TOPOLOGY DESIGN OF STRUCTURES SUBJECTED TO PERIODIC LOADING

Although a lot of attention in the topology optimization literature has focused on the optimization of eigenfrequencies in free vibration problems, relatively little work has been done on the optimization of structures subjected to periodic loading. In this paper, we propose two measures, one global and the other local, for the minimization of vibrations of structures subjected to periodic loading. The global measure which we term as the “dynamic compliance” reduces the vibrations in an overall sense, and thus has important implications from the viewpoint of reducing the noise radiated from a structure, while the local measure reduces the vibrations at a user-defined point. Both measures bring about a reduction in the vibration level by moving the natural frequencies which contribute most significantly to the measures, away from the driving frequencies, although, as expected, in different ways. Quite surprisingly, the structure of the dynamic compliance optimization problem turns out to be very similar to the structure of the static compliance optimization problem. The availability of analytical sensitivities results in an efficient algorithm for both measures. We show the effectiveness of the measures by presenting some numerical examples.     

Miscibility of bisphenol-A polycarbonate with poly(methyl methacrylate)

The miscibility of bisphenol-A polycarbonate (PC) with poly(methyl methacrylate) (PMMA) has been reexamined using differential scanning calorimetry (DSC) and optical indications for phase separation on heating, i.e., lower critical solution temperature (LCST) behavior. Various methods have been used to prepare the blends including methylene chloride (CH₂Cl₂) and tetrahydrofuran (THF) solution casting, melt mixing, and precipitation of PC and PMMA simultaneously from THF solution by using the nonsolvents methanol and heptane. It is shown that the resulting phase behavior for PC/PMMA blends is strongly affected by the blend preparation method. However, these blends are miscible over the whole blend composition range (unambiguous single composition-dependent T_g's and LCST behavior) when prepared by precipitation from solution using heptane as the nonsolvent. To the contrary, solution-cast and melt-mixed PC/PMMA blends were all phase separated, which may be attributed to the “solvent” effect and LCST behavior, respectively, not discovered in previous reports. Methanol precipitation does not lead to fully mixed blends, which demonstrates the importance of the choice of nonsolvent when using the precipitation method.     

Illumination dependence of I-V and C-V characterization of Au/InSb/InP(1 0 0) Schottky structure

The effects of surface preparation and illumination on electric parameters of Au/InSb/InP(100) Schottky diode were investigated, in the later diode InSb forms a fine restructuration layer allowing to block In atoms migration to surface. In order to study the electric characteristics under illumination, we make use of an He-Ne laser of 1 mW power and 632.8 nm wavelength. The current-voltage I(V_G), the capacitance-voltage C(V_G) measurements were plotted and analysed. The saturation current I_s, the serial resistance R_s and the mean ideality factor n are, respectively, equal to 2.03 × 10⁻⁵ A, 85 Ω, 1.7 under dark and to 3.97 × 10⁻⁵ A, 67 Ω, 1.59 under illumination. The analysis of I(V_G) and C(V_G) characteristics allows us to determine the mean interfacial state density N_ss and the transmission coefficient θ_n equal, respectively, to 4.33 × 10¹² eV⁻¹ cm⁻², 4.08 × 10⁻³ under dark and 3.79 × 10¹² eV⁻¹ cm⁻² and 5.65 × 10⁻³ under illumination. The deep discrete donor levels presence in the semiconductor bulk under dark and under illumination are responsible for the non-linearity of the C⁻²(V_G) characteristic.     

An optodynamic method for the real-time determination of the depth of a laser-drilled hole

An experimental method for determining the real-time depth of laser-drilled holes is presented. The proposed method involves detecting the laser-induced optoacoustic waves generated during the interaction of the laser beam with the material. Our optodynamic study involved measuring the propagation times of these waves as they traveled through the material and analyzing their temporal behavior during the drilling process. The experimental observations revealed an exponential relationship between the propagation time of the longitudinal stress wave and the number of consecutive laser pulses. Received: 25 October 2001 / Accepted: 27 October 2001 / Published online: 20 December 2001     

Finslerian Extension of Lorentz Transformations and First-Order Censorship Theorem

Granted the post-Lorentzian relativistic kinematic transformations are described in the Finslerian framework, the uniformity between the actual light-velocity anisotropy change and the anisotropic deformation of measuring rods can be the reason proper for the null results of the Michelson-Morley-type experiments at the first-order level.     

Expansion of monomer units in poly(ethylene terephthalate) molecules under conditions of thermal and zero-point atomic vibrations

The temperature dependence of the expansion ?_C of trans conformers of the carbon skeleton of macromolecules in crystallized and amorphous poly(ethylene terephthalate) (PET) due to zero-point and thermal atomic vibrations is investigated by IR spectroscopy. It is found that the thermal expansion coefficient β_C jumpwise increases at the characteristic temperatures T _t and T _b. This increase is associated with the crossover from the quantum to classical statistics of torsional and bending vibration modes. The quantum and classical contributions to the expansion ?_C are determined for each mode. The quantum and classical contributions of the torsional vibrational mode in the amorphous polymer are approximately 1.5 times larger than those in the crystallized polymer. This effect is caused by an increase in the anharmonicity of torsional vibrations in the amorphous polymer.     

Decay and fission of oriented nuclei

The angular distributions of fragments originating from the binary decay of oriented spherical and deformed nuclei are investigated with allowance for correct transformation properties of wave functions under time inversion. It is shown that, as in the case of protonic decay, the adiabatic approximation for collective rotational degrees of freedom of the systems under investigation is inapplicable in describing the angular distributions of fragments of the deep-subbarrier alpha and cluster decays of nuclei. It is demonstrated that this approximation is justified in describing spontaneous and induced low-energy nuclear fission. The dependence of partial fission widths on the orientation of intrinsic axes, spins, and projections of spins and relative orbital angular momenta of fission fragments is analyzed by using the formalism of the unified theory of nuclear reactions and the theory of open Fermi systems. It is shown that the adiabatic approximation leads to the coherent interference between the wave functions for the relative motion of fragments, whereby the universal angular distributions of fission fragments of oriented nuclei is formed. Deviations from the A. Bohr formula are investigated for these distributions.     

Stoner-Wohlfarth-type behavior of a close-packed array of high-anisotropy hexaferrite nanoparticles

Magnetization and remagnetization processes in a close-packed nanodispersed barium hexaferrite powder sample in the magnetically stable state were analyzed. Reversibility effects were discussed in terms of interparticle interaction. Judging from the magnetization curve and the parameters characterizing remagnetization irreversibility, the sample under study is a model system of small Stoner-Wohlfarth particles.     

Pseudomeasure character of the ultraspherical semigroups

We prove that the diffusion semigroups generated by the second order differential ultraspherical (Gegenbauer) operator are pseudomeasure operators.