Effect of Organic Ligands Used in Sol-Gel Process on the Formation of Mullite

The preparation of mullite by the sol-gel method using organic polydentate ligands and the effect of the raw materials and organic polydentate ligands on the formation of mullite were investigated. Two series of samples were prepared using tetraethoxyorthosilicate (TEOS) and aluminum nitrate nonahydrate, or dibutoxyethylacetoacetatoaluminum (Al(OBu)₂(AcAcEt)) as the silica and alumina sources, respectively, and using ethylene glycol (EG), 1,3-propanediol (PD), 1,3-butanediol (BD), 2-methyl-2, 4-pentanediol (MPD), diethlene glycol monoethyl ether (DEME) and ethoxyethanol as the ligands. When the alumina source was aluminum nitrate nonahydrate, mullite was apt to appear in the order of EG>PD>MPD. When Al(OBu)₂(AcAcEt) was the alumina source, the tendency toward the appearance of mullite crystalline phase was EG>BD>DEME>MPD. Between the two alumina sources, aluminum nitrate nonahydrate gave mullite much easier than Al(OBu)₂(AcAcEt). These relationships were discussed from the viewpoints of the coordination ability of the ligands and the miscibility between the silica and alumina.     

Design and synthesis of novel type somatostatin analogs with antiproliferative activities on A431 tumor cells

It was reported that the somatostatin analog TT-232, d-Phe-c(Cys-Tyr-d-Trp-Lys-Cys)-Thr-NH₂, exhibited a highly potent antitumor activity in vitro and in vivo. Using pyrazinone analogs and aliphatic amino acids instead of the disulfide bond, we prepared novel type somatostatin analogs including the sequence essential for antitumor activities, Tyr-d-Trp-Lys. These analogs exhibited antiproliferative effect on A431 tumor cells.     

Kinetic study of the electron-transfer oxidation of the phenolate anion of a vitamin E model by molecular oxygen generating superoxide anion in an aprotic medium

Electron-transfer reduction of molecular oxygen (O2) by the phenolate anion (1-) of a vitamin E model, 2,2,5,7,8-pentamethylchroman-6-ol (1H), occurred to produce superoxide anion, which could be directly detected by a low-temperature EPR measurement. The rate of electron transfer from 1- to O2 was relatively slow, since this process is energetically unfavourable. The one-electron oxidation potential of 1- determined by cyclic voltammetric measurements is sufficiently negative to reduce 2,2-bis(4-tert-octylphenyl)-1-picrylhydrazyl radical (DOPPH*) to the corresponding one-electron reduced anion, DOPPH-, suggesting that 1- can also act as an efficient radical scavenger.     

Synthesis and pharmacological evaluation of pyrroloazepine derivatives as potent antihypertensive agents with antiplatelet aggregation activity

A series of 1-aminoalkyl-pyrrolo[2,3-c]azepin-8-one derivatives was synthesized and evaluated as alpha 1 adrenergic and serotonin 2 (5-HT2) receptor antagonists, with the aim of finding a novel antihypertensive agent potently exhibiting both activities. Some compounds with a 4-[4-(4-fluorobenzoyl)piperidino]butyl group at the 1-position exhibited both activities, and varied significantly in terms of the substituents at the 4-position of the pyrroloazepine ring. Among the compounds obtained in this study, (E)-1-[4-[4-(4-fluorobenzoyl)piperidino]-butyl]-4-hydroxyimino-7- methyl-1,4,5,6,7,8-hexahydropyrrolo[2,3-c]azepin-8-one (15a, SUN9221) displayed potent alpha 1-adrenergic antagonistic activity (pA2 = 8.89 +/- 0.21) and 5-HT2 antagonistic activity (pA2 = 8.74 +/- 0.22) in isolated guinea pig arteries. This compound exhibited antihypertensive activity and a duration of action equivalent to orally administered prazosin or doxazosin, 3 mg/kg, in conscious spontaneously hypertensive rats, as well as potent antiplatelet aggregation activity.     

Comparative characterization study of microporous carbons by HRTEM image analysis and gas adsorption

The present work presents a useful comparison of micropore size distributions (MPSDs) obtained from gas adsorption and image analysis of high-resolution transmission electron micrographs. It is shown that the MPSD obtained for a chemical activated carbon is concordant with that obtained from CO2 adsorption. In addition, this technique has allowed us to obtain the MPSD of a carbon molecular sieve (CMS) prepared in our laboratory by a copyrolysis process, which could only be characterized by CO2 adsorption at 273 K (not by N2 adsorption at 77 K due to diffusional problems). The MPSD obtained by high-resolution transmission electron microscopy (HRTEM) for the CMS is wider than that obtained by CO2 adsorption, suggesting that HRTEM is detecting the closed porosity existing in this sample, which is not accessible to gas adsorption. The existence of closed porosity in the CMS is explained considering the preparation method used. Thus, HRTEM combined with image analysis seems to be useful for structural analysis of narrow micropores including closed porosity.     

Synthesis of Indolones via Radical Cyclization of N‐(2‐Halogenoalkanoyl)‐Substituted Anilines

The radical reactions of N‐(2‐halogenoalkanoyl)‐substituted anilines (anilides) of type 1 have been investigated under various conditions. Treatment of compounds 1a – 1o with Bu₃SnH in the presence of (2,2′‐azobis(isobutyronitrile) (AIBN) afforded a mixture of the indolones (oxindoles) 2a – 2o and the reduction products 5a – 5o (Table 1). In contrast, the N‐unsubstituted anilides 1p – 1s, 1u , and 1v gave the corresponding reduction products exclusively (Table 1). Similar results were obtained by treatment of 1 with Ni powder (Table 2) or wth Et₃B (Table 3). Anilides with longer N‐(phenylalkyl) chains such as 6 and 7 were inert towards radical cyclization, with the exception of N‐benzyl‐2‐bromo‐N,2‐dimethylpropanamide ( 6b ), which, upon treatment with Ni powder in i‐PrOH, afforded the cyclized product 9b in low yield (Table 4). Upon irradiation, the extended anilides 6, 7, 10 , and 11 yielded the corresponding dehydrobromination products exclusively (Table 5).     

Output and picosecond amplification characteristics of an efficient and high-power discharge excimer laser

Improvements in output pulse energy and efficiency of a conventional capacitor-transfer-type discharge excimer laser with automatic preionization have been achieved by extending the discharge volume and resulting moderate pumping of the active medium. The discharge laser produces a pulse energy of more than 1 J for XeCl, KrF, and ArF lasers in square beams of about 2×2 cm², and the maximum overall efficiency observed is 2.9% for XeCl, 3.2% for KrF and 1.8% for ArF. The laser device has been involved in a picosecond ( 32 ps) XeCl laser amplification system, and was operated as an amplifier at a repetitive frequency of 10 Hz. Saturation fluence for XeCl laser was measured to be 1.4 mJ/cm², and the picosecond pulse energy of 40 mJ was extracted from the amplifier.On leave from Ebara Corp., 6-6-7, Ginza, Chuo-ku, Tokyo 104, JapanOn leave from Mitsubishi Heavy Industries, LTD., 4-6-22, Kan-on shinmachi, Nishi-ku, Hiroshima 733, Japan     

Diethylhydrogensilyl cyclic diethylsilylene derivatives in gas chromatography/mass spectrometry of hydroxylated steroids. III-Fragmentations of 5β-pregnane-17,20,21-triol derivatives

A reaction of N,O-bis-(diethylhydrogensilyl) trifluoroacetamide with 5β-pregnane-17,20,21-triols afforded diethylhydrogensilyl (DEHS) cyclic diethylsilylene (DES) derivatives. 5β-Pregnane-3α,17α,20β,21-tetraol yielded the 3α,21-bis-DEHS-17α,20β-DES compound, whereas the structure of the major product from its 20α isomer was assigned as the 3α,17α-bis-DEHS-20α,21-DES derivative, which would undergo facile isomerization to the unstable 3α,21-bis-DEHS-17α,20α-DES structure under electron ionization. Fragmentations of these DEHS-DES compounds are discussed on the basis of isotope labelling experiments, linked scanning data, and accurate mass measurements.     

Studies on the mechanism of 1,2-dihydropyrazin-2-one ring formation from dipeptidyl chloromethyl ketone and its chemical properties: immediate deamination during catalytic hydrogenation

1,2-Dihydropyrazin-2-one derivatives, which have two aminoalkyl groups at the positions 3 and 6, were found to be efficient tools for the construction of potent, selective and long-acting opioid mimetics. During the course of preparation, we found that the catalytic hydrogenation of 3,6-bis(benzyloxycarbonylaminomethyl)-5-methyl-1,2-dihydropyrazin-2-one to remove the benzyloxycarbonyl groups resulted in a side reaction. By MS and NMR studies and by preparation of additional 1,2-dihydropyrazin-2-one derivatives, the structure of the by-product was identified as 3-aminomethyl-5,6-dimethyl-1,2-dihydropyrazin-2-one. Preparation of additional compounds substituted with deuterium provided us with sufficient information to confirm the structure of the product and to support a cyclization mechanism in its formation.