Determination of tributyltin oxide in coastal marine sediments and mussels by electrothermal atomic absorption spectrometry

We have devised a new method for bis(tributyltin)oxide (TBTO) determination in marine sediments and mussels. This technique involves an n-hexane/methylene chloride mixture extraction and extract purification with a sodium hydroxide wash in order to eliminate interfering compounds. TBTO is then extracted again by nitric acid and converted into an inorganic tin species; the analysis has been effected using Zeeman graphite furnace-atomic absorption spectrophotometry. The method detection limit for the matrices examined is 0.004 μg TBTO g^?1 (wet weight) and is sufficient for the analysis in real samples. The percentage recovery of TBTO from sediments and mussels samples is higher than 85% and 95% respectively. This method has been applied to TBTO level determination in sediments and mussels (Mytilus galloprovincialis) sampled in the harbour area in Taranto, where mussel culture activities are much developed; the TBTO levels obtained in sediments and mussels were in the range 15-47 ng g^?1 (wet weight) and 11-30 ng g^?1 (wet weight) respectively. Such values are comparable with those found in other harbour areas in the Mediterranean Sea.     

Certification of the sulphur content of three rapeseed reference materials

Summary The sulphur content of three rapeseed reference materials has been certified on the basis of measurements made by inductively coupled plasma-optical emission spectroscopy, isotope-dilution mass spectrometry and ion chromatography. Their suitability for the calibration of x-ray fluorescence spectrometers used for measuring sulphur in rapeseed samples was established.     

Strings at nonzero temperature

String theory at nonzero temperature is reviewed. A bosonic string at nonzero temperature is studied and the calculation of its free energy in both the one-loop approximation and the case of arbitrary genus (multiloop analysis) is discussed. A string at nonzero temperature is compared with a string compacted on a one-dimensional torus. The properties of modular invariance and dual symmetry are discussed at both the one-loop and multiloop levels. The thermodynamics of superstrings, including also superstrings compactified on a torus, is also studied. Possible cosmological applications are briefly considered. It is shown that many features of string thermodynamics (in particular, the existence of the Hagedorn temperature and dual symmetry) also occur in the theory of noncritical strings.Translated from Izvestiya Vysshykh Uchebnykh Zavedenii, Fizika, No. 12, pp. 3–49, December, 1991.     

Single-molecule single crystals

Various approaches to the preparation and verification of single-molecule single crystals are discussed for polyethylene and poly (oxyethylene). Analytic tools are electron microscopy, electron diffraction, and differential scanning calorimetry. The main difficulty in producing a single-molecule single crystal is to keep crystals from joining during growth.     

Estimation of the exchange constants in the Fe sublattice of the Y2Fe17 and Y2Fe17N3−δ compounds from the analysis of Mössbauer measurements

From the analysis of Mössbauer data for Y₂Fe₁₇ and Y₂Fe₁₇N_3−δ at various temperatures the hyperfine fields for 4f, 6g, 12j, 12k iron sites were estimated as a function of temperature. The reduced magnetizations calculated from the values of the hyperfine fields are fitted with a mean field model for four interacting sublattices using a computer program. The estimated exchange interaction from the fitting procedure between the 4f sites is found strongly negative (antiferromagnetic) in Y₂Fe₁₇ whereas in Y₂Fe₁₇N_3−δ it increases and becomes weak negative following a modified Slater-Néel curve. The rest of the exchange interactions are found positive or weak negative depending on the distances between the Fe atoms.     

Influence of preparation methods on structure and properties of PA6/PA66 blends: A comparison of melt‐mixing and in situ blending

The blends composed of polyamide 6 (PA6) and polyamide 66 (PA66) were obtained using two different preparation methods, one of which was the melt‐mixing through a twin‐screw extruder and the subsequent injection molding; and the other, the in situ blending through anionic polymerization of ε‐caprolactam in the presence of PA66. For the former, there existed a remarkable improvement in toughness but a drastic drop in strength and modulus; however, for the latter, a reverse but less significant trend of mechanical properties change appeared. Various characterizations were conducted, including the analyses of crystalline morphology, crystallographic form, and crystallization and melting behaviors using polarized optical microscopy (POM), wide‐angle X‐ray diffraction (WAXD), and differential scanning calorimetry (DSC), respectively; observation of morphology of fractured surface with scanning electron microscope (SEM); measurement of glass transition through dynamic mechanical analysis (DMA); and the intermolecular interaction as well as the interchange reaction between the two components by Fourier transform infrared spectrometry (FT‐IR) and ¹³C solution NMR. The presence and absence of interchange reaction was verified for the in situ and melt‐mixed blends, respectively. It is believed that the transreaction resulted in a drop in glass transition temperature (T_g) for the in situ blends, contrary to an increase of T_g with increasing PA66 content for the melt‐mixed ones. And the two kinds of fabrication methods led to significant differences in the crystallographic form, spherulite size and crystalline content and perfection as well. Accordingly, it is attempted to explain the reasons for the opposite trends of changes in the mechanical properties for these two blends. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1176–1186, 2007     

Eulerian limit for 2D Navier-Stokes equation and damped/driven KdV equation as its model

We discuss the inviscid limits for the randomly forced 2D Navier-Stokes equation (NSE) and the damped/driven KdV equation. The former describes the space-periodic 2D turbulence in terms of a special class of solutions for the free Euler equation, and we view the latter as its model. We review and revise recent results on the inviscid limit for the perturbed KdV and use them to suggest a setup which could be used to make a next step in the study of the inviscid limit of 2D NSE. The proposed approach is based on an ergodic hypothesis for the flow of the 2D Euler equation on iso-integral surfaces. It invokes a Whitham equation for the 2D Navier-Stokes equation, written in terms of the ergodic measures. Dedicated to Vladimir Igorevich Arnold on his 70th birthday     

Synthesis and thermal behaviour of salicylaldimine-based liquid crystalline symmetrical dimers

A series of symmetrical dimers consisting of salicylaldimine moieties connected by flexible alkylene central spacer via ether linkages has been synthesized. In order to validate the empirical rule suggested by Date et al. to account for the smectic behaviour of such dimers, the chain length of the terminal alkoxy chain has been kept constant (C₈) while the number of methylene units in the central spacer was varied from C₃ to C₁₁. Another aim of the present investigation was to understand structure-property relationship in these dimers in which the salicylaldimine mesogenic segment has been used for the first time in dimers. The mesomorphic behaviour of these dimers was evaluated using optical microscopy and differential scanning calorimetry and the structure of some of the mesophases has been further investigated with the help of X-ray diffraction. Our studies reveal that the dimers consisting of 3 to 8 methylene units in the flexible spacer show only smectic (smectic C and smectic A) phases. For the dimers containing 4, 6 and 8 methylene units in the central spacer, a unique filament growth pattern has been observed in the smectic A phase while cooling from the isotropic phase. The dimers containing of C₉ to C₁₁ methylene groups exhibit the nematic phase in addition to smectic modifications. This observation indicates that when the terminal chains are shorter than the spacer, the tendency to form smectic phases is not fully extinguished but is perhaps reduced.     

Moving and oscillating transversely one-dimensional laser solitons

Transversely one-dimensional moving and oscillating solitons in a wide-aperture laser with saturable absorber with fast (inertialess) nonlinearity are found by numerical simulation. The regions of existence of such solitons and of their complexes are presented.