A manifestation of magnetism of bismuth in iron garnet films

Bismuth iron garnet films prepared through electron-beam and laser-induced evaporation on (001)-oriented substrates of scandium gallium gadolinium garnet are investigated using ferromagnetic resonance. It is assumed that the additional minima observed in the angular dependence of the resonance field can be associated with the magnetic moment of bismuth ions.     

Recording and reading of three-dimensional optical memory in glasses

We report on three-dimensional (3D) optical memory recording and reading in glass by femtosecond pulses. Optically induced dielectric breakdown of glass is a mechanism of recording. The formulae of dielectric breakdown presented are applicable, in principle, for any crystalline or amorphous dielectric material. Scaling dependences of the probabilities of multi-photon and impact ionization are given. The measured threshold of an in-bulk dielectric breakdown of silica was reproduced numerically by implementing the ionization potential of Si (8.15 eV) for calculations. Exact measures of focal spot size and pulse duration at the focus allowed us to evaluate the intensity of a pulse during recording of 3D optical memory bits with high accuracy. The readout of the 3D optical memory was carried out by the white-light continuum generated from the previously damaged sites (recorded memory bits). The mechanism of the readout was a four-photon parametric interaction. PACS 42.65.Jx; 42.65.Ky; 42.70.Ce; 42.79.Vb     

Banach-stone theorems and separating maps

LetC(X,E) andC(Y,F) denote the spaces of continuous functions on the Tihonov spacesX andY, taking values in the Banach spacesE andF, respectively. A linear mapH:C(X,E)→C(Y,F) isseparating iff(x)g(x)=0 for allx inX impliesHf(y)Hg(y)=0 for ally inY. Some automatic continuity properties and Banach-Stone type theorems (i.e., asserting that isometries must be of a certain form) for separating mapsH between spaces of real- and complex-valued functions have already been developed. The extension of such results to spaces of vector-valued functions is the general subject of this paper. We prove in Theorem 4.1, for example, for compactX andY, that a linear isometryH betweenC(X,E) andC(Y,F) is a “Banach-Stone” map if and only ifH is “biseparating (i.e,H andH ⁻¹ are separating). The Banach-Stone theorems of Jerison and Lau for vector-valued functions are then deduced in Corollaries 4.3 and 4.4 for the cases whenE andF or their topological duals, respectively, are strictly convex. Research supported by the Fundació Caixa Castelló, MI/25.043/92     

Convergence of optimal controls in some optimization problems

We consider the behavior of bundles of optimal controls when the initial state of the system goes to some given vector. We investigate three types of optimization problems: problems with fixed process length and a free right endpoint; problems with fixed process length and a fixed right endpoint; time-optimal problems. The article is a review of recent results obtained by the author. __________ Translated from Nelineinaya Dinamika i Upravlenie, No. 4, pp. 301–314, 2004.     

Necessary first-order conditions for optimal crossing of a given region

We consider a nonlinear optimal control problem with an integral functional in which the integrand is the characteristic function of a closed set in the phase space. An approximation method is applied to prove the necessary conditions of optimality in the form of a Pontryagin maximum principle without any prior assumptions on the behavior of the optimal trajectory. Similarly to phase-constrained problems, we derive conditions of nondegeneracy and pointwise nontriviality of the maximum principle. __________ Translated from Nelineinaya Dinamika i Upravlenie, No. 4, pp. 179–204, 2004.     

Magnetic structure and transport properties of atomically disordered crystals of two-dimensional manganites La2−2x Sr1+2x Mn2O7

The magnetic structure and transport properties of partially disordered crystals of two-dimensional manganites La_2?2x Sr_1+2x Mn₂O₇ (x = 0.3, 0.4) are studied over a wide range of temperatures. The crystals are transformed into an atomically disordered state under irradiation with fast neutrons at a dose of 2 × 10¹⁹ cm^?2. The average concentration of substitutional defects in the crystal is ≈4%. It is found that substitutional defects are responsible for the transition of these manganites from the ferromagnetic metal state to the insulator state with a spin glass structure. The results obtained are discussed in terms of the ratio between the kinetic energy of charge carriers and the exchange energy of localized spins.     

Light scattering by aggregates of magnetite nanoparticles in a magnetic field

The effect of variation of the scattered light intensity in a magnetic fluid with aggregates of magnetite particles several microns in size under the action of a magnetic field is studied. The effect relaxation times are determined when the magnetic field is turned on and off. This effect is found to be caused by the orientation of anisotropically magnetized aggregates. Experimental data are used to calculate the average anisotropy of the magnetic susceptibility of the aggregate and estimate its magnetic permeability.     

Graphitic nanofillers in PMMA nanocomposites—An investigation of particle size and dispersion and their influence on nanocomposite properties

Mechanical, thermal, and electrical properties of graphite/PMMA composites have been evaluated as functions of particle size and dispersion of the graphitic nanofiller components via the use of three different graphitic nanofillers: “as received graphite” (ARG), “expanded graphite,” (EG) and “graphite nanoplatelets” (GNPs) EG, a graphitic materials with much lower density than ARG, was prepared from ARG flakes via an acid intercalation and thermal expansion. Subsequent sonication of EG in a liquid yielded GNPs as thin stacks of graphitic platelets with thicknesses of ～10 nm. Solution‐based processing was used to prepare PMMA composites with these three fillers. Dynamic mechanical analysis, thermal analysis, and electrical impedance measurements were carried out on the resulting composites, demonstrating that reduced particle size, high surface area, and increased surface roughness can significantly alter the graphite/polymer interface and enhance the mechanical, thermal, and electrical properties of the polymer matrix. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2097–2112, 2007     

Gas solubility of carbon dioxide in poly(lactic acid) at high pressures: Thermal treatment effect

The sorption of carbon dioxide in glassy Poly(lactic acid) (PLA) films was studied by quartz crystal microbalance (QCM) at high pressures. Two thermal treatments, melted and quenched, were performed in PLA with two different L:D contents, 80:20 and 98:2, films and compared with a third thermal protocol, annealed, and used in a previous work. The results obtained show that for pressures higher than 2 MPa, the carbon dioxide solubility is larger in PLA 80:20 than in PLA 98:2, indicating that the L:D plays a dominant role on this property. The thermal treatments only affect the gas solubility in PLA 98:2. Sorption isotherms at temperatures 303, 313, and 323 K, below the glass transition temperature of the polymer, and pressures up to 5 MPa were measured and analyzed with three different models, the dual‐mode sorption model, the Flory–Huggins equation, and a modified dual‐mode sorption model where the Henry's law term was substituted by the Flory–Huggins equation. This last model performs especially well for CO₂ in PLA 80:20, due to the convex upward curvature of the solubility isotherms for that system. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 616–625, 2007