Oligothiophene-containing coumarin dyes for efficient dye-sensitized solar cells

We have developed oligothiophene-containing coumarin dyes fully functionalized for dye-sensitized nanocrystalline TiO(2) solar cells (DSSCs). DSSCs based on the dyes gave good performance in terms of incident photon-to-current conversion efficiency (IPCE) in the range of 400-800 nm. A solar energy-to-electricity conversion efficiency (eta) of 7.4% was obtained with a DSSC based on 2-cyano-3-[5'-(1,1,6,6-tetramethyl-10-oxo-2,3,5,6-tetrahydro-1H,4H,10H-11-oxa-3a-aza-benzo[de]anthracen-9-yl)-[2,2']bithiophenyl-5-yl]acrylic acid (NKX-2677) under simulated AM 1.5G irradiation (100 mW cm(-2)) with a mask: short-circuit current density (J(sc)) = 13.5 mA cm(-2); open-circuit voltage (V(oc)) = 0.71 V; fill factor (FF) = 0.77. Transient absorption spectroscopy measurements indicated that electron injection from NKX-2677 to the conduction band of TiO(2) is very rapid (<100 fs), which is much faster than the emission lifetime of the dye (1.0 ns), giving a highly efficient electron injection yield of near unity.     

Multipoint recognition of catecholamines by hydrindacene-based receptors accompanied by the complexation-induced conformational switching

The molecular recognition of catecholamines by hydrindacene-based receptors 1 and 2, as well as the durene-based receptor 3, and the guest-induced conformational changes are reported. These receptors selectively bind adrenaline and dopamine salts through the guests' ammonium group and 3-hydroxyl group on the aromatic ring. In the case of adrenaline, an additional hydrogen bond with a benzylic hydroxyl group is formed. In 2 % CD3CN/CDCl3, the association constants are of the order of 10(4) M(-1), which is much larger than with guests without the 3-hydroxyl groups (10(3) M(-1)). The two amide groups of receptor 1 can rotate freely around the C(aromatic)--C(amide) bond, whereas the tert-amide in 2 changes between two stable conformations at a slow enough rate to allow detection by (1)H NMR spectroscopy. In the absence of a guest molecule, the syn-conformer is less stable than the anti-conformer. On complex formation with adrenaline, the syn-conformer becomes dominant due to an intramolecular dipole-reversal effect in addition to multipoint hydrogen bonding.     

Second-order nonlinear optical properties from poled silicate channel-waveguide

Thin film waveguides of germanosilicate glass are fabricated byrf-sputtering. Second-order nonlinearity ofd ₃₃=3.2 pm/V is obtained from electrically poled film, and the lifetime of the nonlinearity is found to be310 years. The poled channel-waveguide is prepared and the Cerenkov-type phase-matched frequency doubling is successfully observed.     

Synthesis of poly(diallyl phthalate) and silica gel polymer hybrids utilizing π–π interactions

We report here the synthesis of homogeneous polymer hybrids of poly(diallyl phthalate) (PDAP) and silica by utilizing π–π interactions. Use of arylalkoxysilanes such as phenyltrimethoxysilane (PhTMOS), phenethyltrimethoxysilane (PhenethylTMOS) and mesityltrimethoxysilane (MesTMOS) as sources for inorganic phases resulted in optically transparent PDAP-silica polymer hybrids in a wide range of organic and inorganic content ratios. On the other hand, alkoxysilanes such as tetramethoxysilane (TMOS), methyltrimethoxysilane (MTMOS) and i-butyltrimethoxysilane (iBuTMOS) resulted in phase separated, turbid solids. A mixture of tetramethoxysilane (TMOS) and PhTMOS was also studied for the synthesis of PDAP-silica gel polymer hybrids to control the cross-linking density in the inorganic phase. Homogeneity was found to be improved with an increase in PhTMOS content. These homogeneous PDAP polymer hybrids were found to have high thermal stability which wasachieved by nano-scale dispersion of PDAP in silica through extensiveinterface interactions. The homogeneity of the polymer hybrids was confirmed by SEM and TEM, which demonstrate a nanometer level integration of the organic polymer and the inorganic phase.     

TMS triflate-catalyzed cleavage of prenyl (3-methylbut-2-enyl) ester

[reaction: see text] Prenyl (3-methylbut-2-enyl) ester is catalytically cleaved by TMS triflate affording carboxylic acid and isoprene in high yield under mild conditions with high chemoselectivity without causing epimerization of the neighboring chiral center.     

Pi-face-selective Diels-Alder reactions of 3,4-di-tert-butylthiophene 1-oxide and 1-imide and formation of 1,2-thiazetidines

3,4-Di-tert-butylthiophene 1-oxide (1a) reacted with a series of electron-deficient alkenic dienophiles at its syn-pi-face relating to the S=O bond to give [4+2] adducts in excellent yields. The 1-oxide 1a also reacted even with angle-strained dienophiles acenaphthylene and norbornene at its syn-pi-face to afford [4+2] adducts; in the latter case, norbornene reacted exclusively at its exo-pi-face. The oxide 1a reacted with dimethyl acetylenedicarboxylate to produce dimethyl 4,5-di-tert-butylphthalate in high yield with spontaneous extrusion of SO from the initial adduct even at room temperature. Similarly, 3,4-di-tert-butylthiophene 1-(p-toluenesulfonyl)imide (3a) reacted with alkenic dienophiles at its syn-pi-face relating to the S=N bond to give [4+2] adducts in good yields. The reaction of 3a with 4-phenyl-1,2,4-triazoline-3,5-dione (PTAD) afforded a 1,2-thiazetidine 12a, the first example of S-unoxidized 1,2-thiazetidine, in good yield, through rearrangement of the initial [4+2] adduct. The molecular structure of 12a is discussed on the basis of the X-ray crystallographic analysis. Comparison of the foregoing reactions leads to the conclusion that the 1-oxide 1a is more reactive as a diene than the 1-imide 3a, which is more reactive than 3,4-di-tert-butylthiophene 1,1-dioxide. The origin of the syn-pi-face selectivities of 1a and 3a in Diels-Alder reactions is discussed in terms of the orbital mixing rule and steric effect and also based on B3LYP/6-31G(d) calculations.     

Photoluminescence enhancement of PEG-modified YAG:Ce3+ nanocrystal phosphor prepared by glycothermal method

Y3Al5O12:Ce3+ (YAG:Ce3+) nanocrystals were synthesized in 1,4-butylene glycol (BG) with and without poly(ethylene glycol) (PEG) by the glycothermal method. The internal quantum efficiency of the photoluminescence (PL) corresponding to the 5d --> 4f transition of Ce3+ in the YAG:Ce3+ nanocrystal increased from 21.3 to 37.9% by addition of PEG, while no appreciable change in the primary particle size, the crystallite size, and the lattice distortion was recognized by transmission electron microscopy and X-ray diffractometry. The thermogravimetry-differential thermal analysis, Fourier transform infrared absorption spectroscopy and 1H --> 13C cross-polarization magic angle spinning nuclear magnetic resonance (CP-MAS NMR) confirmed the preferential coordination of PEG to the YAG:Ce3+ nanocrystal. 27Al single-pulse excitation MAS NMR reveals that the ratio of the 4-fold coordination site to the 6-fold coordination site increased from 0.53 to 0.72 by addition of PEG. We conclude that the surface modification of the YAG:Ce3+ nanocrystal by PEG induces the surface passivation, the prevention of the oxidation of Ce3+ to Ce4+, the promotion of the incorporation of Ce3+ into YAG and the local structural rearrangement, resulting in the PL enhancement.     

Rhodium-catalyzed isomerization of alpha-arylpropargyl alcohols to indanones: involvement of an unexpected reaction cascade

A rhodium-catalyzed isomerization of alpha-arylpropargyl alcohols to indanones has been developed under mild conditions. Considering the ease of preparation of these propargyl alcohols (terminal alkynes + aromatic aldehydes), this method provides a new way of constructing indanones with high efficiency. By the mechanistic investigations using deuterium-labeled substrates, it has also been demonstrated that the reaction goes through an unexpected cascade, with a 1,4-hydrogen shift being the turnover-limiting step of the catalytic cycle.     

Highly active, immobilized ruthenium catalysts for oxidation of alcohols to aldehydes and ketones. Preparation and use in both batch and flow systems

A novel, highly active immobilized ruthenium catalyst, which can be successfully used in oxidation of alcohols to aldehydes and ketones, has been developed. In contrast to most immobilized catalysts, the Ru catalyst has activity that is higher than that of the original non-immobilized catalyst. In a batch system, the Ru catalyst was recovered and reused several times without loss of activity. The catalyst was also applied to a flow system, in which excellent conversions and yields were demonstrated. No leaching of Ru was observed in both cases.     

Self-oscillation of polymer chains induced by the Belousov-Zhabotinsky reaction under acid-free conditions

A novel self-oscillating polymer was prepared by utilizing the Belousov-Zhabotinsky (BZ) reaction. In this study, a sulfonic acid group was newly introduced as a pH-control site into the copolymer of N-isopropylacrylamide, and the ruthenium complex was introduced as a catalyst site. By introducing the pH-control site, we succeed in causing the soluble-insoluble self-oscillation of the polymer solution under acid-free conditions in which only two BZ substrates, malonic acid and sodium bromate, were present as added agents. The self-oscillating behavior was remarkably influenced by the temperature and polymer concentration, which reflects the intermolecular aggregative capacity of the polymer chains in the reduced state to change the lower critical solution temperature. This achievement of self-oscillation of polymer chains under acid-free conditions may lead to their practical use as novel biomimetic materials under biological conditions.