Liquid crystal polymers. IX. Copolyesters of trans-4,4′-stilbenedicarboxylic acid, 1,4-butanediol,and aromatic dicarboxylic acids

Copolyesters of trans-4,4-stilbenedicarboxylic acid (SDA), terephthalic acid, and 1,4-butanediol exhibit thermotropic liquid crystallinity if at least 40 mol % SDA is present (acids total 100 mol %); SDA/2,6-naphthalenedicarboxylic acid/1,4-butanediol copolyesters are liquid crystalline if at least 30 mol % SDA is present. The effects of SDA content on the thermal, rheological, plastic, and fiber properties of the copolyesters were determined. The SDA component increases the relaxation times of the polymers and enables injection-molded plastics and melt-spun fibers to have significantly increased tensile strength and stiffness.     

Einige bestrahlungsexperimente mit 2, 1-Benzisothiazolen

Some Irradiation Experiments with 2, 1-Benzisothiazoles 2, 1-Benzisothiazole ( 1 ) on irradiation with a mercury high-pressure lamp in benzene/diethylamine yields, after acetylation, 2-acetylamino-benzaldehyde ( 3 ; Scheme 1). Similarly, irradiation of 3-chloro-2, 1-benzisothiazole ( 2 ) in benzene/diethylamine leads to a mixture of 3-dimethylamino-2, 1-benzisothiazole ( 6a ) and N, N-diethyl-thioanthranilamide ( 7a ; Scheme 2). Benzisothiazole 6a , on irradiation, is not transformed into 7a . On the other hand, when 2 is irradiated in methanol a mixture of 3-methoxy-2, 1-benzisothiazole ( 4a ) and methyl anthranilate ( 5a ; Scheme 2) is obtained. In this case, 4a on irradiation in methanol or ethanol also yields 5a . No exchange of the methoxy group in 4a is observed when the irradiation is performed in ethanolic solution. Thus, 2, 1-benzisothiazoles 1 , 2 and 4a react photochemically by N,S-bond cleavage and hydrogen-atom abstraction from the solvent (Scheme 3). 3-Chloro-2, 1-benzisothiazole ( 2 ) shows a second photoreaction, i.e. nucleophilic exchange of the chloro substituent by methanol or diethyl amine. The latter reaction can also be observed thermally, e.g. in boiling methanol in the presence of methoxide ions.     

Determination by X-ray absorption spectroscopy of the Fe-Fe separation in the oxidized form of the hydroxylase of methane monooxygenase alone and in the presence of MMOD

The diiron active site in the hydroxylase of Methylococcus capsulatus (Bath) methane monooxygenase (MMOH) has been studied in the oxidized form by X-ray absorption spectroscopy (XAS). Previous investigations by XAS and X-ray crystallography have identified two different distances (3.0 and 3.4 angstroms) between the two Fe atoms in the dinuclear site. The present study has employed a systematic extended X-ray absorption fine structure (EXAFS) fitting methodology, utilizing known and simulated active site and relevant model structures, to determine unambiguously the Fe-Fe separation in the oxidized form of MMOH. Consistent and unique fits were only possible for an Fe-Fe distance of 3.0 angstroms. This methodology was then applied to study potential changes in the active site local structure in the presence of MMOD, a protein of unknown function in multicomponent MMO. Fe K-edge and EXAFS analyses revealed negligible changes in the diiron site electronic and geometric structure upon addition of MMOD to oxidized MMOH.     

Cinnamolid‐3β‐ol hemihydrate and 3β‐hydroxycinnamolide acetate,two drimanolide‐class sesquiterpene lactones from Warburgia ugandensis

3β‐Hydr­oxy‐7‐drimen‐12,11‐olide hemihydrate, C₁₅H₂₂O₃·0.5H₂O, (I), has two sesquiterpene mol­ecules and one water mol­ecule in the asymmetric unit. The OH groups of both mol­ecules and both H atoms of the water mol­ecule are involved in near‐linear inter­molecular hydrogen bonds, having O⋯O distances in the range 2.632 (3)–2.791 (2) Å. 3β‐Acet­oxy‐7‐drimen‐12,11‐olide, C₁₇H₂₄O₄, (II), has its ring system in very nearly the same conformation as the two mol­ecules of (I).     

On-line laser desorption/ionization mass spectrometry of matrix-coated aerosols

Matrix-assisted laser desorption/ionization (MALDI) was used for the on-line analysis of single particles. An aerosol was generated at atmospheric pressure and particles were introduced into a time-of-flight (TOF) mass spectrometer through a single-stage differentially pumped capillary inlet. Prior to entering the mass spectrometer, a matrix was added to the particles using a heated saturator and condenser. A liquid matrix, 3-nitrobenzyl alcohol (NBA), and a solid matrix, picolinic acid (PA), were used. Particles were ablated with a 351 nm excimer laser and the resulting ions were mass-separated in a two-stage reflectron TOF mass spectrometer. Aerosol particles containing the biomolecules erythromycin and gramicidin S were analyzed with and without the matrix addition step. The addition of NBA to the particles resulted in mass spectra that contained an intact molecular ion mass peak. In contrast, PA-coated particles did not yield molecular ion peaks from matrix-coated particles.     

Determination of inorganic anions in environmental waters with a hydroxide-selective column

US Environmental Protection Agency Method 300.0 specifies the use of an IonPac AS4A anion-exchange column with a carbonate-hydrogencarbonate eluent and suppressed conductivity detection for the determination of inorganic anions in environmental waters by ion chromatography. Hydroxide eluents have not typically been used for the routine analysis of common inorganic anions due to the lack of an appropriate hydroxide selective column and the difficulty in preparing contaminant free hydroxide eluents. The use of ion chromatography with a hydroxide-selective IonPac AS17 column, automated eluent generation and potassium hydroxide gradient represents a new approach to the routine determination of inorganic anions in environmental waters. This new approach, which is a modification of Method 300.0, allows equivalent method performance with improved linearity, precision, and method detection limits. The AS17 column provides superior retention of fluoride from the column void volume and improved resolution from small organic acids, such as formate and acetate, compared to the AS4A column. Quantitative recoveries were obtained for all the common inorganic anions spiked into typical environmental waters using this new approach, and the Performance Based Measurement System Tier 1 method validation quality control acceptance criteria are well within the acceptable ranges defined by Method 300.0. In addition, the EG40 eluent generator eliminates the need to manually prepare eluents, increasing the level of automation and ease-of-use of the ion chromatography system.     

The MPE/UCB far-infrared imaging Fabry-Perot interferometer (FIFI)

FIFI is an imaging spectrometer with two or three Fabry-Perot interferometers (FPI) in series for airborne astronomical observations in the far-infrared range (=40...200m). It employs 5×5 arrays of photoconducting detectors and offers spectral resolutions as small as 2km/s. Resolution and bandwidth can be set over a wide range to match a variety of astronomical sources. Cryogenic optics minimizes thermal background radiation and provides for in-flight step tunable spatial resolution. At 158 m wavelength the background-limited NEP is 3 × 10^-15W/Hz at 40 km/s resolution and with two FPI's; with three FPI's the expected NEP is 10^-15WHz at 5 km/s resolution.The frequency-chopping mode of the high-resolution Fabry-Perot allows for line detection in extended objects. Absolute internal flux calibration ensures adequate flat fielding of the array elements.