Synthesis of Higher Alcohols via Syngas on Cu/Zn/Si Catalysts. Effect of Polyethylene Glycol Content

Cu/Zn/Si catalysts with different polyethylene glycol (PEG) content were prepared by a complete liquid-phase method, and characterized by XRD, H₂-TPR, N₂-adsorption, and XPS. The influence of PEG content on the higher alcohols synthesis from syngas was investigated. The results showed that addition of PEG can influence the texture and surface properties of the catalysts, and therefore affect their activity and product distribution. With an increase in PEG content, BET surface area, Cu crystallite size and surface active ingredient content of the catalysts first increased and then decreased, the CO conversion had similar variation tendency. However, the pore volume and pore diameter of the catalyst increased, and the binding energy of the active component and the content of Cu₂O decreased, which resulted in higher catalyst selectivity towards higher alcohols. The highest C²⁺OH selectivity in total alcohols was 60.6 wt %.     

Bismuth Tellurate Nanospheres and Electrochemical Behaviors of L-Cysteine at the Nanospheres Modified Electrode

Bismuth tellurate nanospheres have been successfully synthesized by a facile hydrothermal route. X-ray diffraction (XRD) shows that the nanospheres are composed of orthorhombic Bi₂Te₂O₇ phase. Scanning electron microscopy (SEM) displays that the diameter of the nanospheres is 100–500 nm. The bismuth tellurate nanospheres (BTS) modified glassy carbon electrode (GCE) has been prepared for the electrochemical detection of L-cysteine (L-CySH). A pair of semi-reversible CV peaks at +0.14 V and–0.84 V, respectively are observed. The BTS modified GCE displays high electrocatalytic activity toward L-CySH and exhibits a linear relationship in the range of 0.0001–2 mM with a detection limit of 0.046 μM in KCl solution. The broad linear range, low detection limit, good reproducibility and stability make the BTS modified GCE valuable for the practical application.     

Impact of North Korean nuclear weapons test on 3 September, 2017 on inland China traced by 14C and 129I

Journal of Radioanalytical and Nuclear Chemistry - Environmental impact of North Korea nuclear weapons testing on 3 Sept, 2017, is of key concern. In order to investigate whether there is...     

Non-isothermal crystallization kinetics of Ti<Subscript>20</Subscript>Zr<Subscript>20</Subscript>Hf<Subscript>20</Subscript>Be<Subscript>20</Subscript>(Cu<Subscript>50</Subscript>Ni<Subscript>50</Subscript>)<Subscript>20</Subscript> high-entropy bulk metallic glass

The crystallization transformation kinetics of Ti₂₀Zr₂₀Hf₂₀Be₂₀(Cu₅₀Ni₅₀)₂₀ high-entropy bulk metallic glass under non-isothermal conditions are investigated using differential scanning calorimetry. The alloy shows two distinct crystallization events. The activation energies of the crystallization events are determined using Kissinger, Ozawa and Augis–Bennett methodologies. Further, we observe that similar values are obtained using the three equations. The activation energy of the initial crystallization event is observed to be slightly small as compared to that of the second event. This implies that the initial crystallization event may have been easier to be occurred. The local activation energy (E(x)) maximizes in the initial stage of crystallization and keeps dropping in subsequent crystallization process. The non-isothermal crystallization kinetics are further analyzed using the modified Johnson–Mehl–Avrami (JMA) equation. Further, the Avrami exponent values are observed to be 1.5 < n(x) < 2.5 for approximately the entire period of the initial crystallization event and for most instances (0.1 < x < 0.6) of the second crystallization event, which implies that the mechanism of crystallization is significantly controlled by diffusion-controlled two- and three-dimensional growth along with a decreasing nucleation rate.     

Synergistic effect of fluorination on both donor and acceptor materials for high performance non-fullerene polymer solar cells with 13.5% efficiency

A high performance polymer solar cells(PSCs) based on polymer donor PM6 containing fluorinated thienyl benzodithiophene unit and n-type organic semiconductor acceptor IT-4 F containing fluorinated end-groups were developed. In addition to complementary absorption spectra(300–830 nm) with IT-4 F, the PM6 also has a deep HOMO(the highest occupied molecular) level(-5.50 e V), which will lower the open-circuit voltage(V_(oc)) sacrifice and reduce the E_(loss) of the IT-4 F-based PSCs. Moreover, the strong crystallinity of PM6 is beneficial to form favorable blend morphology and hence to suppress recombination. As a result, in comparison with the PSCs based on a non-fluorinated D/A pair of PBDB-T:ITIC with a medium PCE of 11.2%, the PM6:IT-4 Fbased PSCs yielded an impressive PCE of 13.5% due to the synergistic effect of fluorination on both donor and acceptor, which is among the highest values recorded in the literatures for PSCs to date. Furthermore, a PCE of 12.2% was remained with the active layer thickness of up to 285 nm and a high PCE of 11.4% was also obtained with a large device area of 1 cm~2. In addition, the devices also showed good storage, thermal and illumination stabilities with respect to the efficiency. These results indicate that fluorination is an effective strategy to improve the photovoltaic performance of materials, as well as the both fluorinated donor and acceptor pair-PM6:IT-4 F is an ideal candidate for the large scale roll-to-roll production of efficient PSCs in the future.     

Pt/ZnO 在室温水相无碱条件下绿色催化苯甲醇选择性氧化

醇类化合物选择性氧化是有机合成中一个非常重要的反应, 在精细化工领域具有重要应用. 而以水为绿色溶剂, 分子氧为绿色氧化剂实现醇类化合物选择性氧化是绿色化学领域的一大挑战. Pt 催化剂由于其优异的活化氧气和 C-H 键的能力在该反应中得到了广泛应用. 但是, 常规的 Pt 催化剂通常需要在较高温度和较高氧气压力以及加碱的条件下才能发挥作用, 从而引起了催化剂腐蚀等一系列问题. 从绿色化学角度出发, 进一步优化 Pt 催化剂, 让其能够在室温无碱条件下以空气为氧化剂选择性氧化醇类合成羰基化合物具有重要的研究价值和应用前景.本文通过化学还原法制备了 Pt/ZnO 催化剂, 系统研究了该催化剂在水相无碱条件下选择性氧化苯甲醇生成苯甲醛反应中的催化性能. X 射线电子衍射和透射电镜等结果表明, Pt 颗粒较小(3.2 ± 0.3 nm), 均匀分散在 ZnO 载体上; X 射线光电子能谱表明 ZnO 载体能够稳定 Pt 纳米颗粒表面的 Pt0物种. 上述催化剂在水相苯甲醇选择性氧化反应中, 在室温下即可催化空气高选择性氧化苯甲醇到苯甲醛 (选择性>99%), 并表现出比 Pt/SiO2, Pt/Al2O3, Pt/TiO2, Pt/Ca(Mg)-ZSM-5 等催化剂更为优异的催化活性. 这可归结于 Pt 和 ZnO 之间的协同作用. 该协同作用通过动力学实验和密度泛函理论计算 (DFT)得到了证实. 氧分压实验表明, 在以空气为氧化剂时, O2的活化并不是限制 Pt/ZnO 催化活性的关键因素, 而动力学同位素效应实验则证实了苯甲醇的 C-H 键活化是整个反应的决速步骤. 通过构建不同的理论模型, 分别计算了 Pt/ZnO 界面处以及纯 Pt 位点上苯甲醇选择性氧化的反应过程. 结果表明, 苯甲醇和氧气分子倾向于分别在 ZnO 和 Pt 上进行吸附, 随后由吸附的氧气分子来活化苯甲醇中的 C-H 键, 进而生成苯甲醛和水. 而当 ZnO 不参与苯甲醇的吸附活化时, 整个反应的活化能会大大提高, 表明 ZnO 和 Pt 之间的协同作用对于整个反应至关重要. 此外, Pt/ZnO 表现出非常优异的稳定性, 循环使用 4 次后, 催化剂结构以及催化活性没有显著变化.进一步向 Pt/ZnO 催化剂中引入少量 Bi 元素对 Pt 的电子结构进行修饰, 可以将 Pt/ZnO 的催化活性提高 3 倍. 所制备的 Pt/Bi-ZnO 复合物是目前报道的相同条件下催化苯甲醇选择性氧化反应转化频率 (45.1 h-1)最高的催化剂.     

简便方法制备氮掺杂的碳球用作高效非金属氧还原催化剂（英文）

随着人们环保意识的不断增强,社会对清洁能源的需求也日益增加.燃料电池具有效率高,燃料来源丰富,可直接将化学能转化成电能且污染小等优点,因而受到了广泛关注.然而,燃料电池的阴极氧还原反应(ORR)速率较慢,成为提高燃料电池整体效率的制约因素.因此,开发高性能的ORR催化剂,加快ORR反应速率具有非常重要的意义.目前,Pt基催化剂被认为是活性最好的商用ORR电催化剂.尽管此类催化剂具有较高的催化活性和良好的稳定性,但Pt的储量有限,价格高昂,抗燃料毒化性能差,限制了其大规模应用.近年来,为了减小Pt的用量,降低催化剂成本,人们除了致力于研究贵金属合金催化剂及非贵金属催化剂外,还把目光聚焦在了非金属催化剂,特别是碳及其复合材料的研究上.在众多碳材料中,碳球因具有良好的表面渗透性和较高的机械稳定性而被广泛应用于催化、吸附、药物输送和能量存储及转化等领域中.然而,碳球的表面化学惰性较强,比表面积较低,使其部分应用受到了限制.因此,人们采用了多种方法来调控碳球的物理化学性质.其中,向碳材料中掺入杂原子,尤其是氮原子的方法广受青睐.因为杂原子的掺入会显著增强作为主体的碳原子给电子的能力和表面吸附性质,从而对ORR表现出优异的催化活性和稳定性.本文以蔗糖作为碳源,三聚氰胺作为氮源,采用水热法及高温热解法制备了一系列氮掺杂的生物质碳球.并对氮掺杂量及热解温度进行了优化.结果表明,石墨化程度及石墨氮含量的提高,能有效地提高催化剂的活性.在优化了的条件下得到的催化剂N0.1C1.9S-900,表现出了比商业Pt/C催化剂更好的ORR催化性能.在0.1 mol/L KOH中,该催化剂催化ORR的起始电位和半波电位分别为–22.6和–133.6 mV(vs.Ag/AgCl),极限电流密度为4.6 mA/cm~2,分别比商业Pt/C高出7.2 mV,5.9 mV和0.2 mA/cm~2.同时,在经过30000 s的稳定性测试中,N0.1C1.9S-900催化剂的电流损失也远低于Pt/C,表明该催化剂具有良好的稳定性.此外,在抗甲醇毒化实验中,相比于商业Pt/C,N0.1C1.9S-900催化剂对甲醇有更好的耐受性.另外,该催化剂催化的ORR属于高效的4e~–途径.可见,该催化剂作为燃料电池的阴极氧还原反应催化剂具有广阔的前景.     

Au促进Pt/WO3催化甘油氢解制1,3-丙二醇

近年来, 以生物质为基础的生物柴油得到了迅速发展, 导致了粗甘油过剩. 通过甘油选择性氢解制1,3-丙二醇, 进而被用于合成高价值的聚对苯二甲酸丙二醇酯被认为是最具工业应用潜力的反应之一, 对于提高生物柴油的利用效率有着极其重要的意义. 但由于反应空间位阻和热力学上的限制给甘油氢解制1,3-丙二醇带来了很大的挑战, 因此需要设计高活性的金属-酸双功能催化剂以降低甘油第二个C-O键断裂的活化能和减少其他副反应的发生. 目前Pt-W和Ir-Re双功能催化剂可高选择性制得1,3-丙二醇, 但仍需较严苛的反应条件实现对氢气的活化和解离. 本课题组曾将准单原子/单原子Pt高度分散于具有大量氧空位和酸位点的WOx载体上, 十分有利于甘油选择性氢解制1,3-丙二醇反应; 在Au-Pt/WOx催化剂中添加Au可促进B酸产生, 进而提高了甘油转化率和1,3-丙二醇的选择性.为了进一步研究Au对Pt/WOx催化剂结构和催化性能的影响, 本文利用CTAB辅助吸附法制备了Au/WO3, 再浸渍Pt制得Pt/Au/WO3双金属催化剂. 在甘油选择性氢解制1,3-丙二醇反应中, 所制催化剂表现出比Au-Pt/WOx更好的催化活性, 1,3-丙二醇时空收率为0.078 g1,3-PDO/(gcat·h), 是后者的1.95倍. 值得一提的是, Au-Pt/WOx催化剂在低压时活性较高, 而Pt/Au/WO3催化剂活性则在压力的升高而提高; 另外反应温度的升高导致副产物正丙醇的选择性上升, 1,3-丙二醇的选择性降低. 因此, 适宜的反应条件为155℃和5 MPa. 与Pt/WO3和Pt/WOx相比, Pt/Au/WO3表现出了更优异的催化性能, 其1,3-丙二醇的时空收率是Pt/WO3的2.36倍和Pt/WOx的4倍.为了探究Au的掺入对Pt/WOx催化剂性能的影响, 通过XRD, TEM, H2-TPR和XPS等技术对催化剂进行了深入表征. 结果表明, 与Pt/WO3相比, Pt/Au/WO3-600催化剂的XRD衍射峰向小角度偏移, 其原因是Au3+离子半径(0.85 ?)比W6+的(0.60 ?)大, Au3+以取代晶格W6+形式进入WO3晶格中; 对H2-TPR前300 ℃耗氢量的计算可知:Pt/WO3可被还原至Pt/WO2.96, 而Pt/Au/WO3可被还原至Pt/Au/WO2.91. 因此与Pt/WO3相比, Pt/Au/WO3表面氧空位更加丰富. TEM和XPS表征可知, 添加0.1 wt%Au后, 促进了更低价态的Pt均匀分散在WO3载体上, 其平均粒径为2.36 nm.综上所述, Au的掺杂改变了Pt/Au/WO3双金属催化剂的结构, 不仅降低了Pt和W的还原温度, 削弱了Pt和W之间的相互作用, 也促进了更低价态的Pt均匀分散于WO3载体上, 使得Pt/Au/WO3双金属催化剂在甘油氢解制1,3-丙二醇反应中具有更为优异的活性和产物选择性. 该催化剂有望被广泛运用于其他生物质平台化合物加氢脱氧的反应中.     

Catalytic dehydrogenation of propane to propylene over highly active PtSnNa/γ-Al_2O_3 catalyst

This paper reports a new fabrication method of the PtSnNa/γ-Al₂O₃ catalyst through ball milling, which is more stable and active than the commercial catalyst.