Relaxor type perovskites: Primary candidates of nano-polar regions

Relaxor properties of 0.7Pb(Mg_1/3Nb_2/3)O₃-0.3PbTiO₃ (PMN-PT) and non-lead perovskite thin films have been analysed in terms of large frequency dispersion of dielectric response at low temperatures. A wide spectrum of dielectric relaxation was observed in the frequency-dependent response of the imaginary part of the dielectric permittivity. Transformation from normal ferroelectric to relaxor behaviour has been observed in the case of the Ca substituting the BaTiO₃ thin films. A number of techniques were exploited to investigate the wide spectrum of relaxation times in pulsed laser ablated thin films.ac anddc electric field induced complex dielectric properties of 0.7Pb(Mg_1/3Nb_2/3)O₃-0.3PbTiO₃ (PMN-PT) thin films were studied as function of frequencies at different temperatures. Nonlinear behaviour of dielectric susceptibility with respect to the amplitude of theac drive was observed at lower temperatures. The frequency dependence of transition temperatureT _m (temperature of the maximum of dielectric constant) was studied using the Vogel-Fulcher relation. Dedicated to Professor C N R Rao on his 70th birthday     

A microspectroscopic study of the electronic homogeneity of ordered and disordered Sr2FeMoO6

Disordered Sr₂FeMoO₆ shows a drastic reduction in saturation magnetization compared to highly ordered samples, moreover magnetization as a function of the temperature for different disordered samples shows qualitatively different behaviours. We investigate the origin of such diversity by performing spatially resolved photoemission spectroscopy on various disordered samples. Our results establish that e_xtensive electronic inhomogeneity, arising most probably from an underlying chemical inhomogeneity in disordered samples, is responsible for the observed magnetic inhomogeneity. It is further pointed out that these inhomogeneities are connected with composition fluctuations of the type Sr₂Fe_1+x Mo_1-x O₆ with Fe-rich (x > 0) and Mo-rich (x < 0) regions. Dedicated to Prof J Gopalakrishnan on his 62nd birthday.     

Recyclization of Products Formed by Addition of 5-Hydrazino-2-phenyl-1,3-oxazoles Functionally Substituted in 4-Position to Aryl Isothiocyanates

Russian Journal of General Chemistry -     

Synchronization through system interconnections

An interconnection strategy with built-in adaptive controllersis presented which achieves synchronization of scalar linearsystems: the closed-loop network forces all outputs to followthe same signal asymptotically while maintaining the open-loopcharacteristics. In the design of the output feedback controllers,no knowledge of system parameters is assumed, but each systemmust have the same poles and be high-gain-stable. The proofof the main theorem relies critically on derived systems-theoreticresults and the special system topology as a network of interconnectedsystems. The topology is explained by first solving the simplerproblem of signal synchronization.     

20-relative neighborhood graphs are hamiltonian

For any two points p and q in the Euclidean plane, define LUN_pq = { v | v ∈ R², d_pv < d_pq and d_qv < d_pq}, where d_uv is the Euclidean distance between two points u and v . Given a set of points V in the plane, let LUN_pq(V) = V ∩ LUN_pq. Toussaint defined the relative neighborhood graph of V, denoted by RNG(V) or simply RNG, to be the undirected graph with vertices V such that for each pair p,q ∈ V, (p,q) is an edge of RNG(V) if and only if LUN_pq (V) = ?. The relative neighborhood graph has several applications in pattern recognition that have been studied by Toussaint. We shall generalize the idea of RNG to define the k-relative neighborhood graph of V, denoted by kRNG(V) or simply kRNG, to be the undirected graph with vertices V such that for each pair p,q ∈ V, (p,q) is an edge of kRNG(V) if and only if | LUN_pq(V) | < k, for some fixed positive number k. It can be shown that the number of edges of a kRNG is less than O(kn). Also, a kRNG can be constructed in O(kn₂) time. Let E_c = {e_pq| p ∈ V and q ∈ V}. Then G_c = (V,E_c) is a complete graph. For any subset F of E_c, define the maximum distance of F as max_epq∈Fd_pq. A Euclidean bottleneck Hamiltonian cycle is a Hamiltonian cycle in graph G_c whose maximum distance is the minimum among all Hamiltonian cycles in graph G_c. We shall prove that there exists a Euclidean bottleneck Hamiltonian cycle which is a subgraph of 20RNG(V). Hence, 20RNGs are Hamiltonian.     

Recovery of Butadiene-Styrene Rubber from Latex at Low Temperature with Various Coagulants

The influence of the charge of a metal cation and the nature of a coagulant on the recovery of butadiene-styrene rubber and properties of rubber stocks and vulcanizates was examined.     

An implicit characteristic-flux-averaging method for the euler equations for real gases

A formulation of an implicit characteristic-flux-averaging method for the unsteady Euler equations with real gas effects is presented. Incorporation of a real gas into a general equation of state is achieved by considering the pressure as a function of density and specific internal energy. The Ricmann solver as well as the flux-split algorithm are modified by introducing the pressure derivatives with respect to density and internal energy. Expressions for calculating the values of the flow variables for a real gas at the cell faces are derived. The Jacobian matrices and the eigenvectors are defined for a general equation of state. The solution of the system of equations is obtained by using a mesh-sequencing method for acceleration of the convergence. Finally, a test case for a simple form of equation of state displays the differences from the corresponding solution for an ideal gas.     

Calculation of the Radiating Characteristics of a Thermodynamically Nonuniform Gas Medium

Passive methods of remote analysis of waste gases of industrial enterprises and aircrafts engines and gases ejected in eruptions of volcanos, in fires, and in other processes disturbing the atmosphere are now of limited utility because of the lack of well-developed mathematical techniques for solving the inverse problems of gas analysis. However, the advantage of these methods is obvious, since the equipment is limited to a receiving device and the gas medium serves as a radiator. At the same time, in modern techniques, the interpretation of measurements of emissivities of gases is performed using a phenomenological approach such that experimental data on radiation characteristics of various objects are approximated by simple polynomial relations whose coefficients are determined by minimization methods. This approach does not allow one to investigate the mechanism of the processes occurring in a radiating medium and gives no way of solving the inverse problem of monitoring the composition and thermodynamic parameters of a medium which disturbs the atmosphere by thermal effects. In elaborating theoretical methods of gas analysis, the elaboration of the direct problem of calculation of radiating characteristics of gases is of importance, since it is not clear how the emissivity of a gas medium depends on its thermodynamic parameters. This paper is devoted to the above problem. Here, the error is estimated that arises in modeling a nonuniform gas medium with an actual temperature distribution, which linearly depends on coordinate, by a uniform gas layer. It is shown that the difference between the radiation intensities calculated for uniform and nonuniform media can be significant in the practically important case where the recording device is in a zone of normal temperatures. This implies that the error of reconstruction of the spectroscopic and molecular parameters of gaseous compounds from high-temperature measurements of the radiating and absorbing characteristics should take into account the thermodynamic nonuniformity of the medium.     

The effect of olefinic terminal chains on the mesomorphic properties of 4,4'-disubstituted diphenyldiacetylenes

New diphenyldiacetylenes of the type with A, B = H and/or F; m = 0, 1; n = 1-4; and X = C n H 2n + 1 , F, CF 3 or CN were synthesized and their mesomorphic properties determined by hot stage polarizing microscopy and DSC. When m = 0, all of these compounds showed only a nematic phase except when X = CF 3 when both nematic and smectic A phases were seen. Both clearing and melting temperatures were higher than those reported for substitution with the corresponding alkyl chains but the much larger increase in clearing temperatures produced considerably wider nematic phases. Eutectic mixtures of a few of these olefins yielded nematic materials also having much wider temperature ranges and higher clearing temperatures than the eutectic mixtures of the alkyl compounds, while retaining their high birefringence and low viscosities. Such materials are of interest for beam-steering devices.

Four of the diacetylenes with m = 1 ( A, B = H) were also prepared ( X = C 6 H 13 , F, n = 2, 3). When X was C 6 H 13 ( n = 2), the nematic range was smaller in the 2- than in the 1-olefin but wider than in the alkyl series. When X = F, either no nematic phase or a monotropic one was observed, whereas the 1-olefins gave a much wider nematic phase. Both transition temperatures were lower than those for the corresponding 1-olefin and alkyl analogues. The compound with X = C 6 H 13 and n = 2 had a melting temperature below room temperature.