Influence of disorder on superconductivity in non-magnetic rare-earth nickel borocarbides

The effect of substitutional disorder on the superconducting properties of YNi₂B₂C was studied by partially replacing yttrium and nickel by Lu and Pt, respectively. For the two series of (Y, Lu)Ni₂B₂C and Y(Ni, Pt)₂B₂C compounds, the upper critical field H _c2(T) and the specific heat c _p(T, H) in the superconducting mixed state have been investigated. Disorder is found to reduce several relevant quantities such as T _c, the upper critical field H _c2(0) at T=0 and a characteristic positive curvature of H _c2(T) observed for these compounds near T _c. The H _c2(T) data point to the clean limit for (Y, Lu) substitutions and to a transition to the quasi-dirty limit for (Ni, Pt) substitutions. The electronic specific heat contribution γ(H) exhibits significant deviations from the usual linear γ(H) law. These deviations reduce with growing substitutional disorder but remain even in the quasidirty limit which is reached in the Y(Ni_1−x , Pt _x )₂B₂C samples for x=0.1.     

Interactions between silica particles and poly(2-vinylpyridine) brushes in aqueous solutions of monovalent and multivalent salts

AFM colloidal probe technique, scratch tests, and spectroscopic ellipsometry are employed to study the conformation of a poly(2-vinyl pyridine) brush grafted to a planar surface and its interaction with microsized silica spheres in solutions containing monovalent (Cl^?) and multivalent counterions (SO₄ ^2? and PO₄ ^3?) at pH 2.5. During approach of the sphere, steric repulsion is observed with all salts at any concentration. The approach force-distance curves are fitted according to the Alexander-de Gennes model in order to calculate the equilibrium brush thickness L. These data are compared to the brush thickness determined by ellipsometry and AFM scratch tests. Different values are obtained but all of them decrease with increasing salt concentration. This effect is enhanced by counterions of higher valence because they have a stronger screening effect and ion correlation due to their greater charge per unit volume. With NaCl solutions, a reswelling of diluted P2VP coils is observed at Cl^? concentrations >1 M. When the sphere is retracted, weak adhesion forces occur at Cl^? concentrations >1.3?×?10^?2 M and at all concentrations of SO₄ ^2? and PO₄ ^3?.     

Microscopic mechanisms of spin-dependent electric polarization in 3d oxides

We present a short critical overview of different microscopic models for nonrelativistic and relativistic magnetoelectric coupling including the so-called “spin current scenario”, ab-initio calculations, and several recent microscopic approaches to a spin-dependent electric polarization in 3d oxides.     

Double‐Stimuli‐Responsive Spherical Polymer Brushes with a Poly(ionic liquid) Core and a Thermoresponsive Shell

The synthesis of poly(ionic liquid) (PIL) nanoparticles grafted with a poly(N‐isopropyl acrylamide) (PNIPAM) brush shell is reported, which shows responsiveness to temperature and ionic strength in an aqueous solution. The PIL nanoparticles are first prepared via aqueous dispersion polymerization of a vinyl imidazolium‐based ionic liquid monomer, which is purposely designed to bear a distal atom transfer radical polymerization (ATRP) initiating group attached to the long alkyl chain via esterification reaction. The size of the PIL nanoparticles can be readily tuned from 25 to 120 nm by polymerization at different monomer concentrations. PNIPAM brushes are successfully grafted from the surface of the poly(ionic liquid) nanoparticles via ATRP. The stimuli‐responsive behavior of the poly(ionic liquid) nanoparticles grafted with PNIPAM brushes (NP‐g‐PNIPAM) in aqueous phase is studied in detail. Enhanced colloidal stability of the NP‐g‐PNIPAM brush particles at high ionic strength compared to pure PIL nanoparticles at room temperature is achieved. Above the lower critical solution temperature (LCST) of PNIPAM, the brush particles remain stable, but a decrease in hydrodynamic radius due to the collapse of the PNIPAM brush onto the PIL nanoparticle surface is observed.

     

Superconductivity in the doped “pseudo-ladder” compound CaCu$_\mathsf{2}$O$_\mathsf{3}$

An effective anisotropic t-J model for the pseudo-ladder compound CaCu₂O₃ is proposed based on recent experimental studies and band structure calculations. Superconducting pairing mediated by the exchange interaction in the model is investigated as a function of doping away from the antiferromagnetic insulating state. It is shown that strong anisotropy in the electronic spectrum suppresses superconducting temperature in comparison with conventional copper-oxide superconductors with square lattices.     

A determination of the rate and heat of evaporation by measuring the radius variations of a metal tip

A new material loss technique for the experimental determination of the free evaporation rate of a metal is presented. This technique is based on the study of tip profile changes. The tip radius variation is a consequence of the simultaneous action of free evaporation and surface self-diffusion. The rate of free evaporation is related to the tip radius evolution, so the vapor pressure and heat of evaporation can be determined by measuring in situ the radius changes with time. The method permits an easy control of the cleanliness of the surface by field electron microscopy, and should enable one to study the influence of adsorption on evaporation. The method is tested with molybdenum tips. The variation of the radius of the tips, heated in ultra-high vacuum, is determined by field electron and scanning microscope measurements. Vapor pressures and heat of evaporation values obtained are in agreement with values obtained by other techniques.     

Measurement of transverse single-spin asymmetries for Dijet production in proton-proton collisions at sqrt[s]=200 GeV

We report the first measurement of the opening angle distribution between pairs of jets produced in high-energy collisions of transversely polarized protons. The measurement probes (Sivers) correlations between the transverse spin orientation of a proton and the transverse momentum directions of its partons. With both beams polarized, the wide pseudorapidity (-1< or = eta < or = +2) coverage for jets permits separation of Sivers functions for the valence and sea regions. The resulting asymmetries are all consistent with zero and considerably smaller than Sivers effects observed in semi-inclusive deep inelastic scattering. We discuss theoretical attempts to reconcile the new results with the sizable transverse spin effects seen in semi-inclusive deep inelastic scattering and forward hadron production in pp collisions.     

Electrokinetic investigation of surfactant adsorption

Fuerstenau [D.W. Fuerstenau, in: M.L. Hair (Ed.), Dekker, New York, 1971, p. 143] has already discussed the role of hydrocarbon chain of surfactants, the effect of alkyl chain length, chain structure and the pH of the solution on the adsorption process of surfactants. Later Kosmulski [M. Kosmulski, Chemical Properties of Material Surfaces, Surfactant Science Series, vol. 102, Dekker, New York, Basel, 2001] included the effect of surfactant concentration, equilibration time, temperature and electrolyte in his approaches. Certainly, the character of the head groups of the surfactant and the properties of the adsorbent surface are the basis for the adsorption process. Different surfactants and adsorbents cause different adsorption mechanisms described firstly by Rosen [M.J. Rosen, Surfactants and Interfacial Phenomena, second ed., Wiley, New York, 1989]. These adsorption mechanisms and their influencing factors were studied by electrokinetic investigations. Here only changes of the charges at the surfaces could be detected. To control the results of electrokinetic investigations they were compared with results from ellipsometric measurements. In the case of surfactant adsorption the chain length was vitally important. It could be shown by the adsorption of alkyl trimethyl ammonium bromides onto polymer films spin coated at wafer surfaces. The influence of the chain length depending on surface properties of the polymer film was studied. Streaming potential measurements were applied for these investigations. The obtained results enabled us to calculate the molar cohesive free energy per mol of CH2-group in the alkaline chain of the surfactant if all other specific adsorption effects were neglected.     

Janus discs

We describe the synthesis and the solution properties of sheet- and disclike Janus particles, containing an inner crosslinked polybutadiene (PB) layer and two different outer sides of polystyrene (PS) and poly(tert-butyl methacrylate) (PtBMA). The structures formed upon adsorption of the flat Janus particles onto solid substrates as well as in THF solution are investigated. The Janus discs are obtained in a template-assisted synthetic pathway followed by sonication. Selectively crosslinking the lamellar PB domains in a well-ordered lamellar microphase-separated bulk morphology of PS-block-PB-block-PtBMA (SBT) block terpolymers leads to the conservation of the compartmentalization of the two outer blocks. Sonication of the crosslinked block terpolymer templates renders soluble sheet- and disclike Janus particles, the size of which can be tuned from the micrometer range down to the nanometer scale. Small-angle X-ray scattering, transmission electron microscopy, dynamic light scattering, scanning force microscopy, and scanning electron microscopy are used to characterize the template-assisted synthetic process and the solution properties. Cryogenic transmission electron microscopy in THF and TEM of particles, embedded into a photo-crosslinkable silicon oil, indicate a supramolecular aggregation behavior of the Janus discs in concentrated solutions. Pendant drop tensiometry demonstrates that Janus sheets and discs can be used to stabilize liquid-liquid interfaces, rendering these materials interesting for future applications.