Nonclassical urea oligomers. IV. Polymerization of (S)-1-(N-phenyl-carbamoyl)-2-methylaziridine. A synthesis of optically active crystalline oligomer with narrow molecular weight distribution

In the presence of Et₂SO₄, (S)-1-(N-phenyl-carbamoyl)-2-methylaziridine gave an oligomer with a structure of [CH₂? CHCH₃? N(CONHPh)]_n. The oligomer has optically active isotactic configuration and narrow molecular weight distribution (DP ca. 8). The net polymerization behavior of the monomer and chemical property, such as absorptivity of Et₂SO₄, of the oligomer are analogous to the case of 1-(N-phenyl-carbamoyl)-aziridine. The ring opening occurs with retention of the configuration at the asymmetric carbon atom and the oligomer can be crystallized at around 90°C.     

Solvent effects on the radiation-induced graft polymerization of styrene onto poly(isobutylene oxide)

The graft polymerization of styrene onto preirradiated poly(isobutylene oxide) (PIBO) with methanol and benzene was studied. The order of grafting yield and of the number-average molecular weight of graft chains decrease in the order; undiluted styrene > styrene–methanol (1:1) solution > styrene–benzene (1:1) solution. A kinetic treatment to calculate rate constants from the rate of grafting and the molecular weight of the graft chain was proposed. The propagation rate constant k_p was 0.2–0.3 l./mole-sec and the termination rate constant k_t was 1.0–16.0 l./mole-sec. The ratio k_p/k_t in this heterogeneous system was larger than that in homogeneous system by a factor of about 10⁴–10⁵.     

Ferrocene-containing polymers. II. Radiation-induced copolymerizations of ferrocenylmethyl methacrylate with styrene,methyl methacrylate,and ethyl acrylate

Ferrocenylmethyl methacrylate (FMMA) was copolymerized with styrene (St), methyl methacrylate (MMA), and ethyl acrylate (EA) in benzene solution at 25°C by γ radiation. The reactions proceeded by a free radical mechanism, and monomer reactivity ratios were derived by the Tidwell–Mortimer method for St(M₁)–FMMA(M₂), r₁ = 0.35 and r₂ = 0.46; for MMA(M₁–FMMA)(M₂), r₁ = 0.85 and r₂ = 1.36; for EA(M₁)–FMMA(M₂), r₁ = 0.36 and r₂ = 3.03. The Q and e values of FMMA determined from copolymerization with St were 0.97 and 0.55, respectively. Terpolymerization of a MMA–FMMA–EA system based on the Alfrey–Goldfinger equations was studied. This is a typical terpolymerization system in which reactivities of the monomers obey the Q–e scheme. Comparing the results obtained here with those previously reported for other monomers, we concluded that FMMA is one of the most highly reactive monomers among alkyl methacrylates.     

Supramolecular porphyrin assemblies through amidinium-carboxylate salt bridges and fast intra-ensemble excited energy transfer

Well‐defined supramolecular assemblies of Zn and free‐base porphyrins are constructed through the formation of amidinium–carboxylate salt bridges. A one‐to‐one donor–acceptor pair and a four‐to‐one antenna‐type assembly are investigated. The steady‐state and time‐resolved fluorescence measurements unequivocally showed that efficient singlet–singlet excited energy transfer from the Zn–porphyrin complex to the free‐base porphyrin takes place in these assemblies. Indeed, the observed energy‐transfer rates in both types of assemblies are much faster than those the Förster mechanism would suggest, implying the involvement of an intermolecular through‐bond mechanism.     

Photoinduced electron transfer at the polymer-solution interface. II. Effects of ionic environment

Three types of polymer electron transfer sensitizer were prepared by copolymerization of 1-pyrenylmethyl methacrylate with styrene (I), vinylbenzyltriethylammonium chloride (II), and sodium p-styrenesulfonate (III). Irradiation of the pyrenyl group in the presence of leuco crystal violet (LCV), in homogeneous or in heterogeneous systems, induced the formation of crystal violet cation (CV⁺) in air. The reactivity of I, II, and III was in the order of II > I > III in both systems; this was rationalized in terms of the Coulombic effect. The effect of charge is much greater for the heterogeneous systems. High-charge density on the polymer surface and enhanced polymer-solvent affinity account for the high reactivity of II. The high quantum efficiency, coupled with the advantage of facile product separation, warrants the practical application of interfacial sensitization.     

Hydrogen bonding effect on photocurrent generation in porphyrin-fullerene photoelectrochemical devices

A hydrogen bonding effect on photocurrent generation has been evaluated successfully in a mixed film of porphyrin and fullerene with hydrogen bonding on an ITO electrode, which exhibits efficient cathodic photocurrent generation as compared to the reference system without hydrogen bonding.     

Coprecipitation with yttrium phosphate as a separation technique for iron(III), lead, and bismuth from cobalt, nickel, and copper matrices

The coprecipitation behavior of 44 elements (47 ions because of chromium(III,VI), arsenic(III,V), and antimony(III,V)) with yttrium phosphate was investigated at various pHs. Yttrium phosphate could quantitatively coprecipitate iron(III), lead, bismuth, and indium over a wide pH range; however, 18 ions, including alkali metals and oxo anions, such as vanadium(V), chromium(VI), molybdenum(VI), tungsten(VI), germanium(IV), arsenic(III,V), selenium(IV), and tellurium(VI), were scarcely collected. In addition, 19 ions, including cobalt, nickel, and copper(II), were hardly coprecipitated at pHs below about 3. Based on these results, the separation of iron(III), lead, and bismuth from cobalt, nickel, and copper(II) matrices was investigated. Iron(III), lead, and bismuth ranging from 0.5 to 25 μg could be separated effectively from a solution containing 0.5 g of cobalt, nickel, or copper at pH 3.0. The separated iron(III), lead, and bismuth could be determined by inductively coupled plasma atomic emission spectrometry using internal standardization. The detection limits (3σ, n = 7) of iron(III), lead, and bismuth were 0.008, 0.137, and 0.073 μg, respectively. The proposed method was applied to the analyses of metals and chlorides of cobalt, nickel, and copper.     

Acid-base and spectroelectrochemical properties of doubly N-confused porphyrins

The cis-doubly N-confused porphyrin, H2N2CP, containing two adjacent confused pyrrole rings has been investigated from the point of view of its acid-base and electrochemical behavior in dichloromethane. This novel porphyrin isomer can form two metal-carbon bonds in the central core, stabilizing metal ions in unusually high oxidation states. Furthermore, the two outside N-pyrrole atoms remain available for acid-base and specific solvent interactions. Protonation of the pyrrole N atoms proceeds according to two successive steps, while only a single deprotonation step has been observed in the presence of bases. Similarly, in the case of the silver and copper complexes the protonation and deprotonation of the outer pyrrole rings have been detected, confirming the structure of the metalated species as M(III)-HN2CP. The electrochemical reduction of the metal ions (III/II redox process) and oxidation of the macrocycle ring have been detected respectively at -0.9 and 1.4 V based on spectroelectrochemical measurements in conjunction with the acid/base equilibrium studies. Additional waves observed around -0.5 and 1.3 V have been assigned to redox processes involving water molecules associated with the doubly N-confused porphyrins.     

Photochemical behavior of sitafloxacin, fluoroquinolone antibiotic, in an aqueous solution

Sitafloxacin (STFX) hydrate, an antimicrobial agent, is photo-labile in aqueous solutions. The photodegradation rates (k) in neutral solutions were higher than those observed in acidic and alkaline solutions and maximum at the maximum absorption wavelength of STFX. The structures of photodegradation products were elucidated as 7-[7-amino-5-azaspiro[2.4]heptan-5-yl]-6-fluoro-1,4-dihydro-4-oxo-3-quinolinecarboxylic acid and 1-(1-amino-2-[16-fluoro-1-(2-fluoro-1-cyclopropyl)-1,4-dihydro-4-oxo-3-quinolin-7-yl]-amino]ethyl)cyclopropanecarbaldehyde. This implies that dechlorination is the key step in the photodegradation of STFX. The effect of halide ions on the photodegradation of STFX was estimated by observing the increments in the photostability of STFX with the addition of chloride ions. In contrast, in the presence of bromide ions, instead of increased photostability of the STFX rate, a new photodegradation product in the presence of bromide ion was observed. The structure of this new photodegradation product was an 8-bromo form of STFX, which was substituted for chlorine at the 8-position, so the dissociation of C-Cl bond at the 8-position of STFX was the rate-limiting step in the initial process of the photodegradation. STFX generated .C (carbon centered radical) and .OH (hydroxyl radical) in the process of photodegradation in a pH 4.0 buffer. On the contrary, STFX did not generate C in the presence of chloride ion in a pH 4.0 buffer. The .C was generated and then degraded into the above degradation products by photoirradiation in the absence of chloride ion, but the .C immediately reacted with chloride when it was present. As a result, the C-Cl bond was recovered leading to a possible increase in the apparent photostability.     

Supramolecular Cationic Tetraruthenated Porphyrin Induces Single-Strand Breaks and 8-Oxo-7,8-dihydro-2'-deoxyguanosine Formation in DNA in the Presence of Light

Abstract— The aim of this investigation is the evaluation of DNA interaction of with tetraruthenated porphyrin (TRP) and of DNA damage in the presence of light. Direct-fluorescence and electronic absorption measurements after incubation of DNA with TRP indicate strong binding between pBR322 DNA or calf thymus DNA with the modified porphyrin. Exposure of pBR322 DNA to TRP (up to 3 μ M ) and light leads to single-strand break formation as determined by the conversion of the supercoiled form (form I) of the plasmid into the nicked circular form (form II). Oxidative DNA base damage was evaluated by the detection of 8-oxo-7,8-dihydro-2'-deoxyguanosine (8-oxodGuo) after irradiation of calf thymus DNA in the presence of the TRP. The data demonstrated a dose and time dependence with each type of DNA damage. These data indicate (1) a specificity of the binding mode and (2) type I and II photoinduced mechanisms leading to strand scission activity and 8-oxodGuo formation. Accordingly, singlet molecular oxygen formation, after TRP excitation, was confirmed by near-infrared emission. From these investigations a potential application of TRP in photodynamic therapy is proposed.