Roles of SiH4 and SiF4 in growth and structural changes of poly-Si films

The structural properties of polycrystalline silicon films, prepared by plasma enhanced chemical vapor deposition system, with different flow rates of SiH₄/SiF₄ mixtures at 300 °C were investigated. This study indicates that the low hydrogen coverage on the growing surface, under optimum fluorine radicals, will be leaded to an improvement of crystallized area as compared with case of high hydrogen coverage surface. Moreover, the studies of the role of SiH₄ and SiF₄ radicals show that the SiH₄ radicals are important in the nucleation and growth of grains. However, SiF₄ radicals are effective in the structural change of grain boundaries regions and by this way, in the present system, establish the growth of grains under the dominant 〈1 1 0〉 direction. The stress investigation indicates that addition of high flow rate of SiF₄ in amorphous film, results in the nearly stress free films. Finally, we found that the changes in g-value reflect the changes in the intrinsic compressive and tensile stress in the both polycrystalline and amorphous silicon films.     

Periodic Integrable Systems with Delta-Potentials

In this paper we study root system generalizations of the quantum Bose-gas on the circle with pair-wise delta-function interactions. The underlying symmetry structures are shown to be governed by the associated graded algebra of Cherednik's (suitably filtered) degenerate double affine Hecke algebra, acting by Dunkl-type differential-reflection operators. We use Gutkin's generalization of the equivalence between the impenetrable Bose-gas and the free Fermi-gas to derive the Bethe ansatz equations and the Bethe ansatz eigenfunctions.     

Application of rainbow schlieren deflectometry to measure temperature and oxygen concentration in a laminar gas-jet diffusion flame

The quantitative rainbow schlieren deflectometry (RSD) technique was applied to measure temperature and oxygen concentration in an axisymmetric hydrogen gas-jet diffusion flame burning in quiescent air at fuel jet exit Reynolds number of 70. Schlieren measurements were compared with conventional measurements using a thermocouple and a gas-sampling probe. Good agreement between the two measurement techniques was achieved on the fuel-lean side of the flame.     

Velocity measurements in liquid sodium by means of ultrasound Doppler velocimetry

A successful application of ultrasound Doppler velocimetry in liquid sodium flows is described. To obtain sufficient Doppler signals, different problems had to be solved: the transmission of the ultrasonic beam through the channel wall made of stainless steel, the acoustic coupling between the transducer and the channel wall, and the wetting of the inner surface of the wall by the liquid metal, respectively. A sodium flow in a square duct exposed to a transverse magnetic field is investigated. In accordance with the existing knowledge about MHD channel flows, we found that the velocity profiles modified to a M-shape owing to the effect of an inhomogeneous magnetic field. Received: 12 June 2001/Accepted: 27 October 2001     

Necessary Conditions for Differentiability of Distance Functions

Necessary conditions for the Gâteaux differentiability of the distance function to a set are considered. A series of characterizing results is obtained.     

On iteration semigroups of mean-type mappings and invariant means

Summary. Iteration semigroups of weighted quasi-arithmetic mean-type mappings are considered. Existence and uniqueness of a mean which is invariant with respect to a continuous semigroup of mean-type mapping is proved.     

Numerical solutions of the shallow water equations with discontinuous bed topography

A simple scheme is developed for treatment of vertical bed topography in shallow water flows. The effect of the vertical step on flows is modelled with the shallow water equations including local energy loss terms. The bed elevation is denoted with z_b^‐ for the left and z_b⁺ for the right values at each grid point, hence exactly representing a discontinuity in the bed topography. The surface gradient method (SGM) is generalized to reconstruct water depths at cell interfaces involving a vertical step so that the fluxes at the cell interfaces can accurately be calculated with a Riemann solver. The scheme is verified by predicting a surge crossing a step, a tidal flow over a step and dam‐break flows on wet/dry beds. The results have shown good agreements compared with analytical solutions and available experimental data. The scheme is efficient, robust, and may be used for practical flow calculations. Copyright © 2002 John Wiley & Sons, Ltd.