研究了异丙醇气相反应产物分布与催化剂组成之间的关系.     

小分子液滴为模板制备有机-无机杂化纳米微胶囊

通过细乳液聚合,在正辛烷液滴外包覆一层苯乙烯与甲基丙烯酸-3-三甲氧基硅丙酯(MPS)的共聚物,制备了有机-无机杂化纳米微胶囊.通过透射电镜和动态光散射粒径仪观测其形态,用红外光谱表征了其分子结构.讨论了聚合方法对微胶囊制备的影响;通过溶度参数的计算和实验验证,发现配方中单体体积分数需小于36%才能得到微胶囊;通过界面自由能模型的计算和动力学分析,说明了微胶囊形成的热力学原因;发现共聚物中MPS的加入有利于微胶囊的形成,但若MPS的含量过大将会导致胶囊塌陷;最后阐明了这种微胶囊制备过程的机理.     

聚丙烯酰胺-聚乙二醇-水体系相图及丙烯酰胺单体在两相中的分配

聚丙烯酰胺(PAAm)和聚乙二醇(PEG)两种水溶液混合时能形成双水相体系,其中上层为PEG富集相,下层为PAAm和PEG的混合相.用凝胶渗透色谱(GPC)法和浊度滴定法研究了PAAm-PEG-H₂O双水相体系的相图,结果表明,随着PEG分子量的升高,体系的分相浓度下降.在PAAm-PEG20000-H₂O体系中,随着体系温度升高,分相浓度先下降后升高,55℃时分相浓度最低.丙烯酰胺(AAm)单体能在两相中发生相分配,分配系数随着PAAm浓度和平衡温度的增加而增大,随着PEG浓度的增加而下降.     

液液微萃取-甲基衍生化/气相色谱法对水中氯代酸除草剂的测定

在pH大于12的条件下使水样中的氯代除草剂全部水解为盐,用正己烷和甲基叔丁基醚混合溶剂提取有机杂质,再在酸性条件下经5 mL甲基叔丁基醚提取,重氮甲烷甲基衍生化30 min后用带微电子捕获检测器的毛细管气相色谱分析,以4,4-二溴八氟联苯为内标物进行定量.茅草枯、麦草威、2,4-D、五氯苯酚的质量浓度分别在5.0 ～500、1.0 ～200、5.0 ～500、0.5 ～100 μg/L范围内与色谱峰面积呈良好的线性关系(r= 0.994 5 ～0.998 0),检出限分别为1.0、0.5、1.0、0.1 μg/L.用该法测定南京玄武湖水样中的茅草枯,其质量浓度为7.1 μg/L,4种被测组分在高、中和低添加水平下的回收率分别为102% ～105%、96% ～110%、87% ～109%.同时建立了一种生产重氮甲烷的新原料--N-亚硝基-N-甲基脲的简易方法.     

预裂化理论研究:基质表面酸性位类型及不同类型酸性位接触顺序对裂化过程小分子烯烃收率的影响

在区分氢负离子转移反应与氢转移反应、非选择性氢转移反应与总的氢转移反应的情况下,通过合成物性相近但酸性不同的氧化铝,用以作为裂化催化剂基质材料,在固定床反应器上考察了催化裂化过程,基质酸性位类型及基质表面Lewis及Brönsted酸性位接触顺序对小分子烯烃(丙烯、丁烯)收率的影响。结果表明,催化裂化生成小分子烯烃过程中,分子筛与基质所呈现出的反应特点存在较大的区别,前者活性虽高,但总的氢转移反应活性过强。基质材料裂化活性虽低但其表面以氢负离子转移反应为主,反应路径角度更有利于小分子烯烃收率的提高。另外,基质表面存在Brönsted酸性位,或原料油首先与基质表面Lewis酸性位相接触再与Brönsted酸性位反应的预裂化过程,会在促进裂化反应发生的同时抑制总的氢转移反应,更有利于小分子烯烃收率的提高。     

Al2O3/SnO2 Co-Nanoparticle Modified Grafted Collagen for Improving Thermal Stability and Infrared Emissivity

Al2O3/SnO2 co-nanoparticles were prepared with a modified sol-gel technique followed by a thermal treatment process. With these co-nanoparticles the grafted collagen-Al2O3/SnO2 nanocomposites were obtained using a supersonic dispersion method. X-ray diffraction, FT-IR analysis, transmission electron microscopy, TGA/DTA and infrared emissivity test were performed to characterize the resulting nanoparticles and nanocomposites, respectively. The Al2O3/SnO2 co-nanoparticles showed a narrow distribution of size between 20-40 nm and could be uniformly absorbed on the tri-helix scaffolds of the grafted collagen without any aggregation. The nanocomposites possessed better thermal stability and substantially lower infrared emissivity than the grafted collagen and Al2O3/SnO2 co-nanoparticles with an increase of degradation temperature from 39 to 210 ℃ and a decrease of infrared emissivity from 0.850 of the grafted collagen and 0.708 of the Al2O3/SnO2 co-nanoparticles to 0.424, which provided a potential application of the nanocomposites to areas such as photoelectronics.