The flow of a variable viscosity fluid between parallel plates with shear heating

A model for the flow of a fluid through a channel with parallel plates is investigated. The channel is narrow, so that the lubrication approximation may be applied. The channel walls are maintained at a constant temperature. Shear heating effects are included and the fluid viscosity decreases exponentially with temperature. When the flow is driven solely by shear stress or imposed velocity at the top, analytical progress is possible. When pressure gradient also drives the flow the problem is solved numerically.     

An improved approach for hydrogen analysis in metal samples using single laser-induced gas plasma and target plasma at helium atmospheric pressure

We report in this paper the results of an experimental study on hydrogen analysis of solid samples in high pressure helium ambient gas employing the basic scheme of laser induced breakdown spectroscopy (LIBS). It is shown that the metastable excited state of helium atom can be utilized to induce delayed excitation of the ablated hydrogen atoms, and thereby avoid the Stark broadening effect as well as overcoming the undesirable mismatch effect, which are responsible for inefficient excitation respectively. It is further demonstrated that for samples of high boiling-point materials such as zircaloy, successful hydrogen analysis can be achieved by a newly introduced double excitation technique employing single laser realized in a modified configuration of the conventional LIBS method. PACS 51-52     

Spatially resolved Raman spectroscopy evaluation of residual stresses in 3C-SiC layer deposited on Si substrates with different crystallographic orientations

Raman scattering studies were performed on hot-wall chemical vapor deposited (heteroepitaxial) silicon carbide (SiC) films grown on Si substrates with orientations of (1 0 0), (1 1 1), (1 1 0) and (2 1 1), respectively. Raman spectra suggested that good quality cubic SiC single crystals could be obtained on the Si substrate, independent of its crystallographic orientation. Average residual stresses in the epitaxially grown 3C-SiC films were measured with the laser waist focused on the epilayer surface. Tensile and compressive residual stresses were found to be stored within the SiC film and in the Si substrate, respectively. The residual stress exhibited a marked dependence on the orientation of the substrate. The measured stresses were comparable to the thermal stress deduced from elastic deformation theory, which demonstrates that the large lattice mismatch between cubic SiC and Si is effectively relieved by initial carbonization. The confocal configuration of the optical probe enabled a stress evaluation along the cross-section of the sample, which showed maximum tensile stress magnitude at the SiC/Si interface from the SiC side, decreasing away from the interface in varied rate for different crystallographic orientations. Defocusing experiments were used to precisely characterize the geometry of the laser probe in 3C-SiC single crystal. Based on this knowledge, a theoretical convolution of the in-depth stress distribution could be obtained, which showed a satisfactory agreement with stress values obtained by experiments performed on the 3C-SiC surface.     

Dynamics of molybdenum nano structure formation on the TiO2(1 1 0) surface: A kinetic Monte Carlo approach

The rutile TiO₂(1 1 0) surface is a highly anisotropic surface exhibiting “channels” delimited by oxygen rows. In previous experimental and theoretical DFT works we could identify the molybdenum adsorption sites. They are located inside the channels. Moreover, experimental studies have shown that during subsequent annealing after deposition, special molybdenum nano structures can be formed, especially two monolayer high pyramidal chains of atoms.In order to better understand the dynamics of nano structure formation, we present a kinetic Monte Carlo study on diffusion and adsorption of molybdenum atoms on a TiO₂(1 1 0) surface. A quasi one-dimensional lattice gas model has been used which describes the possible adsorption sites of a Mo atom in a single channel of the surface. The atomic positions of a 1.5 monolayer thick Mo film formed of pyramidal chains define the lattice sites of the model. Thereby the formation of three-dimensional clusters could be studied. Here we have studied the cluster formation as a function of parameters that can be controlled in a growth experiment by physical vapor deposition: deposition and annealing temperature, flux and total amount of deposited Mo. Good qualitative agreement with recent experiments is obtained.     

New methods for determining the volumetric flow rate in the column and the retention time of the unretained substance in gas chromatography

New methods for calculating the mean volumetric flow rate of the carrier gas and the retention time of the unretained substance in the column under conditions of gas chromatography were proposed. The methods are based on preliminary isothermal calibrations of the flow rate and holdup time for a packed column. A theoretical substantiation of the methods was given. Procedures of plotting calibration dependences for determining the indicated quantities at a desired temperature were described. The calculation results were compared to experimental data obtained by traditional methods. It was demonstrated that the use of calculation methods substantially simplifies the determination of the specific retention volume over a wide temperature range.     

Generalized green operator for an impulsive boundary-value problem with switchings

We establish constructive existence conditions and construct a generalized Green operator for the construction of solutions of a Noetherian linear boundary-value problem for a system of ordinary differential equations with switchings and pulse action in critical and noncritical cases. __________ Translated from Neliniini Kolyvannya, Vol. 10, No. 1, pp. 51–65, January–March, 2007.     

Synthesis of high-purity α- and β-PbO and possible applications to synthesis and processing of other lead oxide materials

Litharge, the red tetragonal form of lead oxide α-PbO and massicot, the yellow orthorhombic form β-PbO, are synthesized from lead(II) salts in aqueous media at elevated temperatures. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) were used to characterize the size, morphology, and crystallographic structural forms of the products. The role of impurities in the experimental synthesis of the materials and microstructural variations in the final products are described. The implications of these observations regarding the synthesis of different conducting lead oxides and other related materials are discussed. PACS 71.20.Ps; 72.80.Jc; 74.62.Bf; 74.62.Dh; 75.50.Tt     

Artificial time integration

Many recent algorithmic approaches involve the construction of a differential equation model for computational purposes, typically by introducing an artificial time variable. The actual computational model involves a discretization of the now time-dependent differential system, usually employing forward Euler. The resulting dynamics of such an algorithm is then a discrete dynamics, and it is expected to be “close enough” to the dynamics of the continuous system (which is typically easier to analyze) provided that small – hence many – time steps, or iterations, are taken. Indeed, recent papers in inverse problems and image processing routinely report results requiring thousands of iterations to converge. This makes one wonder if and how the computational modeling process can be improved to better reflect the actual properties sought. In this article we elaborate on several problem instances that illustrate the above observations. Algorithms may often lend themselves to a dual interpretation, in terms of a simply discretized differential equation with artificial time and in terms of a simple optimization algorithm; such a dual interpretation can be advantageous. We show how a broader computational modeling approach may possibly lead to algorithms with improved efficiency. AMS subject classification (2000)  65L05, 65M32, 65N21, 65N22, 65D18